Home / Equipment / Tractors / Row crop Tractors / 6 Series Tractors / Utility Tractors | 6R 185

Utility Tractors | 6R 185

Utility Tractors | 6R 185

6 Series Tractors
John Deere
#6185rl

Disclaimer |

Characteristics

  • John Deere FT PowerTech™ 6-cylinder engines
  • Engine HP: 205 HP Max/185 HP Rated with up to 40 additional HP (IPM)
  • Transport easily with high power and low weight
  • Optional CommandPRO™ puts tractor and implement control at your fingertips

Note that this product is available in store only.
Get pre-approved for financing
SKU: 6185rl Categories: , , ,

Description

The 6R 185 has the hydraulic power to make material handling its specialty, and enough versatility for about any chore you have on the ranch, farm or worksite.

Specifications

Engine displacement 6.8 L
415 cu in.
Rated engine power PS (hp ISO) at rated engine speed (EU 2016/1628) 97/68EC: 136 kW
185 hp
Maximum engine power PS (hp ISO) at max engine speed (EU 2016/1628) 97/68EC: 150 kW
204 hp
Rated PTO power (hp SAE) 110 kW
147 hp
Transmission type Standard: Infinitely variable transmission (IVT™), 0.05-42 km/h 0.03-26 mph
Optional: IVT, 0.05-50 km/h 0.03-31 mph
Hydraulic pump rated output Standard: 45 cc pump: 114 L/min
30 gpm
Optional: 60 cc pump: 155 L/min
41 gpm
Rear hitch category (SAE designation) Category 3/3N: 4170 kg
9193 lb
Base machine weight 8120 kg
17,900 lb
Engine type Diesel, in-line, 6-cylinder, wet-sleeve cylinder liners with four valves in head
Engine family NJDXL06.8324
Rated speed 2100 rpm
Aspiration Turbocharged, variable geometry turbocharger with air-to-air aftercooling and cooled exhaust gas recirculation
Emission level Final Tier 4
After treatment type DOC/DPF/SCR
Displacement 6.8 L
415 cu in.
Rated engine power PS (hp ISO) at rated engine speed (EU 2016/1628) 97/68EC: 136 kW
185 hp
Rated PTO power (hp SAE) 110 kW
147 hp
Intelligent Power Management (IPM) Transport and/or mobile PTO applications
Additional engine power (hp ISO) at 2100 rpm: 29.8 kW 40 hp
40 hp
Power boost 10 percent
Maximum engine power PS (hp ISO) at max engine speed (EU 2016/1628) 97/68EC: 150 kW
204 hp
Engine peak torque At 1,600 rpm: 866 Nm
638 lb-ft
PTO torque rise 40 percent
Type Standard: Infinitely variable transmission (IVT™), 0.05-42 km/h 0.03-26 mph
Optional: IVT, 0.05-50 km/h 0.03-31 mph
Reverser Left-hand electrical reverser
Type Closed-center, pressure-and-flow compensated
Pump rated output Standard: 45 cc pump: 114 L/min
30 gpm
Optional: 60 cc pump: 155 L/min
41 gpm
Available flow at a single rear SCV 100 L/min
26 gpm
Number of rear selective control valves (SCVs) Standard: Three ISO couplers
Optional: Three to five ISO couplers
Number of mid selective control valves (SCVs) Up to three
Joystick SCV control Available
SCV control Standard: Mechanical
Optional: Electronic
Remote control valves available Available: Remote control switch
Hitch category (SAE designation) Category 3/3N: 4200 kg
9260 lb
Maximum lift capacity behind lift points 8100 kg
17,833 lb
*directly at coupling points
Sensing type Electrohydraulic
Rear axle differential lock Electrohydraulic
Drawbar category Category 2
Maximum vertical load Category 2: 1600-3000 kg
3300-6600 lb
Maximum vertical load dependent on drawbar position
Type Independent
Standard: 540, 540E, 1000 rpm reversible shaft: 35 mm
1.375 in.
Engine rpm (at rated PTO speeds) 1967 engine rpm at 540 rpm PTO
1753 engine rpm at 540E rpm PTO
2000 engine rpm at 1000 rpm PTO
PTO actuation Electrical modulation
Category Category 3N
Electric power Seven-pin electrical socket
Optional: Three-pin and ISOBUS socket
Standard lift capacity At hook ends: 3300 kg
7280 lb
Front power take-off (PTO) 1000 rpm, clockwise rotation (from driving position)
PTO speed Engine at PTO speed (1000): 1969 rpm
Type Rack and pinion, 2550 mm
100.4 in.
Rack and pinion, 2806 mm
110.5 in.
Flange: 1664 mm
65.5 in.
Final drive type Inboard planetary three pinion
Differential controls Full-locking electrohydraulic
Front axle differential lock MFWD: Limited slip
TLS: Limited slip
TLS with brakes: Full-locking electrohydraulic
Rear 480/80R42 R1/R1W Radial
Wheel tread range MFWD: 1524-2235 mm 60-88 in.
TLS: 1524-2235 mm 60-88 in.
Type Hydrostatic power
Alternator size Standard: 200 amp
Optional: 250 amp
Battery options 12 V
Working lights Standard: 14 halogen
Optional: 12 light-emitting diode (LED) plus two halogen
Type of bulb in headlight (Halogen, Zenon, LED) Standard: 65-W halogen W
Optional: LED
Total cold cranking amps 1230 CCA
With cold weather package or IVT: 1400 CCA
Seat Degree of seat swivel, left hand
CommandARM: 7.5 degree
Degree of seat swivel, right hand
CommandARM: 30 degree
Standard: Air suspension
Optional: Deluxe air suspension
Cab suspension Optional: Adaptive Hydraulic Cab Suspension Plus (HCS Plus)
Instructional seat Standard
Display Cornerpost display (right-hand A-post)
Standard: CommandCenter™ display, 25.7 cm
10.1 in.
Optional: CommandCenter display: 32.5 cm
12.8 in.
Radio Standard
Inner cab volume 3.33 m3
117.59 cu ft
dB(A) rating 71 dB
Cab glass area 6.11 m2
65.77 sq ft
Wheelbase MFWD: 2765 mm
108.8 in.
Overall width 1664 mm
65.5 in.
Overall length 4947 mm
194.8 in.
Overall height 3030 mm
119.3 in.
Front axle center 970 mm
38.2 in.
Approximate shipping weight, Open;Cab 8120 kg
17,900 lb
Base machine weight Front axle
3248 kg
7160 lb
Rear axle
4872 kg
10740 lb
Total
TLS, IVT, 600/65R28, 710/70R38, shipping fuel, front hitch -
Note: Weights will vary based on configuration
8120 kg
17,900 lb
Maximum permissible weight 11,750 kg
25,900 lb
Crankcase oil volume 23.5 L
6.2 U.S. gal.
Fuel tank 280 L
74 U.S. gal.
Diesel exhaust fluid (DEF) tank 16 L
4.2 U.S. gal.
Cooling system 27 L
7.2 U.S. gal.
Transmission-hydraulic system IVT: 62 L
16.4 U.S. gal.
Interval for engine oil change 750 hours
Interval for hydraulic/transmission oil change 1,500 hours
Interval for engine coolant change 6,000 hours
Loader 640R
660R
Lift capacity at full height 640R: 2148 kg
4736 lb
660R: 2421 kg
5337 lb
Maximum lift height 640R: 4300 mm
169 in.
660R: 4473 mm
176 in.
Country of manufacture Germany
Date collected 1-Jun-23

Related products