Description
2720 Disk Ripper. Nowhere on earth can you find a disk ripper that does all this: Size and manage residue. Penetrate and shatter the compaction layer. Bury and mix residue. And help level the soil profile. All in just one pass.
Primary Tillage | 2720 Disk Ripper
EquipmentJohn Deere
#2720xh
Characteristics
- Bury residue to 15-in. (38.1 cm) depths
- Improved residue flow in wet conditions
- The most level soil profile from a ripper
- Exclusive hydraulic rolling basket option
Specifications
| Working width |
3.8-8.4 m 12.5-27.5 ft |
| Transport width |
With furrow filler attachment: 5.2-5.6 m 16.9-18.4 ft |
| Maximum operating depth |
40.6 cm 16 in. |
| Operating speed |
8-11.3 km/h 5-7 mph |
| Horsepower required per standard |
66-75.6 kW 41-47 hp |
| Standards |
Spacing 76.2 cm 30 in. |
| Configuration | Disk - Ripper - Disk - Conditioner |
| Option 1 |
Rigid 5-standard on spacing of 76.2 cm 30 in. |
| Option 2 |
Rigid 7-standard on spacing of 76.2 cm 30 in. |
| Option 3 |
Gang-fold rigid 7-standard on spacing of 76.2 cm 30 in. |
| Option 4 |
3-section flex-fold 9-standard on spacing of 76.2 cm 30 in. |
| Option 5 |
3-section flex-fold 11-standard on spacing of 76.2 cm 30 in. |
| Option 1 |
3.8 m 12.5 ft |
| Option 2 |
5.3 m 17.5 ft |
| Option 3 |
5.3 m 17.5 ft |
| Option 4 |
6.9 m 22.5 ft |
| Option 5 |
8.4 m 27.5 ft |
| Option 1 |
With furrow filler attachment: 5.2 m 16.9 ft |
| Option 2 |
With furrow filler attachment: 6.8 m 22.4 ft |
| Option 3 |
With furrow filler attachment: 5.5 m 18 ft |
| Option 4 |
With furrow filler attachment: 5.6 m 18.4 ft |
| Option 5 |
With furrow filler attachment: 5.6 m 18.4 ft |
| Maximum operating depth |
40.6 cm 16 in. |
| Standard |
25.4 cm 10 in. |
| Maximum |
95.25 cm 37.5 in. |
| Operating speed |
8-11.3 km/h 5-7 mph |
| Horsepower required per standard |
66-75.6 kW 41-47 hp |
| Option 1 | Single-point crank |
| Option 2 | TruSet™ tillage |
| Option 1 |
2 SCVs (depth control, optional rolling baskets) at 17,237 kPa 2,500 psi for optimum raise times |
| Option 2 |
3 SCVs (depth control, wingfold, optional rolling baskets) at 17,237 kPa 2,500 psi for optimum raise times |
| Design |
Single hitch tube: 15.2x25.4 cm 6x10 in. |
| Fore-aft adjustment | Hitch turnbuckle |
| Spacing |
76.2 cm 30 in. |
| Trip force |
Cushion-trip standard: 1,859.7 kg 4,100 lb |
| Trip height |
Shear bolt protected above: 33 cm 13 in. |
| Type | Parabolic with or without wear shins, straight with wear shins |
| Type |
Wingless, LaserRip™ II points: 12.7 cm 5 in. 17.8 cm 7 in. 25.4 cm 10 in. |
| Coverboards | Parabolic cushion-trip standards with wear shins and holes to mount coverboards |
| Description | Disk - Shank - Disk configuration |
| Depth control |
TruSet in-cab controls Single-point depth control |
| Maximum depth |
15.2 cm 6 in. |
| Type of standard | C-spring |
| Base equipment blades |
Solid spherical low-concavity disk blades: 610x6.5 mm 24x0.256 in. |
| Blade spacing |
27.9 cm 11 in. |
| Front frame angle | Fixed: 18 degree (angle) |
| Rear frame angle | 14-16 degree (angle) |
| Bearings | Sealed, maintenance-free |
| Scraper | Heavy-duty floating combination scraper (base option) |
| Type |
Tandem walk-over wheels options dependent on configuration (4)11L-15 FI D LR tires (4)340/65R18 Goodyear® tires (4)340/65R18 Michelin® tires |
| Type | Walk-Over tandem wheels, 57.2-mm (2.25-in.) diameter plug-in spindles and bolt hubs |
| Option 1 |
Hydraulically adjustable finishing attachments Knife-edge rolling basket Round-bar rolling basket |
