Home / Equipment / 6M 240 | Utility Tractors

6M 240 | Utility Tractors

6M 240 | Utility Tractors

Equipment
John Deere
#6240m

Disclaimer |

Characteristics

  • Engine HP: 264 Max | 240 Rated
  • John Deere PowerTech™ PSS Engine
  • Transmission Options: IVT™ 25 mph (40 km/h) or 31 mph (50 km/h)
  • Up to 20 HP Boost with IPM in non-stationary PTO and transport applications

Note that this product is available in store only.
Get pre-approved for financing
SKU: 6240m Categories: , ,

Description

The 6M 240 is a powerful, light, and swift tractor that is designed for transport. Equipped with a stepless Infinitely Variable Transmission.

Specifications

Engine description John Deere PowerTech™ PSS
Engine displacement 6.8 L
415 cu in.
Rated engine power 240 hp
177 kW
Maximum engine power 264 hp
194 kW
Rated PTO power (hp SAE) 194 hp
145 kW
Maximum PTO power At 1000 PTO rpm: 158 kW
213 hp
Transmission type Standard: Infinitely variable transmission (IVT™) 40 km/h
Optional: IVT 50 km/h
Hydraulic pump rated output Standard: 45-cc pump: 114 L/min
30 gpm
Optional: 60-cc pump: 155 L/min
41 gpm
Rear hitch category (SAE designation) 3N/3
Base machine weight 8700 kg
19,180 lb
Description John Deere PowerTech™ PSS
Engine type 6068HL551
Rated speed 2100 rpm
Aspiration Dual turbochargers, variable geometry turbo with fixed geometry turbo in series
Emission level Final Tier 4 / Stage V
After treatment type Diesel particle filter (DPF) with diesel oxidation catalyst (DOC) and selective catalytic reduction (SCR) using diesel exhaust fluid (DEF)
Displacement 6.8 L
415 cu in.
Rated power 240 hp
177 kW
Rated PTO power (hp SAE) 194 hp
145 kW
Maximum PTO power At 1000 PTO rpm: 158 kW
213 hp
Intelligent Power Management (IPM) Transport and/or mobile PTO applications
Additional engine power (hp ISO) at 2100 rpm: 14.9 kW
20 hp
Power boost 10 percent
Maximum engine power 264 hp
194 kW
Engine peak torque 1124 Nm
PTO torque rise 40 percent
Type Standard: Infinitely variable transmission (IVT™) 40 km/h
Optional: IVT 50 km/h
Reverser Electronic left-hand reverser
Creeper Not available
Type Standard/optional: Pressure-and-flow compensated (PFC) system with Load Sensing function
Pump rated output Standard: 45-cc pump: 114 L/min
30 gpm
Optional: 60-cc pump: 155 L/min
41 gpm
Number of rear selective control valves (SCVs) Standard: Two ISO couplers
Optional: Two to four ISO couplers
Number of mid selective control valves (SCVs) Up to three
Joystick SCV control Mechanical/electrical
Remote control valves available Standard
Hitch category (SAE designation) 3N/3
Rear hitch lift capacity (SAE designation) Standard: Category 3/3N: 4600 kg
10,132 lb
Optional: Category 3/3N: 5151 kg
11,346 lb
Maximum lift capacity behind lift points Standard: Category 3/3N: 8050 kg
17,731 lb
Optional: Category 3/3N: 9050 kg
19,934 lb
Sensing type Electronic at lower link
Rear axle differential lock Electrohydraulically with oil-cooled clutch
Drawbar category Category 3
Maximum vertical load 1800-3000 kg (3968-6614 lb)
Maximum vertical load dependent on drawbar position
Type Electrohydraulically operated, oil-cooled, multi-disc design
Engine rpm (at rated PTO speeds) 540 PTO: 1960 rpm
1000 PTO: 1960 rpm
PTO actuation In-cab switch and optional external fender-mounted remote control
Category 3N
Electric power Seven-pin electrical socket
Standard lift capacity At hook ends: 3300 kg
7269 lb
Front power take-off (PTO) Electrohydraulically engaged with oil-cooled, multi-disc design
PTO speed 1000 PTO: 1967 rpm
Type Standard: Rack-and-pinion rear axle - 92-mm (3.6 in.) shaft (2.550-m/100.4 in.)
Optional: flange-type rear axle
Rack-and-pinion rear axle - 100-mm (3.94 in.) shaft (2806-mm/110.5 in.)
Rack-and-pinion rear axle - 100-mm (3.94 in.) shaft (2550-mm/100.4 in.)
Rack-and-pinion rear axle - 100-mm (3.94 in.) shaft (3009-mm/118.5 in.)
Rear differential lock Electrohydraulically with oil-cooled clutch
Type Standard: MFWD
Optional: Triple-Link Suspension (TLS) MFWD axle (hydro-pneumatic, permanently active, triple link, self-leveling suspension with 100-mm [3.9-in.] suspension range)
Triple-Link Suspension MFWD with brakes
Front axle differential lock Standard: Self-locking differential
Optional: hydrualic actuated
Front 420/85R30
Rear 480/80R46
Type Dynamic load sensing, hydrostatic, flow metering
Alternator size Standard: 14 V/125 amp
Optional: 14 V/250 amp
Battery options Standard: 12 V/154 amp-hr
Optional: 12 V/174 amp-hr
Rollover protective structure, OOS Gearshift location - console/floor
Console
Seat Standard: Standard seat with air suspension
Optional: Economy seat with mechanical suspension
Cab suspension Optional: Mechanical Cab Suspension (MCS)
Instructional seat Optional
Display Cornerpost display (right-hand A-post)
Functionality: Performance monitor and individual settings
Radio Standard: Standard AM/FM stereo
Inner cab volume 3.0 m3
105.9 cu ft
dB(A) rating 70 dBA
Cab glass area 4.85 m2
Wheelbase 2800 mm
110.2 in.
Overall width 2550 mm
100.3 in.
(420/85R30 & 480/80R46)
Overall length 4984 mm
196.2 in.
(inc. weight bracket)
Overall height 3060 mm
120.5 in.
Front axle center 545 mm
21.4 in.
(ground clearance)
Approximate shipping weight, Open;Cab Cab: 8500 kg
18,739 lb
Base machine weight Front axle
3480 kg
7672 lb
Rear axle
5200 kg
11,508 lb
8700 kg
19,180 lb
Maximum permissible weight 12,700 kg
27,999 lb
Crankcase oil volume 23.5 L
6.2 U.S. gal.
Fuel tank 325 L
85.9 U.S. gal.
Diesel exhaust fluid (DEF) tank 20 L
5.3 U.S. gal.
Cooling system 28 L
7.4 U.S. gal.
Transmission-hydraulic system AutoPowr/IVT: 80.0 L
21.0 U.S. gal.
Interval for engine oil change 500 hours
Interval for hydraulic/transmission oil change 1500 hours
Interval for engine coolant change 6000 hours
Loader 660R
Lift capacity at full height MSL: 2592 kg
5716 lb
NSL: 2737 kg
6035 lb
Maximum lift height MSL: 4.5 m
178.8 in.
NSL: 4.5 m
177.3 in.
Guidance Optional: AutoTrac™ with Universal Display
Telematic Standard: JDLink™
Remote diagnostics Standard: JDLink™
Country of manufacture Germany
Date collected 25-Jun-24

Related products