Commercial Mowers | ZTrak™Z955M EFI Zero-Turn Mowers

Commercial Zero Turn Mower
John Deere
#z955m_tc

Disclaimer |

Characteristics

  • 30.5-hp (22.7 kW) EFI gasoline engine
  • 54-in. and 60-in. 7-Iron™ PRO Side-Discharge Decks, 54-in. and 60-in. 7-Iron™ PRO Mulch On Demand™ Decks, 60-in. FastBack™ PRO Rear-Discharge Deck
  • Brake-N-Go starting
  • Cross-porting hydraulic transmission

Note that this product is available in store only.
Get pre-approved for financing

Description

With a focus on user-friendly features, the Z955M EFI is a practical mower for professionals looking to enhance their mowing operations.

Specifications

Engine Manufacturer/model FX781V EVO EFI
Engine power Gross at 3,600 rpm
30.5 hp
22.7 kW
Fuel tank capacity 11.5 U.S. gal.
43.5 L
Mower deck size 54-in. (137-cm) 7Iron™ PRO side-discharge
60-in. (152-cm) 7Iron™ PRO side-discharge
54-in. (137-cm) 7Iron™ PRO Mulch On Demand™
60-in. (152-cm) 7Iron™ PRO Mulch On Demand™
60-in. (152-cm) FastBack™ PRO rear-discharge
Blade tip speed 7Iron PRO: Approximately 18,500 fpm
60-in. (152-cm) FastBack: Approximately 16,500 fpm
Transmission Hydrostatic
Speed range 0-12 mph
0-19.3 km/h
Drive wheels 24x12-12
Caster wheels 13x6.5-6
Warranty 36 months or 1200 hours, whichever comes first
First 24 months, no hour limitation
Manufacturer/Model FX781V EVO EFI
Power Gross at 3,600 rpm
30.5 hp
22.7 kW
Displacement 50.2 cu in.
822 cc
Cylinders Two
Crankcase capacity With filter, 2.2 U.S. qt
2.1 L
Oil filter Full flow, replaceable
Lubrication Full pressure
Cooling Forced air, with integrated clean out ports and oil cooler
Air cleaner Pre-cleaner
Yes
Heavy-duty canister type with safety element
Fuel type Gasoline
Fuel consumption Under normal conditions, load, operation, and dependent on loads and operating conditions 7Iron PRO side-discharge: 1.3 U.S. gal./hr
4.9 L/hr
FastBack PRO rear-discharge: 1.1 U.S. gal./hr
4.2 L/hr
Fuel tank capacity 11.5 U.S. gal.
43.5 L
Fuel tank switch/shut-off valve No
Charge system 30 amp
Battery voltage 12 V
Cold cranking amp 300 amp
Hour meter Display panel including hour meter, fuel level, engine speed, system voltage, low engine oil pressure indicator, starting interlock indicators (PTO, operator presence, park brake), caution warning, stop warning, and on-board diagnostics
Operator presence starting system Brake-N-Go (hand)
Transmission Hydrostatic
Wheel motors Tuff Torq heavy-duty integrated piston wheel motor with cross porting
Travel speed Speed range
0-12 mph
0-19.3 km/h
Forward
0-12 mph
0-19.3 km/h
Reverse
0-4.5 mph
0-7.2 km/h
Speed and direction control Twin levers
Hydraulic capacity 5.9 U.S. qt
5.6 L
Filter Internal, replaceable
Warranty 36 months or 1200 hours, whichever comes first
First 24 months, no hour limitation
Drive wheels 24x12-12
Load rating 4 PR
Dynamic braking Twin levers
Park brake Internal wet disk integrated in the transmission
Park brake actuation Hand brake
Type Electro-magnetic, 225 lb-ft
305 Nm
Drive V-belt
Size 54-in. (137-cm) 7Iron™ PRO side-discharge
60-in. (152-cm) 7Iron™ PRO side-discharge
54-in. (137-cm) 7Iron™ PRO Mulch On Demand™
60-in. (152-cm) 7Iron™ PRO Mulch On Demand™
60-in. (152-cm) FastBack™ PRO rear-discharge
Deck construction 7-Iron™ PRO: 7-gauge, 0.179-in. (4.6-mm) one-piece forged steel
FastBack™ PRO: 7-gauge, 0.179-in. (4.6-mm) fabricated steel
Height-of-cut range Increments
0.25 in.
0.64 cm
1-5.5 in.
2.54-14 cm
Cutting width 54, 60 in.
137, 152 cm
Length Varies by deck size
Thickness 7Iron PRO: 0.25 in.
6.4 mm
FastBack PRO: 0.31 in.
8 mm
Blade tip speed 7Iron PRO: Approximately 18,500 fpm
60-in. (152-cm) FastBack: Approximately 16,500 fpm
Number Three
Caster wheel type Flat free
Caster wheels 13x6.5-6
Front anti-scalp rollers Left, center, right
Rear anti-scalp rollers 7Iron PRO: Left, center, right
FastBack PRO: Left, right
Length 87 in.
221 cm
Width With chute down, 68, 74 in.
173, 188 cm
Rear discharge, 63.5 in.
161.3 cm
Height With ROPS up, 73 in.
185 cm
With ROPS down, 47 in.
119 cm
Weight 1383 to 1454 lb
627 to 660 kg
Rollover protective structure (ROPS) Yes
Slope operating limit 20 degrees (10 degrees with material collection system installed)
Date collected 01-Oct-2024