Description
Meet the most capable sub-compact tractors on the market: the John Deere 1 Family. 1023E Sub-Compact Tractor.
Save 10%* on your Christmas gifts with the promo code PROMO10!
Click hereHome / Equipment / Tractors / Compact Tractors / 1 Series Compact Tractors / Sub-Compact Tractors | 1023E Tractor
Take advantage of a financing offer at 0%1 for 84 months or get $1,350* cash discount
For pricing and additional discounts, see your local John Deere Dealer.
Meet the most capable sub-compact tractors on the market: the John Deere 1 Family. 1023E Sub-Compact Tractor.
| Engine power (gross) |
SAE J1995 rated power: 16 kW 21.5 hp 21.8 PS at 3200 rpm |
| Power take-off (PTO) power |
12.1 kW 16.2 hp |
| Steering hydraulics |
13.2 L/min 3.5 gpm |
| Implement hydraulics |
13.2 L/min 3.5 gpm |
| Hitch type | Limited Category 1 |
| Lift capacity, 24-in. behind link arms |
344 kg 758 lb |
| Standard transmission; forward/reverse | Hydrostatic - two range |
| Cruise control | No |
| Approximate shipping weight (open-station; cab) |
Open station: 656 kg 1446 lb Cab: Not applicable |
| Wheelbase |
1450 mm 57.1 in. |
| Manufacturer | Yanmar® |
| Engine model | 3TNM74F-NCJT |
| Engine power (gross) |
SAE J1995 rated power: 16 kW 21.5 hp 21.8 PS at 3200 rpm |
| Power take-off (PTO) power |
12.1 kW 16.2 hp |
| Rated engine speed | 3200 rpm |
| Type | Diesel |
| Injection pump type | Indirect injection |
| Aspiration | Natural |
| Emissions compliance | Final Tier 4 |
| Cylinders/displacement |
Three cylinders: 0.993 L 60.6 cu in. |
| Number of cylinders | Three |
| Cylinder liners | Cast-in-block |
| Bore and stroke |
74 x 77 mm 2.91 x 3.03 in. |
| Compression ratio | 23.5:1 |
| Lubrication | Pressurized |
| Cooling system | Water pump |
| Air cleaner | Dual element |
| Engine torque at rated speed |
47.7 Nm 35.2 lb-ft |
| Fuel tank capacity |
24 L 6.3 U.S. gal. |
| Battery size | 500 CCA |
| Alternator (12-V) | 40 amp |
| Starter size |
1.2 kW 1.6 hp |
| Type | Indirect injection |
| Standard transmission; forward/reverse | Hydrostatic - two range |
| Left-hand reverser | No |
| Final drive | Spur gear |
| Brakes | Wet disc (left-hand pedal) |
| Steering | Power |
| Axle capacity |
Front 612 kg 1349 lb Rear 715 kg 1576 lb |
| Creeper | No |
| Cruise control | No |
| Differential lock | Yes |
| Type | Open center |
| Pump rated output |
Steering 13.2 L/min 3.5 gpm Implement 13.2 L/min 3.5 gpm 24 L/min 6.3 gpm |
| Pump type | Single gear |
| Maximum operating pressure |
138 bar 2000 psi |
| Draft control sensing | Select control |
| Remote control valves available | Three |
| Type | Limited Category 1 |
| Lift capacity, 24-in. behind link arms |
344 kg 758 lb |
| Standard |
Rear: 540 rpm Mid: 2100 rpm |
| Control | Independent |
| Clutch | Wet disk |
| Brake (for mid and rear PTO) | Wet disk |
| Crankcase with filter |
2.7 L 2.9 gal. |
| Transmission and hydraulic system |
12.3 L 3.2 gal. |
| Type | Spur gear |
| Differential lock | Yes |
| Rollover protective structure |
Type Foldable Yes |
| Platform - flat/straddle | One-piece semi flat |
| Gear shift location - console/floor | Left-hand side |
| Wheelbase |
1450 mm 57.1 in. |
| Front axle clearance |
195 mm 7.7 in. |
| Turning radius without brakes |
Outside front tire: 2.51 m 8.2 ft |
| Limited slip differential | No |
| Approximate shipping weight (open-station; cab) |
Open station: 656 kg 1446 lb Cab: Not applicable |
| Front |
R3 Turf: 18x8.50-10 R4: 18x8.5-10 |
| Rear |
R3 Turf: 26x12-12 R4: 26x12-12 |
| Front tread range |
931 mm 36.7 in. |
| Rear tread spacing |
895 mm 35.2 in. |
| Toolbox | Yes |