Home / Equipment / Seeding Equipment | 730 Air Disk Drill

Seeding Equipment | 730 Air Disk Drill

Seeding Equipment | 730 Air Disk Drill

Equipment
John Deere
#0730ln

Disclaimer |

Characteristics

  • See the flow of seed & fertilizer from the cab with RelativeFlow™ blockage monitoring
  • Double-disk openers offer precise depth
  • Three tool widths and two seed row spacings
  • Field Doc™ and Map-Based Prescriptions

Note that this product is available in store only.
Get pre-approved for financing
SKU: 0730ln Categories: ,

Description

730 Air Disk Drill Air Seeding from John Deere. Learn more about the features, specifications, and more for the 730 Air Disk Drill Air Seeding.

Specifications

Working widths 28 ft
8.7 m
Number of ranks 4 ranks of c-shanks,1 rank seed openers
Number of sections 3
Opener - Type Double disk
Underframe clearance 24 in.
60.9 cm
Mainframe - Centerframe width 11-ft. 8-in.
3.56 m
Mainframe - Wing flexibility 11 degrees up, 9 degrees down
Harrow - Type Tine tooth
Harrow - Attachment Rolling Basket with 1-bar harrow
Seeding tool depth control - Range 1/4 inch increments
Working widths 8.53 m
28 ft
Number of ranks 4 ranks of c-shanks,1 rank seed openers
Number of sections 3
Type Double disk
Penetration force Patented Active Hydraulic
Boot aluminum
Quantity 46 on 7.5-in. spacing
56 on 6-in. spacing
Size 13.5-in. (343 mm) with 0.25-in. (6 mm) offset
Spacing 6-in. (15.2 cm) or
7.5-in. (19.1 cm)
Down pressure Opener down pressure: 105 lb./opener
Press wheel down pressure: 65 lb. at 1500 psi
Type 3-section drawn flexible
Size 28 ft
8.7 m
Centerframe width 3.56 m
11-ft. 8-in.
Cross tubes 4x4-in. (102x102 mm)
End tubes 2x5-in. (50x127 mm)
Hitch (tubular steel) 6x10-in. (76x152 mm)
Rockshaft 5.5 x 0.312-in.
140 x 7.92 mm
Folding over-center
Wing flexibility 11 degrees up, 9 degrees down
Fore-and-aft 134 in.
3.51 m
Underframe clearance 24.1 in.
60.9 cm
Between ranks range 29 to 41-in. (73.7 to 104 cm)
Hydraulics active hydraulic downpressure
Type Tine tooth
Attachment Rolling Basket with 1-bar harrow
Type Tru-Position
Quantity 37
Size 3/4 x 1-3/4 x 24-in.
19 x 44 x 610 mm
Spacing 9 in.
22.8 cm
Trip clearance 10 in.
25.4 cm
Trip force 200 lb
890 N
Arc 47 degree
Finishing tool double bar harrow or rolling basket with single bar harrow
Type On individual openers
Range 1/4 inch increments
Wing; standard (4) 9.5Lx15 Load Range D walk-over tandems
Gauge wheels, wing 2-7.60x15 8PR
Centerframe; standard (4) 11Lx15 Load Range D walk-over tandems
Castering stabilizer (2) 7.60x15 8 PR
Height Maximum height: 12-ft. 9.3-in (3.90 m)
Minimum height: 11-ft. 4.3-in (3.46 m)
Width 16-ft. 3.6-in. (4.97 m)
Transport clearance With sweep extenders: 16.26-in. (413 mm)
Without sweep extenders: 17.26-in. (438 mm)
Minimum SCVs 2 SCVs
Standard Yes
Shipping location Des Moines, IA

Related products