Accueil / Équipements / Agriculture / Outils de travail de sol / Équipement de labourage / Labourage | Cultivateur prairie 2230LL Level-lift™

Labourage | Cultivateur prairie 2230LL Level-lift™

Labourage | Cultivateur prairie 2230LL Level-lift™

Équipement de labourage
John Deere
#2230ln

Termes et conditions |

Caractéristiques

  • Largeurs de travail allant de 7,2 m (23 pi 6 po) à 18,4 m (60 pi 6 po)
  • Configurations à trois et à cinq sections
  • Châssis en treillis

Notez que ce produit est disponible en succursale seulement.
Obtenez une pré-approbation pour le financement
UGS : 2230ln Catégorie : , , ,

Description

Vous pouvez atteindre un niveau de productivité inédit grâce aux cultivateurs prairie 2230 entièrement redessinés.

Spécifications

Type Over-center fold
3 sections Option 1: 23 ft, 6 in.
Option 2: 25 ft, 6 in.
Option 3: 27 ft, 6 in.
Option 4: 29 ft, 6 in.
Option 5: 31 ft, 6 in.
Option 6: 33 ft, 6 in.
Option 7: 35 ft, 6 in.
Option 8: (Low Transport) 38 ft, 6 in.
Option 9: (Low Transport) 43 ft, 6 in.
5 sections Option 10: 42 ft, 6 in.
Option 11: 46 ft, 6 in.
Option 12: 50 ft, 6 in.
Option 13: 52 ft, 6 in.
Option 14: 56 ft, 6 in.
Option 15: 60 ft, 6 in.
3 sections Option 1: 13 ft, 9 in.
Option 2: 13 ft, 9 in.
Option 3: 13 ft, 9 in.
Option 4: 13 ft, 9 in.
Option 5: 15 ft, 8 in.
Option 6: 15 ft, 8 in.
Option 7: 15 ft, 9 in.
Option 8: 14 ft, 0 in.
Option 9: 18 ft, 0 in.
5 sections Option 10: 14 ft, 0 in.
Option 11: 14 ft, 0 in.
Option 12: 14 ft, 0 in.
Option 13: 16 ft, 1 in.
Option 14: 16 ft, 1 in.
Option 15: 16 ft, 1 in.
3 sections Option 1: 11 ft, 3 in.
Option 2: 12 ft, 0 in.
Option 3: 12 ft, 11 in.
Option 4: 13 ft, 10 in.
Option 5: 13 ft, 11 in.
Option 6: 14 ft, 10 in.
Option 7: 15 ft, 9 in.
Option 8: 13 ft, 6 in.
Option 9: 14 ft, 4 in.
5 sections Option 10: 12 ft, 7 in.
Option 11: 13 ft, 5 in.
Option 12: 14 ft, 4 in.
Option 13: 14 ft, 2 in.
Option 14: 15 ft, 2 in.
Option 15: 16 ft, 2 in.
Centimètres (pouces) Up to 5 in.
127 mm
Km/h (mi/h) 6 to 10 mph
10 to 16 km/h
Puissance par 30,48 cm 8 to 12 hp/ft
19.6 - 29.4 kw/m
De série Single-point depth control in-base
Options Add TruSet™ in-cab depth/pressure control
De série 2 SCVs (lift and fold) at 2500 psi for optimum raise times, additional SCV needed for optional rolling basket down-pressure
De série 9-pin connector for warning lights
Options If adding TruSet, tractor must be GreenStar™ system-ready
Type Level-lift™ 6x10-in. (152x254-mm) T-hitch, cast-steel hitch link, optional rear hitch
Tuyauterie Rank tubes: 4x4 in.
102x102 mm
Center frame fore-aft tubes: For 5 rank - 2x6 in.
50x152 mm
Center frame fore-aft tubes: For 6 rank - 2x8 in.
50x203 mm
Wing fore-aft tubes: 2x6 in.
Nombre de rangs 3 sections
Option 1: 9-ft (2.7-m) center frame with 5-rank tube frame
Option 2: 9-ft (2.7-m) center frame with 5-rank tube frame
Option 3: 9-ft (2.7-m) center frame with 5-rank tube frame
Option 4: 9-ft (2.7-m) center frame with 5-rank tube frame
Option 5: 11-ft (metric) center frame with 5-rank tube frame
Option 6: 11-ft (metric) center frame with 5-rank tube frame
Option 7: 11-ft (metric) center frame with 5-rank tube frame
