Fairway Reel Mowers | 8000A E-Cut™ Hybrid

Fairway Mowers
John Deere
#800avtc

Disclaimer |

Characteristics

  • TechControl™ Display locks in performance, and uptime
  • Final Tier 4 without sacrificing horsepower
  • Proven hybrid design eliminates hydraulics from reel circuit
  • Highly maneuverable, 3-wheel low PSI smooth tire configuration

Note that this product is available in store only.
Get pre-approved for financing
SKU: 800avtc Categories: , ,

Description

8000A E-Cut Hybrid 3-Wheel Fairway Mower, featuring programmable TechControl Display.

Specifications

Maximum rated horsepower At 2800 rpm ISOC: 31 kW
41.6 hp
Drive pump N/A due to Electric Driven Cutting units
Ground pressure 69 kPa
10 psi
Throttle Automatic controls with AutoPedal foot controls; manual control through TechControl display
Operator display TechControl Display; Located on Command Arm; displays machine warnings, on-board electrical diagnostics; service timers on large easy to read screen; quick on the go settings for mow and transport speed; Turn Speed; Loadmatch™ and ON/OFF Cruise Control Use selection: all settings are pass code protected
Mowing speed 12.8 km/h
8 mph
Cutting unit size Quick Adjust QA5: 45.7 cm
18 in.
Total width of cut 203 cm
80 in.
Reel diameter 12.7 cm
5 in.
Frequency of clip (FOC Reels) OR Blade tip speed (decks) 11 Blade: 0.69 mm/km/h
0.044 in./mph
7 blade: 1.09 mm/km/h
0.069 in./mph
Type Direct Inject Turbocharged Diesel
Compliant emission regulation United States and Canada Tier 4
Horsepower Maximum rated horsepower
At 2800 rpm ISOC: 31 kW
41.6 hp
Cylinders Three
Displacement 1.568 L
95.69 cu in.
Air cleaner 2-stage dry element
Fuel Diesel Up to B20 compliant
Cooling system Liquid centrifugal pump; forward machine location for optimum cooling
Drive pump N/A due to Electric Driven Cutting units
Hydraulic system capacity 37.8 L
10 U.S. gal.
Fuel tank capacity 45.4 L
12 U.S. gal.
Steering Hydraulic power with double acting steering cylinder
Front drive tires 24x13x12 smooth
Steering tires 24x13x12 smooth
Ground pressure 69 kPa
10 psi
Brakes Internal hydraulic wet disc brakes with dynamic braking through closed loop hydrostatic system
ROPS Standard; meets ISO 21299 Standard
Cutting units lowered 2131 lb
967 kg
Throttle Automatic controls with AutoPedal foot controls; manual control through TechControl display
Forward/reverse 2-pedal
Mower lift One-touch single handle
Parking brake Electric Switch on Command Arm for Internal Wet Disk Brakes
Seat Suspension seat with seat belts and arm rest; fore/aft adjustment; weight and lumbar adjustment
PTO Electric Switch on Command Arm
Tilt steering Left Foot operated for easy adjustment
Operator display TechControl Display; Located on Command Arm; displays machine warnings, on-board electrical diagnostics; service timers on large easy to read screen; quick on the go settings for mow and transport speed; Turn Speed; Loadmatch™ and ON/OFF Cruise Control Use selection: all settings are pass code protected
Storage Cup holder; two-way radio; large operator storage located on left hand side of operator station
Height with ROPS 210.8 cm
83 in.
Length 292 cm
115 in.
Transport width 89 in.
226 cm
Mowing position width 236 cm
93 in.
Ground speed Mowing
12.8 km/h
8 mph
Transport
19.3 km/h
12 mph
Reverse
9.6 km/h
6 mph
Number Five
Size Quick Adjust QA5: 45.7 cm
18 in.
Total width of cut 203 cm
80 in.
Height of cut Construction
Requires option bedknife for lowest HOC and 76.2 mm (3 in.) roller for highest: 2-28.5 mm
0.078-1.125 in.
Frequency of clip (FOC Reels) OR Blade tip speed (decks) Rollers
Front and rear: 51 in.
2 in.
Optional: 76.2 mm
3 in.
11 Blade: 0.69 mm/km/h
0.044 in./mph
7 blade: 1.09 mm/km/h
0.069 in./mph
Reel diameter 12.7 cm
5 in.
Measuring standard ISO 11201
Attachments installed FTCs, reels engaged
Actual Fuel usage will vary depending on course conditions, operation, turf and fuel quality 25% load: 2.8 L/hr
0.74 gph
40% load: 4.32 L/hr
1.14 gph
50% load: 5.22 L/hr
1.38 gph
Type Two-year limited
Type ANSI B71.4-2012