Description
6080A E-Cut™ Hybrid Fairway Mower.
Home / Equipment / Golf Equipment / Fairway Mowers /
6080A E-Cut™ Hybrid | Fairway Mowers
Fairway MowersJohn Deere
#6080a_e-cut
Characteristics
- 24.7 HP* engine
- 3-wheel smooth tire configuration
- Passcode protected TechControl display
- Hybrid system – reduced fuel consumption / noise reduction / hydraulic leak points
- Width of Cut – 80" (5 18” QA5)
Specifications
| Maximum rated horsepower |
At 3000 rpm: 18.4 kW 24.7 hp High idle: 3200 rpm |
| Drive pump | Axial piston, electronically controlled hydrostatic traction pump; single gear pump for steering, lift, and charge; electric reel drive |
| Ground pressure |
69 kPa 10 psi |
| Throttle | Hand throttle |
| Operator display |
TechControl display located on CommandARM™ console: machine warnings, onboard electrical diagnostics, service timers on large easy-to-read screen, quick on-the-go settings for mow and transport speed, Turn Speed, LoadMatch™ switch, and ON/OFF cruise control use selection All settings passcode protected |
| Mowing speed |
12.8 km/h 8 mph |
| Cutting unit size |
Quick Adjust 5 (QA5): 45.7 cm 18 in. |
| Total width of cut |
203 cm 80 in. |
| Reel diameter |
12.7 cm 5 in. |
| Frequency of clip (FOC Reels) OR Blade tip speed (decks) |
11- blade: 0.69 mm/km/h 0.044 in./mph 7-blade: 1.09 mm/km/h 0.069 in./mph |
| Type | Indirect inject diesel |
| Compliant emission regulation | United States and Canada: Tier 4 |
| Horsepower |
Maximum rated horsepower At 3000 rpm: 18.4 kW 24.7 hp High idle: 3200 |
| Cylinders | Three |
| Displacement |
1.267 L 77.32 cu in. |
| Air cleaner | Two-stage dry element |
| Fuel | Diesel up to B20 compliant |
| Cooling system | Liquid centrifugal pump; forward machine location for optimum cooling |
| Drive pump | Axial piston, electronically controlled hydrostatic traction pump; single gear pump for steering, lift, and charge; electric reel drive |
| Hydraulic system capacity |
37.8 L 10 U.S. gal. |
| Fuel tank capacity |
45.4 L 12 U.S. gal. |
| Steering | Hydraulic power with double acting steering cylinder |
| Front drive tires | 24x13-12 smooth |
| Steering tires | 24x13-12 smooth |
| Ground pressure |
69 kPa 10 psi |
| Brakes | Internal hydraulic wet disc brakes with dynamic braking through closed loop hydrostatic system |
| ROPS | Standard; meets ISO 21299 Standard |
| Cutting units lowered |
1080 kg 2381 lb Canopy, fairway tender conditioners, and power brushes installed with full fuel |
| Throttle | Hand throttle |
| Forward/reverse | Two pedal |
| Mower lift | One-touch single handle |
| