Mower-Conditioners | S350 Mower-Conditioner

Equipment
John Deere
#s350_e

Disclaimer |

Characteristics

  • Reduce service time with Quick Change Knives
  • Updated design and styling
  • Impeller, urethane or V-10 conditioners
  • Gear-driven cutting platform
  • Adjustable gauge shoes

Note that this product is available in store only.
Get pre-approved for financing
SKU: s350_e Categories: , ,

Description

The S350 Mower-Conditioner delivers a fast, clean cut, field after field, season after season.

Specifications

PTO speed 1000 rpm
1000 rpm 1-3/8 in. PTO 90-150 hp
68-112 kW
Standard hitch Clevis
Optional hitch Equal angle, Rockshaft swivel or Drawbar swivel
Hydraulic pressure required 13,790 kPa
2,000 psi
Cutterbar - cutting width 3.5 m
11.5 ft
Number of disks/knifes 7
14
Transport width 3.5 m
11.5 ft
Tractor connection 21 spline
Standard hitch Clevis
Optional hitch Equal angle, Rockshaft swivel or Drawbar swivel
Hydraulic pressure required 13,790 kPa
2,000 psi
Type John Deere
Cutting width 3.5 m
11.5 ft
Cutting height 2.8-9.8 cm
1.1-3.8 in.
Number of disks 7
Number of knives 14
Disk speed 2,650 rpm
Knife tip speed 307 km/h
191 mph
Disk drive Gear
Lubrication Hy-Gard oil
Oil reservoir capacity 8 L
8.5 U.S. qt
Cutterbar oil check Combination check, drain plug
Angle adjustment Manual or hydraulic
Angle range 2-8 degree (angle)
Cutterbar protection ShearHub
Adjustable gauge shoes Yes
Width 236 cm
92.7 in.
Diameter 25.4 cm
10 in.
Tines type V-tines
Number of tines 57
Number of speeds Two
Drive 3-V powerband belt and sheaves
Width 236 cm
92.7 in.
Diameter 25.4 cm
10 in.
Type of material Urethane or Steel
Design Urethane: Recessed cleat, Steel: Intermeshing flutes V-10
Speed 664 rpm
Transport width 3.5 m
11.5 ft
Transport length 6.2 m
20.6 ft
Weight, impeller conditioner 2,233 kg
4,923 lb
With Urethane roll conditioner: 2,388 kg
5,264 lb
With Steel roll conditioner: 2,450 kg
5,400 lb
With Impeller roll conditioner: 2,233 kg
Standard tires 11L-15 standard, 31x13.5L 15 optional
31x13.5L 15 optional
Date collected August 24, 2020