Fairway Reel Mowers | 8900A PrecisionCut™ Mower

Fairway Mowers
John Deere
#890a_tc

Disclaimer |

Characteristics

  • The 8900A features a width of 114 to 130 inches depending on cutting unit size, giving more productivity in terms of acres mowed per hour.
  • Another productive advantage of the 8900A is the 8 miles per hour mowing speed.
  • Be productive but carry a light footprint: the 8900A comes in significantly lighter than its main competitor.
  • Versatility is a hallmark: 8900A has 26" and 30" verticutters and large capacity reel motors for scalping during over-seed operations.

Note that this product is available in store only.
Get pre-approved for financing
SKU: 890a_tc Categories: , ,

Description

8900A PrecisionCut Fairway Mower featuring programmable TechControl Display.

Specifications

Maximum rated horsepower At 2800 rpm ISOC: 41.1 kW
55.1 hp
Drive pump Tandem gear pump
Ground pressure 83 kPa
12 psi
Throttle Automatic controls with AutoPedal foot controls; manual control through TechControl display
Operator display TechControl Display: Located on Command Arm; displays machine warnings, on-board electrical diagnostics; service timers on large easy to read screen; quick on the go settings for mow and transport speed; Turn Speed; Loadmatch™ and ON/OFF Cruise Control Use selection: all settings are pass code protected
Mowing speed 0-12.8 km/h
0-8.0 mph
Cutting unit size Quick Adjust QA7: 66 or 76 cm
Quick Adjust QA7: 26 or 30 in.
Total width of cut 289.5 or 330.2 cm
114 or 130 in.
Reel diameter 17.8 cm
7 in.
Frequency of clip (FOC Reels) OR Blade tip speed (decks) 10 Blade: 1.06 mm/km/h
10 Blade: 0.067 in./mph
8 Blade: 1.33 mm/km/h
8 Blade: 0.084 in./mph
Type Direct Inject Turbocharged Diesel
Compliant emission regulation United States and Canada Tier 4
Horsepower Maximum rated horsepower
At 2800 rpm ISOC: 41.1 kW
55.1 hp
Cylinders Four
Displacement 2.091 L
127.6 cu in.
Air cleaner 2-stage dry element
Fuel Diesel up to B20 compliant
Cooling system Liquid centrifugal pump; forward machine location for optimum cooling
Drive pump Tandem gear pump
Cutting units drive Hydraulic motor to each cutting unit
Hydraulic system capacity 37.8 L
10 U.S. gal.
Fuel tank capacity 60.6 L
16 U.S. gal.
Steering Hydraulic power with double acting steering cylinder
Front drive tires 26.5x14-12 turf
Steering tires 20x12X10-8 turf
Ground pressure 83 kPa
12 psi
Brakes Internal hydraulic wet disc brakes with dynamic braking through closed loop hydrostatic system
ROPS Standard; meets ISO 21299 Standard
Cutting units lowered Full fluids; no operator Quick Adjust QA7 (with 66 cm / 26 in.) cutting units lowered: 1239 kg
Full fluids; no operator Quick Adjust QA7 (with 66 cm / 26 in.) cutting units lowered: 2725 lb
Full fluids; no operator Quick Adjust QA7 (with 76 cm / 30 in.) cutting units lowered: 1270 kg
Full fluids; no operator Quick Adjust QA7 (with 76 cm / 30 in.) cutting units lowered: 2795 lb
Throttle Automatic controls with AutoPedal foot controls; manual control through TechControl display
Forward/reverse 2-pedal
Mower lift One-touch single handle
Parking brake Electric Switch on Command Arm for Internal Wet Disk Brakes
Seat Air Ride suspension seat with seat belts and arm rest; fore/aft adjustment; weight and lumbar adjustment
PTO Electric Switch on Command Arm
Ignition Key start
Work lights Standard 3 front work lights
Tilt steering Left Foot operated for easy adjustment
Operator display TechControl Display: Located on Command Arm; displays machine warnings, on-board electrical diagnostics; service timers on large easy to read screen; quick on the go settings for mow and transport speed; Turn Speed; Loadmatch™ and ON/OFF Cruise Control Use selection: all settings are pass code protected
Storage Cup holder; two-way radio located in Command Arm; large operator storage located on left hand side of operator station
Height with ROPS 2200 mm
87 in.
Length 2825 mm
111 in.
Transport width Quick Adjust QA7 (with 66 cm / 26 in.): 2194 mm
Quick Adjust QA7 (with 66 cm / 26 in.): 86.38 in.
Quick Adjust QA7 (with 76 cm / 30 in.): 2385 mm
Quick Adjust QA7 (with 76 cm / 30 in.): 93.90 in.
Mowing position width QA7 (66 cm / 26 in.) 3275 mm
QA7 (66 cm / 26 in.) 129 in.
QA7 (76 cm / 30 in.) 3695 mm
QA7 (76 cm / 30 in.) 145 in.
Wheelbase 1585 mm
62.4 in.
Ground speed Mowing
0-12.8 km/h
0-8.0 mph
Transport
19.2 km/h
12 mph
Reverse
9.6 km/h
6 mph
Number Five
Size Quick Adjust QA7: 66 or 76 cm
Quick Adjust QA7: 26 or 30 in.
Total width of cut 289.5 or 330.2 cm
114 or 130 in.
Height of cut QA7: 6.3-50.8 mm
QA7: 0.25-2.0 in.
Frequency of clip (FOC Reels) OR Blade tip speed (decks) Rollers
Front and rear: 76.2 mm
Front and rear: 3 in.
10 Blade: 1.06 mm/km/h
10 Blade: 0.067 in./mph
8 Blade: 1.33 mm/km/h
8 Blade: 0.084 in./mph
Reel diameter 17.8 cm
7 in.
Bedknife adjustment Reel to bedknife
Backlapping Standard; pressure sensing flow compensating backlap valve; manual reel speed adjustment
Measuring standard ISO 11201
Attachments installed FTCs, reels engaged
Actual Fuel usage will vary depending on course conditions, operation, turf and fuel quality 25% load: 3.63 L/hr
0.96 gph
40% load: 5.64 L/hr
1.49 gph
50% load: 6.85 L/hr
1.81 gph
Type Two-year limited
Type ANSI B71.4-2012.