Description
8700A PrecisionCut Fairway Mower featuring programmable TechControl Display.
Home / Equipment / Golf Equipment / Fairway Mowers /
Fairway Reel Mowers | 8700A PrecisionCut™ Mower
Fairway MowersJohn Deere
#870avtc
Characteristics
- TechControl™ Display locks in performance, and uptime
- Set mowing turn speed to reduce scuffing
- AutoPedal™ lowers fuel consumption and noise
- Final Tier 4 without sacrificing horsepower
Specifications
| Maximum rated horsepower |
At 2800 rpm ISOC: 41.1 kW 55.1 hp |
| Drive pump | Tandem gear pump |
| Ground pressure |
69 kPa 10 psi |
| Throttle | Automatic controls with AutoPedal foot controls; manual control through TechControl display |
| Operator display | TechControl Display: Located on Command Arm; displays machine warnings, on-board electrical diagnostics; service timers on large easy to read screen; quick on the go settings for mow and transport speed; Turn Speed; Loadmatch™ and ON/OFF Cruise Control Use selection: all settings are pass code protected |
| Mowing speed |
0-12.8 km/h 0-8.0 mph |
| Cutting unit size |
Quick Adjust QA7: 55.9 cm cm 22 in. |
| Total width of cut |
254 cm 100 in. |
| Reel diameter |
17.8 cm 7 in. |
| Frequency of clip (FOC Reels) OR Blade tip speed (decks) |
10 Blade: 1.06 mm/km/h 10 Blade: 0.067 in./mph 8 Blade: 1.33 mm/km/h 8 Blade: 0.084 in./mph |
| Type | Direct Inject Turbocharged Diesel |
| Compliant emission regulation | United States and Canada Tier 4 |
| Horsepower |
Maximum rated horsepower At 2800 rpm ISOC: 41.1 kW 55.1 hp |
| Cylinders | Four |
| Displacement |
2.091 L 127.6 cu in. |
| Air cleaner | 2-stage dry element |
| Fuel | Diesel Up to B20 compliant |
| Cooling system | Liquid centrifugal pump; forward machine location for optimum cooling |
| Drive pump | Tandem gear pump |
| Hydraulic system capacity |
37.8 L 10 U.S. gal. |
| Fuel tank capacity |
60.6 L 16 U.S. gal. |
| Steering | Hydraulic power with double acting steering cylinder |
| Front drive tires | 26.5x14-12 turf |
| Steering tires | 20x12X10-8 turf |
| Ground pressure |
69 kPa 10 psi |
| Brakes | Internal hydraulic wet disc brakes with dynamic braking through closed loop hydrostatic system |
| ROPS | Standard; meets ISO 21299 Standard |
| Cutting units lowered |
Eight-blade QA7 cutting units lowered: 1254 kg Eight-blade QA7 cutting units lowered: 2765 lb |
| Throttle | Automatic controls with AutoPedal foot controls; manual control through TechControl display |
| Forward/reverse | 2-pedal |
| Mower lift | One-touch single handle |
| Parking brake | Electric Switch on Command Arm for Internal Wet Disk Brakes |
| Seat | Suspension seat with seat belts and arm rest; fore/aft adjustment; weight and lumbar adjustment |
| PTO | Electric Switch on Command Arm |
| Tilt steering | Left Foot operated for easy adjustment |
| Operator display | TechControl Display: Located on Command Arm; displays machine warnings, on-board electrical diagnostics; service timers on large easy to read screen; quick on the go settings for mow and transport speed; Turn Speed; Loadmatch™ and ON/OFF Cruise Control Use selection: all settings are pass code protected |
| Storage | Cup holder; two-way radio; large operator storage located on left hand side of operator station |
| Height with ROPS |
224 cm 88 in. |
| Length |
323 cm 127 in. |
| Transport width |
221 cm 87 in. |
| Mowing position width |
287 cm 113 in. |
| Ground speed |
Mowing 0-12.8 km/h 0-8.0 mph Transport 19.2 km/h 12 mph Reverse 9.6 km/h 6 mph |
| Number | Five |
| Size |
Quick Adjust QA7: 55.9 cm 22 in. |
| Total width of cut |
254 cm 100 in. |
| Height of cut |
Ten-blade QA7: 6.3-50.8 mm Ten-blade QA7: 0.25-2.0 in. Eight-blade QA7: 6.3-50.8 mm Eight-blade QA7: 0.25-2.0 in. |
| Frequency of clip (FOC Reels) OR Blade tip speed (decks) |
Rollers Front and rear: 7.6 mm 3 in. 10 Blade: 1.06 mm/km/h 10 Blade: 0.067 in./mph 8 Blade: 1.33 mm/km/h 8 Blade: 0.084 in./mph |
| Reel diameter |
17.8 cm 7 in. |
| Measuring standard | ISO 11201 |
| Attachments installed | FTCs, reels engaged |
| Actual Fuel usage will vary depending on course conditions, operation, turf and fuel quality |
25% load: 3.63 L/hr 0.96 gph 40% load: 5.64 L/hr 1.49 gph 50% load: 6.85 L/hr 1.81 gph |
| Type | Two-year limited |
| Type | ANSI B71.4-2012. |
