Description
9009A TerrainCut Rough Mower, featuring programmable TechControl Display. Build your own today.
Home / Equipment / Golf Equipment / Rough Trim and Surround Mowers /
Rough Mowers | 9009a TerrainCut™
Rough Trim and Surround MowersJohn Deere
#9009atc
Characteristics
- Five, 27-in. independent rotary decks with a 9-foot cutting width
- Deep shell deck design with exclusive rear discharge chute
- Tool notch system
- LoadMatch™ for excellent climbing and cut quality
Specifications
| Maximum rated horsepower |
At 2800 rpm ISOC: 41.1 kW At 2800 rpm ISOC: 55.1 hp |
| Drive pump | Tandem gear pump |
| Ground pressure |
82.7 - 124 kPa 12 - 18 psi |
| Throttle | No throttle lever; Automatic controls with AutoPedal foot controls; manual control through TechControl display |
| Operator display | TechControl Display: Located on Command Arm; displays machine warnings, on-board electrical diagnostics; service timers on large easy to read screen; quick on the go settings for mow and transport speed; Turn Speed; LoadMatch™ and ON/OFF Weight Transfer and Cruise Control Use selection:; Cutting unit drop rate adjustment; ALL settings are pass code protected |
| Mowing speed |
0 - 12.8 km/h 0 - 8 mph |
| Cutting unit size |
68.58 cm 27 in. |
| Total width of cut |
2.74 m; 17.15 cm overlap between front and rear decks 9 Feet; 108 in.; 6.75 in. overlap between front and rear decks |
| Frequency of clip (FOC Reels) OR Blade tip speed (decks) |
409 m 16,097 fpm |
| Type | Direct Inject Turbocharged Diesel B20 compliant |
| Compliant emission regulation | United States/Canada Final Tier 4 |
| Horsepower |
Maximum rated horsepower At 2800 rpm ISOC: 41.1 kW At 2800 rpm ISOC: 55.1 hp |
| Cylinders | Four |
| Displacement |
2.091 L 127.6 cu in. |
| Air cleaner | 2-stage dry element |
| Fuel | Diesel up to B20 compliant |
| Cooling system | Liquid centrifugal pump; forward machine location for optimum cooling |
| Traction drive | eHydro™ servo controlled hydraulic traction pump provides flow to All-wheel-drive GRIP system; GRIP traction provides hydraulic flow between front and opposite rear wheel for increased traction to reduce 'high side tire slippage |
| Drive pump | Tandem gear pump |
| Cutting units drive | Direct-coupled hydraulic gear motor |
| Hydraulic system capacity |
45.4 L 12 U.S. gal. |
| Fuel tank capacity |
60.6 L 16 U.S. gal. |
| Steering | Hydraulic power with dual rod, double acting steering cylinder |
| Front drive tires | 26.5x14-12 6PR Ultra Trac |
| Steering tires | 20x12-10 4PR Turf |
| Ground pressure |
82.7 - 124 kPa 12 - 18 psi |
| Brakes | Internal hydraulic wet disc brakes with dynamic braking through closed loop hydrostatic system |
| ROPS | Standard, meets ISO 21299 standards |
| Cutting units lowered |
1814.37 kg with decks up 4000 lb. with decks up |
| Throttle | No throttle lever; Automatic controls with AutoPedal foot controls; manual control through TechControl display |
| Forward/reverse | 2-pedal |
| Mower lift | One-touch single handle |
| Parking brake | Electric Switch on Command Arm for Internal Wet Disk Brakes |
| Seat | Air Ride Suspension seat with seat belts and arm rest; fore/aft adjustment; weight and lumbar adjustment |
| PTO | Electric Switch on Command Arm for quick and easy transition from mow to transport |
| Ignition | Key Switch on Command Arm |
| Work lights | 3 standard work lights in front |
| Tilt steering | Left Foot operated for easy adjustment |
| Operator display | TechControl Display: Located on Command Arm; displays machine warnings, on-board electrical diagnostics; service timers on large easy to read screen; quick on the go settings for mow and transport speed; Turn Speed; LoadMatch™ and ON/OFF Weight Transfer and Cruise Control Use selection:; Cutting unit drop rate adjustment; ALL settings are pass code protected |
| Storage | Operator storage located on left side for easy access from operator seat |
| Height with ROPS |
2220 mm 87.4 in. |
| Length |
3393 mm 134 in. |
| Transport width |
2287 mm @ 101.60 mm height of cut 90 in @ 4 in height of cut |
| Mowing position width |
2.74 m; 17.15 cm overlap between front and rear decks 9 Feet; 108 in; 6.75 in. overlap between front and rear decks |
| Wheelbase |
1750 mm 68.9 in. |
| Ground speed |
Mowing 0 - 12.8 km/h 0 - 8 mph Transport 0 - 20.12 km/h 0 - 12.5 mph Reverse 0 - 6.4 km/h 0 - 5 mph |
| Number | 5 |
| Size |
68.58 cm 27 in. |
| Total width of cut |
2.74 m; 17.15 cm overlap between front and rear decks 9 Feet; 108 in.; 6.75 in. overlap between front and rear decks |
| Height of cut |
Construction single sheet 10-gauge steel stamped deck with front skid plate 1.5 inch (38mm) tall and ½ inch (12.7mm) thick steel stock welded to the decks edge 1.91 to 10.2 cm; no tool adjustment .75 - 4 in; no tool adjustment |
| Frequency of clip (FOC Reels) OR Blade tip speed (decks) |
Rollers Rear: 7.62 cm Rear: 3 in. Front: 12.70 cm Front: 5 in. 409 m 16,097 fpm |
| Operator ear full engine | 90 dBA |
| Measuring standard | ISO 11201 |
| Actual Fuel usage will vary depending on course conditions, operation, turf and fuel quality |
25% load 3.63 Liters per hour (.96 GPH) 40% Load 5.64 Liters per hour (1.49 GPH) 50% Load 6.85 liters per hour (1.81 GPH ) |
| Type | Two-year limited |
| Type | ANSI B71.4-2012.; CE |
