Commercial Mowers | ZTrak™ Z950R Zero-Turn Mowers

Commercial Zero Turn Mower
John Deere
#950r_tc

Disclaimer |

Characteristics

  • 7-Iron™ PRO Mowing Deck
  • Mulch On Demand™ Available
  • Rear Discharge Deck
  • Cross-porting hydraulic transmission

Note that this product is available in store only.
Get pre-approved for financing

Description

The ZTrak Z900 R Series was created for contractors who demand the best and want the ultimate in features. Build your own today.

Specifications

Engine Manufacturer/model FX850V
Engine power Gross at 3,600 rpm
27 hp
20.1 kW
Fuel tank capacity 11.5 U.S. gal.
43.5 L
Mower deck size 60-in. (152-cm) 7Iron™ PRO side-discharge
72-in. (183-cm) 7Iron™ PRO side-discharge
60-in. (152-cm) 7Iron™ PRO Mulch On Demand™
60-in. (152-cm) FastBack™ PRO rear-discharge
Blade tip speed 7Iron PRO: Approximately 18,500 fpm
60-in. (152-cm) FastBack: Approximately 16,500 fpm
Transmission Hydrostatic
Speed range 0-12 mph
0-19.3 km/h
Drive wheels 24x12-12
Caster wheels 13x6.5-6
Warranty 36 months or 1500 hours, whichever comes first
First 24 months, no hour limitation
Manufacturer/Model FX850V
Power Gross at 3,600 rpm
27 hp
20.1 kW
Displacement 52 cu in.
852 cc
Cylinders Two
Crankcase capacity With filter, 2.4 U.S. qt
2.3 L
Oil filter Full flow, replaceable
Lubrication Full pressure
Cooling Air
Air cleaner Pre-cleaner
Yes
Heavy-duty canister type with safety element
Fuel type Gasoline
Fuel consumption Under normal conditions, load, operation, and dependent on loads and operating conditions 1.1-1.9 U.S. gal./hr
4.2-7.2 L/hr
Fuel tank capacity 11.5 U.S. gal.
43.5 L
Fuel tank switch/shut-off valve Yes
Charge system 20 amp
Battery voltage 12 V
Cold cranking amp 300 amp
Hour meter Standard, digital
Operator presence starting system Brake-N-Go (foot)
Transmission Hydrostatic
Wheel motors Tuff Torq heavy-duty integrated piston wheel motor
Travel speed Speed range
0-12 mph
19.3 km/h
Forward
0-12 mph
19.3 km/h
Reverse
0-4.5 mph
0-7.2 km/h
Speed and direction control Twin levers
Hydraulic capacity 5.9 U.S. qt
5.6 L
Filter Internal, replaceable
Warranty 36 months or 1500 hours, whichever comes first
First 24 months, no hour limitation
Drive wheels 24x12-12
Load rating 4 PR
Dynamic braking Twin levers
Park brake Internal wet disk integrated in the transmission
Park brake actuation Foot brake
Type Electro-magnetic, 225 lb-ft
305 Nm
Drive V-belt
Size 60-in. (152-cm) 7Iron™ PRO side-discharge
72-in. (183-cm) 7Iron™ PRO side-discharge
60-in. (152-cm) 7Iron™ PRO Mulch On Demand™
60-in. (152-cm) FastBack™ PRO rear-discharge
Deck construction 7-Iron™ PRO: 7-gauge, 0.179-in. (4.6-mm) one-piece forged steel
FastBack™ PRO: 7-gauge, 0.179-in. (4.6-mm) fabricated steel
Height-of-cut range Increments
0.25 in.
0.64 cm
1-5.5 in.
2.54-14 cm
Cutting width 60, 72 in.
152, 183 cm
Length Varies by deck size
Thickness 0.25 in.
0.64 cm
Blade tip speed Approximately 18,000 fpm
7Iron PRO: Approximately 18,500 fpm
60-in. (152-cm) FastBack: Approximately 16,500 fpm
Number Three
Caster wheel type Flat free
Caster wheels 13x6.5-6
Front anti-scalp rollers RH, center, LH
Rear anti-scalp rollers Standard
Length 84 in.
213 cm
Width With chute down, 74, 86 in.
188, 218 cm
Rear discharge, 63.5 in.
161.3 cm
Height With ROPS up, 73 in.
185 cm
With ROPS down, 47 in.
119 cm
Weight 1,315 to 1,423 lb
596 to 645 kg
Rollover protective structure (ROPS) Yes
Slope operating limit 20 degrees (10 degrees with material collection system installed)
Date collected 15-Mar-2023