Description
The Select Series X300 Tractors from John Deere – maneuverability masters designed for homeowners who mow up to 3.5 acres and have varied terrain and light- to moderate-duty yard tasks.
Home / Equipment / X350R | X300 Select Series Lawn Tractor
CA$8,039.00
The Select Series X300 Tractors from John Deere – maneuverability masters designed for homeowners who mow up to 3.5 acres and have varied terrain and light- to moderate-duty yard tasks.
Engine power |
21.5 hp 16.0 kW |
Oil change | No-tools oil drain with replaceable filter |
Engine manufacturer/model | FR651V |
Transaxle type | K46 hydrostatic integrated with transaxle |
Transaxle control | Twin Touch™ pedals |
Rear tires | 20x10-8 |
Lift system type | Foot pedal with non-adjustable spring assist, optional adjustable spring assist kit available (required for snow blower use) |
Cutting width |
42 in. 107 cm |
U.S. warranty | 4 year/300 hour bumper-to-bumper* (*Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.) |
Power |
21.5 hp 16.0 kW |
Displacement |
44.3 cu in. 726 cc |
Manufacturer/model | FR651V |
Type | Overhead valve, full-pressure lube, oil filter |
Cylinders | V-twin, cast-iron liners |
Governor | Mechanical |
Choke/speed control | Separate levers, automatic choke return |
Cooling method | Air |
Air cleaner | Dry, replaceable |
Oil change | No-tools oil drain with replaceable filter |
Type | Gasoline |
Fuel delivery | Pulse pump, carburetor |
Fuel gauge | Low fuel indicator |
Fuel tank location | Rear |
Fuel fill opening |
On left fender, 3 in. 7.6 cm |
Fuel tank capacity |
2 U.S. gal. 7.6 L |
Battery |
12 V 340 CCA |
Charging system | Flywheel alternator, regulated, 12 amp |
Engine starter | Bendix |
Hour meter | Yes |
Headlights | Two standard, incandescent, 27 W |
Taillights or reflector | No |
Backup lights | No |
Rear work lights | No |
12-V outlet | Optional |
Type | K46 hydrostatic integrated with transaxle |
Control | Twin Touch™ pedals |
Cruise control | Yes, button on dash |
Oil cooler | Fins and fan on transaxle |
Oil filter | Internal, not replaceable |
Differential lock | No |
Forward speed |
0-5.3 mph 0-8.5 km/h |
Reverse speed |
0-4 mph 0-6.4 km/h |
Brakes | Internal wet disc |
Frame | Welded heavy-duty |
Primer/paint | E-coat/powder |
Weight bracket | Optional front |
Receiver hitch | No |
Front axle | Cast iron front axle, front wheel ball bearings |
Spindle bushings | No |
Front tires | 15x6-6 |
Rear tires | 20x10-8 |
Hood material | Fully enclosed, molded-in color material reduces sound, will not rust or dent |
Fender deck material | Stamped steel |
Floor mats | Sure-grip rubber |
Storage | Yes, under seat and covered toolbox |
Service interval decal | Yes |
Fender handles/grips | No |
Cup holder | Yes |
Equipment mounting | Yes, front |
Maximum towing capacity |
600 lb 272 kg |
Type | Manual, sector and pinion |
Four-wheel steer | Not available on this model |
Steering wheel |
Large, 14 in. 35.6 cm |
Tilt steering wheel | No |
Turning radius |
16.5 in. 42 cm |
Uncut circle radius |
Right, 23 in. 58.4 cm Left 28 in. 71.1 cm |
Type | Open-back design with grasp |
Seat back height |
15 in. 38 cm |
Armrests | No |
Fore-aft adjustment |
While seated, ball bearing slide rail, 15-position, 6.6 in. 17 cm |
Seat suspension | Tilt, two coil springs, three-position no-tools adjustment for operator weight |
Type | Foot pedal with non-adjustable spring assist, optional adjustable spring assist kit available (required for snow blower use) |
Hydraulic outlets | No |
Mower cut height |
13 positions, 1-4 in. 2.5-9.5 cm |
Cut height increments |
0.25 in. 0.64 cm |
Preset cut height | Yes |
Type | Rear discharge, rear collect, mulch |
Cutting width |
42 in. 107 cm |
Construction | Stamped steel deck shell |
Mower deck material |
11 gauge 0.120 in. 3 mm |
Mower wash port | Yes |
Mower drive system | Electric power take-off (PTO) clutch, in-line belt |
Mower wheels | Three |
Mower wheel adjustment | Four-position, tool required |
Mower level adjustment | Exact Adjust ports and onboard deck-leveling gauge |
Type | Slide under tractor |
Front draft arms | Attached with spring pins at two points |
Rear draft arms | Two pins and spring clips |
Mower wheels rotate | No |
Drive system | Dual belt |
Meets ANSI standard | Yes |
Meets OPEI standard | Yes |
Backup protection | Reverse Implement Option (RIO) |
Safety video | Yes |
Notes |
Includes rear hopper and mulch plug, optional rear deflector available Fully enclosed, molded-in color material reduces sound, will not rust or dent Durable E-coat primer and powder-paint finish |
Warranty | 4 year/300 hour bumper-to-bumper* (*Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.) |
Mowers |
Rear discharge, rear collect (standard), 42 in. 107 cm |
Rear bagger |
Rear hopper, 8.5 bu 300 L |
Mulching system | Standard mulch plug |
Front thatcher |
38, 46, 54 in. 96.5, 116.8, 137.2 cm |
Front blade |
44 in. 111.8 cm |
Snow blower |
Two-stage, 44 in. 111.8 cm |
Sprayer |
Tow-behind, 15 U.S. gal. 56.8 L Tow-behind, 25 U.S. gal. 94.6 L |
Spreader |
Tow-behind, 125 lb 57.7 kg Tow-behind, 175 lb 79.4 kg |
Front bumper | Styled bumper option |
Brush guard | Yes |
Grass striping | Lawn striping kit |
Tractor shovel |
40 in. 101.6 cm |
Tow-behind tools | 16 |
Height |
46.1 in. 1171 mm |
Overall length |
97.2 in. 2468 mm |
Wheelbase |
50.2 in. 1275 mm |
Width with mower |
43.8 in. 1112 mm |
Width without mower |
37.9 in. 962 mm |
Weight |
Mower, no fuel: 646 lb 293 kg |
Manufacturing location | Horicon, Wisconsin, USA |
Date collected | 3-Oct-22 |