Mower-Conditioners | C500 Mower-Conditioner

Equipment
John Deere
#c500_e

Disclaimer |

Characteristics

  • 16 ft (5 m) cutting width
  • Reduce service time with Quick Change Knives
  • Easier serviceability with modular-design cutterbar
  • Improve windrow formation and reduce ash content with overshot cross auger
  • Urethane, V-10 conditioners or Tri-Lobe conditioners

Note that this product is available in store only.
Get pre-approved for financing
SKU: c500_e Categories: , ,

Description

The C500 Mower-Conditioner delivers a fast, clean cut, field after field, season after season.

Specifications

PTO speed 1000 rpm
1000 rpm 1-3/8 in. PTO 120-210 hp
89-157 kW
Standard hitch Rockshaft swivel
Optional hitch Drawbar swivel
Hydraulic pressure required 17,237 kPa
2,500 psi
Cutterbar - cutting width 4.9 m
16 ft
Number of disks/knifes 10
20
Transport width 5.03 m
16.5 ft
Tractor connection 21 spline
Standard hitch Rockshaft swivel
Optional hitch Drawbar swivel
Hydraulic pressure required 17,237 kPa
2,500 psi
Type John Deere
Cutting width 4.9 m
16 ft
Cutting height 1.6-11.7 cm
0.63-6.7 in.
Number of disks 10
Number of knives 20
Disk speed 2,650 rpm
Knife tip speed 307 km/h
191 mph
Disk drive Gear
Lubrication Hy-Gard oil
Oil reservoir capacity 11.4 L
12 U.S. qt
Cutterbar oil check Combination sight glass, drain plug
Angle adjustment Manual or hydraulic
Angle range 2-8 degree (angle)
Cutterbar protection ShearHub
Adjustable gauge shoes Yes
Width 269 cm
105.5 in.
Diameter 25.3 cm
9.96 in.
Type of material Urethane or Steel
Design Urethane: Recessed cleat, Steel Intermeshing flutes (V-10 and Tri-Lobe)
Speed 1000 rpm
Drive Telescoping shaft
Transport width 5.03 m
16.5 ft
Transport length 9.9 m
32.5 ft
Weight, roll conditioner With Urethane roll conditioner: 4,010 kg
8,840 lb
With V-10 steel roll conditioner: 4,091 kg
9,020 lb
With Tri-Lobe roll conditioner: 4,148 kg
9,145 lb
Standard tires 31x13.5 15 8PR
Date collected August 24, 2020