Rough Mowers | 8800A TerrainCut™

Rough Trim and Surround Mowers
John Deere
#880avtc

Disclaimer |

Characteristics

  • TechControl™ Display locks in performance, and uptime
  • LoadMatch™ to maintain cut quality
  • 27% more hp, 20 percent more torque in the mowing circuit
  • Final Tier 4 without sacrificing horsepower

Note that this product is available in store only.
Get pre-approved for financing

Description

8800A TerrainCut Rough Mower, featuring programmable TechControl Display. Build your own today.

Specifications

Maximum rated horsepower At 2800 rpm ISOC: 41.1 kW
55.1 hp
Drive pump Tandem gear pump
Ground pressure 82.7-124 kPa
12-18 psi
Throttle Automatic controls with AutoPedal foot controls; manual control through TechControl display
Operator display TechControl Display: Located on Command Arm; displays machine warnings, on-board electrical diagnostics; service timers on large easy to read screen; quick on the go settings for mow and transport speed; Turn Speed; Loadmatch™ and ON/OFF Cruise Control Use selection: all settings are pass code protected
Mowing speed 0-12.8 km/h
0-8 mph
Total width of cut 53.3 cm
21 in.
Frequency of clip (FOC Reels) OR Blade tip speed (decks) 4572 m/min
15,000 fpm
Type Direct Inject Turbocharged Diesel
Compliant emission regulation United States and Canada Tier 4
Horsepower Maximum rated horsepower
At 2800 rpm ISOC: 41.1 kW
55.1 hp
Cylinders Four
Displacement 2.091 L
127.6 cu in.
Air cleaner 2-stage dry element
Fuel Diesel up to B20 compliant
Cooling system Liquid centrifugal pump; forward machine location for optimum cooling
Drive pump Tandem gear pump
Cutting units drive Direct-coupled hydraulic gear motor
Hydraulic system capacity 45.4 L
12 U.S. gal.
Fuel tank capacity 61.7 L
16 U.S. gal.
Steering Hydraulic power with dual rod, double acting steering cylinder
Front drive tires 26x12-12 Multi Trac
Steering tires 20x12X10-8 turf
Ground pressure 82.7-124 kPa
12-18 psi
Brakes Electric Switch on Command Arm for Internal Wet Disk Brakes
ROPS Standard, meets ISO 21299 standards
Throttle Automatic controls with AutoPedal foot controls; manual control through TechControl display
Forward/reverse 2-pedal
Mower lift One-touch single handle
Parking brake Electric Switch on Command Arm for Internal Wet Disk Brakes
Seat Suspension seat with seat belts and arm rest; fore/aft adjustment; weight and lumbar adjustment
PTO Electric Switch on Command Arm
Tilt steering Left Foot operated for easy adjustment
Operator display TechControl Display: Located on Command Arm; displays machine warnings, on-board electrical diagnostics; service timers on large easy to read screen; quick on the go settings for mow and transport speed; Turn Speed; Loadmatch™ and ON/OFF Cruise Control Use selection: all settings are pass code protected
Storage Cup holder; two-way radio; large operator storage located on left hand side of operator station
Height with ROPS 2.24 m
88 in.
Length 3.38 m
133 in.
Transport width 2.21 m
87 in.
Mowing position width 2.23 m
88 in.
Ground speed Mowing
0-12.8 km/h
0-8 mph
Transport
0-20.12 km/h
0-12.5 mph
Reverse
9.6 km/h
6 mph
Total width of cut 53.3 cm
21 in.
Height of cut Construction
10 gauge
3.4 mm
0.1345 in.
Steel with front skid plate
No tool adjustment: 2.54-10.2 cm
1-4 in.
Frequency of clip (FOC Reels) OR Blade tip speed (decks) Rollers
Rear: 7.6 cm
Rear: 3 in.
Front: Two: diameter: 10.2 cm
Front: Two: diameter: 4 in.
Wide: 12.7 mm
Wide: 5 in.
4572 m/min
15,000 fpm
Operator ear full engine 91 dBA
Measuring standard ISO 11201
Actual Fuel usage will vary depending on course conditions, operation, turf and fuel quality 25% load: 3.63 L/hr
0.96 gph
40% load: 5.64 L/hr
1.49 gph
50% load: 6.85 L/hr
1.81 gph
Type Two-year limited
Type ANSI B71.4-2012.