Option 8: 9-ft (2.7-m) center frame with 5-rank tube frame
Option 9: 11-ft (metric) center frame with 5-rank tube frame
5 sections
Option 10: 9-ft (2.7-m) center frame with 5-rank tube frame
Option 11: 9-ft (2.7-m) center frame with 5-rank tube frame
Option 12: 9-ft (2.7-m) center frame with 5-rank tube frame
Option 13: 11-ft (metric) center frame with 5-rank tube frame
Option 14: 11-ft (3.4-m) center frame with 6-rank tube frame
Option 15: 11-ft (3.4-m) center frame with 6-rank tube frame
Fore-and-aft clearance On 9-ft and 11-ft (2.7-m and 3.4-m) center frames: 134 in.
3.4 m
On 15-ft (4.6-m) center frames: 164 in.
4.2 m
Dégagement sous le châssis 24 in.
610 mm
Centimètres (pouces) 6-in. (152-cm) split-the-middle, 9-in. (229-mm)* and S-tine 4.5-in. (114- mm)* options (*spacing may not be exact in all locations)
Option 1 Spéc
C-shank 3/4 x 1-3/4 x 24 in.
Force de déclenchement
200 lb
Hauteur de déclenchement
10 in.
Profondeur de fonctionnement maximale
5 in.
Dégagement sous le châssis
24 in.
Espacement
True 6-in. Spilt-the-Middle Spacing
TruPosition™
Option 2 Spéc
5/8 X 1-3/4 in.
Force de déclenchement
150 lb
Hauteur de déclenchement
10 in.
Profondeur de fonctionnement maximale
5 in.
Dégagement sous le châssis
24 in.
Espacement
6 or 9 in.
TruPosition™
Option 3 Spéc
0.5 x 1.75 in.
Dégagement sous le châssis
24 in.
Espacement
4.5 in.
S-tine
Options Wide variety of sweeps, shovels, and points
Type Center frame tires on Walk-Over™ tandem wheels (bias-ply tire option available)
3 sections Option 1: (4) IF280/70 R15 134D tires
Option 2: (4) IF280/70 R15 134D tires
Option 3: (4) IF280/70 R15 134D tires
Option 4: (4) IF280/70 R15 134D tires
Option 5: (4) IF280/70 R15 134D tires
Option 6: (4) IF280/70 R15 134D tires
Option 7: (4) IF280/70 R15 134D tires
Option 8: (4) IF320/70 R15 144D tires
Option 9: (4) IF320/70 R15 144D tires
5 sections Option 10: (4) IF320/70 R15 144D tires
Option 11: (4) IF320/70 R15 144D tires
Option 12: (4) VF285/70 R19.5 150D tires
Option 13: (4) VF285/70 R19.5 150D tires
Option 14: (4) 340/65 R18 Michelin 149A8 tires
Option 15: (4) 340/65 R18 Michelin 149A8 tires
Type Wing frame tires on Walk-Over™ tandem wheels (radial tire option available)
3 sections Option 1: (4) 11L-15 FI LR D tires
Option 2: (4) 11L-15 FI LR D tires
Option 3: (4) 11L-15 FI LR D tires
Option 4: (4) 11L-15 FI LR D tires
Option 5: (4) 11L-15 FI LR D tires
Option 6: (4) 11L-15 FI LR D tires
Option 7: (4) 11L-15 FI LR D tires
Option 8: (4) 12.5-L-15 FI LR D tires
Option 9: (4) 12.5-L-15 FI LR D tires
5 sections Option 10: (4) 12.5-L-15 FI LR D tires
Option 11: (4) 12.5-L-15 FI LR D tires
Option 12: (4) 12.5-L-15 FI LR D tires
Option 13: (4) 12.5-L-15 FI LR D tires
Option 14: (4) 12.5-L-15 FI LR D tires
Option 15: (4) 12.5-L-15 FI LR D tires
Type Mechanical stabilizer wheels and tires (radial tire option available)
3 sections Option 1: Optional: (2) 9.5L-15 FI LR D tires
Option 2: Optional: (2) 9.5L-15 FI LR D tires
Option 3: Optional: (2) 9.5L-15 FI LR D tires
Option 4: Optional: (2) 9.5L-15 FI LR D tires
Option 5: Optional: (2) 9.5L-15 FI LR D tires
