Description
The 2038R is built on a larger, heavier frame.
Home / Equipment / Tractors / Compact Tractors / 2 Series Compact Tractors /
Compact Tractors | 2038R
2 Series Compact TractorsJohn Deere
#2038rlv
Characteristics
- Standard LED headlights and fender lights
- Comfortable, marine-grade seat stays in top condition
- Larger, heavier frame for added stability
- Up to 1.83 meters (72") AutoConnect™ mid-mower deck can be installed or removed in under 5 minutes
For pricing and additional discounts, see your local John Deere Dealer.
Specifications
| Engine power (gross) |
SAE J1995 rated power: 27.4 kW 36.7 hp 37.2 PS at 2500 rpm |
| Power take-off (PTO) power |
22.7 kW 30.4 hp |
| Steering hydraulics |
15 L/min 4 gpm |
| Implement hydraulics |
20.2 L/min 5.3 gpm |
| Hitch type | Category 1 |
| Lift capacity, 24-in. behind link arms |
615 kg 1356 lb |
| Standard transmission; forward/reverse | Hydrostatic transmission (HST) |
| Cruise control | Standard |
| Approximate shipping weight (open-station; cab) |
Open station: 1320 kg 2910 lb Cab: Not applicable |
| Wheelbase |
1723 mm 67.8 in. |
| Manufacturer | Yanmar® |
| Engine model | 3TNV88C-NJT |
| Engine power (gross) |
SAE J1995 rated power: 27.4 kW 36.7 hp 37.2 PS at 2500 rpm |
| Power take-off (PTO) power |
22.7 kW 30.4 hp |
| Rated engine speed | 2500 rpm |
| Type | Direct Injection |
| Injection pump type | Direct Injection |
| Aspiration | Turbocharged |
| Emissions compliance | Final Tier 4 |
| Cylinders/displacement |
Three cylinders: 1.568 L 95.8 cu in. |
| Number of cylinders | Three |
| Cylinder liners | Cast-in-block |
| Bore and stroke |
86x90 mm 3.39x3.54 in. |
| Compression ratio | 19.1:1 |
| Lubrication | Pressurized |
| Cooling system | Water pump |
| Air cleaner | Dual element |
| Engine torque at rated speed |
104.7 Nm 77.2 lb-ft |
| Fuel tank capacity |
32 L 8.5 U.S. gal. |
| Battery size | 500 CCA |
| Alternator (12-V) | 85 amp |
| Starter size |
1.4 kW 1.9 hp |
| Type | Direct Injection |
| Standard transmission; forward/reverse | Hydrostatic transmission (HST) |
| Final drive | Spur gear |
| Brakes | Wet disc |
| Steering | Power steering |
| Axle capacity |
Front 880 kg 1940 lb Rear 1800 kg 3968 lb |
| Creeper | No |
| Cruise control | Standard |
| Differential lock | Yes |
| Type | Open center |
| Pump rated output |
Steering 15 L/min 4 gpm Implement 20.2 L/min 5.3 gpm 35.2 L/min 9.3 gpm |
| Pump type | Dual gear |
| Maximum operating pressure |
172 bar 2495 psi |
| Draft control sensing | Position control |
| Remote control valves available | Up to three |
| Type | Category 1 |
| Lift capacity, 24-in. behind link arms |
615 kg 1356 lb |
| Standard |
Rear: 543 rpm Mid: 1998 rpm |
| Control | Independent |
| Clutch | Wet disc |
| Brake (for mid and rear PTO) | Wet disc |
| Crankcase with filter |
4.5 L 4.8 gal. |
| Type | Spur Gear |
| Differential lock | Yes |
| Rollover protective structure |
Type Foldable ASABE S478 |
| Platform - flat/straddle | Semi-flat |
| Wheelbase |
1723 mm 67.8 in. |
| Turning radius with brakes |
2.46 m 8.07 ft |
| Approximate shipping weight (open-station; cab) |
Open station: 1320 kg 2910 lb Cab: Not applicable |
| Front |
R1 Ag 7.00-12 R3 Turf 23x8.50-14 R4 Industrial 23x8.50-14 R3 Turf Radial 200/60 R15 |
| Rear |
R1 Ag 12.4-16 R3 Turf 14-17.5 R4 Industrial 14-17.5 R3 Turf Radial 300/70 R20 |
| Toolbox | Yes |
| Tilt steering wheel | Yes |
| 12-V Outlet | Yes |
