Description
Three-wheel drive Hybrid mower with a 100-in (254 cm) width of cut and QA7 reels designed for mowing, scalping and verticutting.
Home / Equipment / Golf Equipment / Fairway Mowers /
6700A E-Cut™ Hybrid | Fairway Mowers
Fairway MowersJohn Deere
#6700a_e-cut
Characteristics
- 3-wheel smooth tire configuration for tight turns
- Electric reel drive powered by 240 amp, 56-volt alternator for mowing, scalping and verticutting
- Passcode protected TechControl display
- Reduce fuel consumption, noise, and hydraulic leak points
- Width of Cut – 100" (254 cm) with five 22" (55.9 cm) QA7 reels
- Alternator and Engine LoadMatch™ maintain cut quality in tough conditions
Specifications
| Maximum rated horsepower |
At 3000 rpm: 24.7 hp (18.4 kW) High idle 3200 rpm |
| Drive pump | Axial piston, electronically controlled hydrostatic traction pump; dual gear pumps for steering, lift, mow, and charge |
| Ground pressure |
69 kPa 10 psi |
| Throttle | Hand throttle |
| Operator display | TechControl Display: Located on Command Arm; displays machine warnings, on-board electrical diagnostics; service timers on large easy to read screen; quick on the go settings for mow and transport speed; Turn Speed; Loadmatch™ and ON/OFF Cruise Control Use selection: all settings are pass code protected |
| Mowing speed |
0 to 12.8 km/h 0 to 8.0 mph |
| Cutting unit size |
Quick Adjust QA5: 55.9 cm 22 in. |
| Total width of cut |
254 cm 100 in. |
| Reel diameter |
17.8 cm 7 in. |
| Frequency of clip (FOC Reels) OR Blade tip speed (decks) |
10- Blade: 1.04 mm/km/h 10- Blade: 0.066 in./mph 8-Blade: 1.30 mm/km/h 8-Blade: 0.083 in./mph |
| Type | Indirect Inject Diesel |
| Compliant emission regulation | United States and Canada Final Tier 4, EU Stage V |
| Horsepower |
Maximum rated horsepower At 3000 rpm: 24.7 hp (18.4 kW) High idle 3200 rpm |
| Cylinders | Three |
| Displacement |
1.267 L 77.32 cu in. |
| Air cleaner | 2-stage dry element |
| Fuel | Diesel Up to B20 compliant |
| Cooling system | Liquid centrifugal pump; forward machine location for optimum cooling |
| Drive pump | Axial piston, electronically controlled hydrostatic traction pump; dual gear pumps for steering, lift, mow, and charge |
| Hydraulic system capacity |
37.8 L 10 U.S. gal. |
| Fuel tank capacity |
60.6 L 16 U.S. gal. |
| Steering | Hydraulic power with double acting steering cylinder |
| Front drive tires | 26.5x14-12 smooth |
| Steering tires | 24x13-12 smooth |
| Ground pressure |
69 kPa 10 psi |
| Brakes | Internal hydraulic wet disc brakes with dynamic braking through closed loop hydrostatic system |
| ROPS | Standard; meets ISO 21299 Standard |
| Cutting units lowered |
1181 kg 2598 lb Canopy, FTCs and Power Brushes installed, full fuel |
| Throttle | Hand throttle |
| Forward/reverse |
2-pedal electronic control of eHydro system |
| Mower lift | One-touch single handle |
| Parking brake | Electric Switch on Command Arm for Internal Wet Disk Brakes |
| Seat | Suspension seat with seat belts and arm rest; fore/aft adjustment; weight and lumbar adjustment |
| PTO | Electric Switch on Command Arm |
| Tilt steering | Left Foot operated for easy adjustment |
| Operator display | TechControl Display: Located on Command Arm; displays machine warnings, on-board electrical diagnostics; service timers on large easy to read screen; quick on the go settings for mow and transport speed; Turn Speed; Loadmatch™ and ON/OFF Cruise Control Use selection: all settings are pass code protected |
| Storage | Cup holder; two-way radio; large operator storage located on left hand side of operator station |
| Height with ROPS |
217.3 cm 85.6 in. |
| Length |
307.2 cm 121 in. |
| Transport width |
219 cm 86.2 in. |
| Mowing position width |
287 cm 113 in. |
| Ground speed |
Mowing 0 to 12.8 km/h 0 to 8.0 mph 4WD mow speed N/A Transport 0 to 16.1 km/h 0 to 10.0 mph Reverse 0 to 9.7 km/h 0 to 6.0 mph |
| Number | Five |
| Size |
Quick Adjust QA5: 55.9 cm 22 in. |
| Total width of cut |
254 cm 100 in. |
| Height of cut |
Construction 6.3 to 50.8 mm 0.25 to 2 in. |
| Frequency of clip (FOC Reels) OR Blade tip speed (decks) |
Rollers Front and rear: 76.2 mm 3 in. at 1600 reel speed (engine high idle) - 10- Blade: 1.04 mm/km/h 10- Blade: 0.066 in./mph 8-Blade: 1.30 mm/km/h 8-Blade: 0.083 in./mph |
| Reel diameter |
17.8 cm 7 in. |
| Measuring standard | ISO 11201 |
| Attachments installed | FTCs, reels engaged |
| Type | Two-year limited |
| Type | ANSI B71.4-2012 |
Related products
-
Primary Tillage | 2100 Minimum Till Ripper
EquipmentMore details -
Sprayers | STS 12 Hagie™ Self-Propelled Sprayer
EquipmentMore details -
Primary Tillage | 610 Integral Chisel Plow
EquipmentMore details -
Nutrient Application | 2510H High-Speed Applicator with Dry Nutrient Attachment
EquipmentMore details