Option 6: Optional: (2) 9.5L-15 FI LR D tires
Option 7: Optional: (2) 9.5L-15 FI LR D tires
Option 8: Optional: (2) 9.5L-15 FI LR D tires
Option 9: Optional: (2) 9.5L-15 FI LR D tires
5 sections Option 10: Base: (2) 9.5L-15 FI LR D tires ; Optional Additional (2) 9.5L-15 FI LR D tires
Option 11: Base: (2) 9.5L-15 FI LR D tires ; Optional Additional (2) 9.5L-15 FI LR D tires
Option 12: Base: (2) 9.5L-15 FI LR D tires ; Optional Additional (2) 9.5L-15 FI LR D tires
Option 13: Base: (2) 9.5L-15 FI LR D tires ; Optional Additional (2) 9.5L-15 FI LR D tires
Option 14: Base: (2) 9.5L-15 FI LR D tires ; Optional Additional (2) 9.5L-15 FI LR D tires
Option 15: Base: (2) 9.5L-15 FI LR D tires ; Optional Additional (2) 9.5L-15 FI LR D tires
Option 16: Base: (2) 9.5L-15 FI LR D tires ; Optional Additional (2) 9.5L-15 FI LR D tires
Option 17: Base: (2) 9.5L-15 FI LR D tires ; Optional Additional (2) 9.5L-15 FI LR D tires
Spike tooth harrow option 1 Espacement des rangs
12 in.
Espacement des socs à pointe
10.5 in.
Espacement efficace
3-bar: 3.5 in.
6-bar: 1.75 in.
Dimensions des socs à pointe
.75 x .75 x 12 in.
Angle
23 to 51 degree (angle)
Réglages
Tool-free 3-Position Pin Adustment
6-bar spike-tooth harrow
Coil tine harrow option 1 Espacement des rangs
15 in.
Espacement des dents
9 in.
Espacement efficace
2.25 in.
Dimensions des dents
16 in. long
Angle
36 to 75 degree (angle)
Réglages
Tool-free 4-Position Pin adjustments ranging from 36 to 75 degrees
4-bar coil-tine harrow
Rolling basket harrow option 1 Espacement des rangs
15 in.
Espacement efficace
3 in.
Dimensions des socs à pointe/dents
16 in. long in.
Diamètre du panier
14 in.
Type de barre
Round
Taille de la barre
1-in. Round Bar, 1/8 in wall thickness
Roulements
Maintenance-free
Réglages
Tool-free Harrow adjustments ranging from 36 to 75 degrees & Hydraulically Adjustable Baskets up to 800 psi
3-bar coil-tine with round-bar basket
Rolling basket harrow option 2 Espacement des rangs
15 in.
Espacement efficace
3 in.
Dimensions des socs à pointe/dents
16 in. long
Type de barre
Flat
Taille de la barre
38 x 6 mm
1.5 x 0.25 in.
Roulements
Maintenance-free
Réglages
Tool-free Harrow adjustments ranging from 36 to 75 degrees & Hydraulically Adjustable Baskets up to 800 psi
3-bar coil tine with flat-bar basket
Rolling basket harrow option 3 Espacement des socs à pointe/dents
267 mm
10.5 in.
Espacement efficace
44 mm
1.75 in.
Dimensions des socs à pointe/dents
19 x 19 x 305 mm
3/4 x 3/4 x 12 in.
Réglages
Tool-free Harrow Adjustments 23 - 51 degrees & Hydraulically Adjustable Baskets up to 800 psi
3-bar spike tooth with round-bar basket
Rolling basket harrow option 4 Espacement des socs à pointe/dents
267 mm
10.5 in.
Espacement efficace
44 mm
1.75 in.
Dimensions des socs à pointe/dents
19 x 19 x 305 mm
3/4 x 3/4 x 12 in.
Réglages
Tool-free Harrow Adjustments 23 - 51 degrees & Hydraulically Adjustable Baskets up to 800 psi
3-bar spike tooth with flat-bar basket
Classification du poids au timon Varies by Working Width 1500lb vertical weight
Tuyaux et accouplements hydrauliques 2 circuits provided

Produits similaires