Home / Equipment / Agriculture / Tillage tools / Tillage Equipment / MT7 | Tillage

MT7 | Tillage

MT7 | Tillage

Tillage Equipment
John Deere
#394axh

Disclaimer |

Characteristics

  • 7 standards
  • Two stabilizer wheels
  • Integral or drawn options*
  • Extended wear standards deliver twice the life expectancy*

Note that this product is available in store only.
Get pre-approved for financing
SKU: 394axh Categories: , , ,

Description

The MT7 is John Deere’s improved inline ripping tool series, designed to deliver a highly productive, easy-to-set, minimal maintenance solution to breaking up top soil compaction.

Specifications

Working width 2-bar 1.9-3.43 m
6.25-11.25 ft
Working width 3-bar 3.43-6.48 m
11.25-21.25 ft
Transport width 5.0 m
16.5 ft
Transport height 1.35-3.4 m
4.42-11 ft
Operating depth Maximum
40.6 cm
16 in.
Miles per hour 6.4-11.2 km/h
4-7 mph
Horsepower per shank 8.95-14.9 kW
12-20 hp
Standard spacings Inches
38.1 cm
15 in.
Working width 5.3 m
17.5 ft
Horsepower per standard 29.8-44.7 kW
40-60 hp
Spacing between standards 76.2 cm
30 in.
Type Rigid: 3-section
Option 1 1.35 m
4.42 ft
Option 2 1.35 m
4.42 ft
Option 3 1.35 m
4.42 ft
Option 4 1.3 m
4.33 ft
Option 5 1.3 m
4.33 ft
Option 6 1.3 m
4.33 ft
Option 7 3.2 m
10.33 ft
Option 8 3.4 m
11 ft
Option 1 Rigid: 5-shank
Option 2 Rigid: 7-shank
Option 3 Rigid: 9-shank
Option 4 Rigid: 9-shank
Option 5 Rigid: 11-shank
Option 6 Rigid: 13-shank
Option 7 Folding: 15-shank
Option 8 Folding: 17-shank
Inches 27.9 cm
11 in.
Maximum 40.6 cm
16 in.
Miles per hour 6.4-11.2 km/h
4-7 mph
Horsepower per shank 8.95-14.9 kW
12-20 hp
Horsepower per standard 29.8-44.7 kW
40-60 hp
Options Single point on 3-bar machines
Option 1 3-point hitch for integral
Option 2 TruSet™ in-cab controls and single-point crank-adjust (on drawn models only)
Type Turnbuckle leveling adjustment: Tube: 51x127 mm
2x5 in.
Options Integral
Optional: Drawn
Three-point hitch requirements Category 3/4 (with Quik-Coupler)
Pull-type description Category 4 Hitch
Description Rigid frame: cross members: 102x102 mm
4x4 in.
Side members: 51x102 mm
2x4 in.
Diagonal frame supports: 76x127 mm
3x5 in.
Underframe clearance 81.3 cm
32 in.
Size 102x152x0.9.5 mm
4x6x0.375 in.
Maximum underframe clearance 89 cm
35 in.
Inches 38.1 cm
15 in.
Option 1 Trip force
Shear-bolt: 3,265 kg
7,200 lb
Standard type
Straight with wear shin: 19 or 31.75 mm
0.75 or 1.25 in.
Shear-bolt
Option 2 Trip force
1,451.5 kg
3,200 lb
Trip height
30.5 cm
12 in.
Standard type
19 mm
0.75 in.
Cushion trip
Spacing between standards 76.2 cm
30 in.
Description One set at front of machine
Type Disk or coulter
Blade size 50.8x0.65 cm
20x0.256 in.
On 2-bar: 0.45 cm
0.177 in.
Coulter size 50.8x0.5 cm
20x0.197 in.
Blade/coulter spacing 22.9 cm
9 in.
Type of scrapers Rigid bar
Type of protection Coil spring
Gang shaft 7.62x10.2 cm
3x4 in.
Option 1 Single wheel - 9.5L-15FI Load Range D (2-bar design)
Option 2 Single wheel 11L-15FI Load Range D (3-bar)
Option 3 Walking tandem - 9.5L-15FI Load Range D (3-bar)
Option 4 Walking tandem - 11L-15FI Load Range D (3-bar)
Options Standard: 19 mm (0.75 in.)
min-till point: 178 mm (7 in.)
low-disturbance: 254 mm (10 in.)
ultra-low-disturbance: 63 mm (2.5 in.)
Standard: 31.75 mm (1.25 in.)
Regular: 57 mm (2.25 in.)
Capped: 57 mm (2.25 in.)
Double-capped: 57 mm (2.25 in.)
LaserRip points: 70 mm (2.75 in.), 127 mm (5 in.), and 178 mm (7 in.)
Type In-line ripper
Type Spring cushion coulters
Pounds of force Normal working load: 272.2 kg
600 lb
Deflection of: 10.2 cm
4 in.
Maximum trip load: 362.9 kg
800 lb
Deflection of: 20.3 cm
8 in.
Blades Straight or rippled: 559x4.5 mm
22x0.1777 in.
Down force 113.4 kg
250 lb
Size 10.2x40.6 cm
4x16 in.
Spacing 19.05 to 35.6 cm
7.5 to 14 in.
Angle adjustments 1 to 15 degree (angle)
Type Two Stabilizer wheels
Wheels 52.1x20.3 cm
20.5x8 in.
Tires 10 PR
Description VF280/70R15 Radial tire (with drawn hitch)

Related products