Seeding Equipment | H540F Air Hoe Drill

Equipment
John Deere
#h540fh

Disclaimer |

Characteristics

  • See the flow of seed & fertilizer from the cab with RelativeFlow™ blockage monitoring
  • Quick Change Blade enhancement of the ProSeries™ Opener reduces change time by 45%1
  • Choice of ground-engaging openers
  • AutoTrac™ compatibility

Note that this product is available in store only.
Get pre-approved for financing
SKU: h540fh Categories: ,

Description

H540F Air Hoe Drill Air Seeding from John Deere. Learn more about features, specifications, and more for the H540F Air Hoe Drill Air Seeding.

Specifications

Spacing and width #1 Spacing: 25.4 cm
10 in.
Width: 12.2 m
40 ft
Road clearance with sweep 381 mm
15 in.
Transport width 6.1 m
20 ft
Nominal mainframe width (between wing-fold pivots) 4.2 m
13.75 ft
Number of seed openers Openers link
Spacing and width #1 Working width
12.2 m
40 ft
Transport height with harrow
5.79 m
19.01 ft
Minimum temporary height reduction with sweeps
508 mm
20 in.
Weight
Weight with typical options: 13,150 kg
29,000 lb
Spacing: 25.4 cm
10 in.
Width: 12.2 m
40 ft
Type #1 Spacing
254 mm
10 in.
Dimensions
31.75 x 50.8 x 711 mm
1.25 x 2 x 28 in.
Trip force
2.4 kN
540 lbf
TruPosition™: 51 degree (angle)
Underframe clearance 71.12 cm
28 in.
Type #1 Spacing
508 mm
20 in.
Blade size
457 mm
18 in.
Fertilizer compatibility
Anhydrous gas, liquid, dry
Rolling disk
Centerframe width 4.2 m
13.75 ft
Cross members 10.2 x 10.2 cm
4 x 4 in.
End tubes 102 x 102 x 9.5 mm
4 x 4 x 0.375 in.
Hitch 102 x 102 x 9.5 mm
4 x 4 x 0.375 in.
Hitch category Category 4: Pin: 50 mm
2 in.
Category 5: 70 mm
2.75 in.
Seeding tool depth control Adjustable mechanical stop
Mainframe and wing flexibility Diagonal flex
Length Hitch pin to rear of transport wheels
10.12 m
33.2 ft
Lateral frame clearance, opener to opener
76.2 cm
30 in.
Fore-aft frame clearance between ranks
73.66 cm
29 in.
Front of front cross member to front of rear cross member (4 ranks)
2.21 m
7.23 ft
Size Steel
3x21 (34.7 lb) or 4x22 (35.9 lb) on 25.4-cm (10-in.) spacing
Semi-pneumatic
3x21 (37.2 lb), 4x21 (41.8 lb), or 5.5x21 (51.6 lb) on 25.4-cm (10-in.) spacing
Tire specifications Tire link
Minimum SCVs Three
Tractor hydraulic circuit requirements One selective control for frame lift, one selective control for wing fold and transport wheels, and one for SFP rockshaft control
Tractor hydraulic pressure requirement 172.4 bar/min
2500 psi/min
40-ft. 242.4 kW
325 hp
50-ft. 298.3 kW
400 hp
60-ft. 354.2 kW
475 hp
Standard Yes
F.O.B. Valley City, North Dakota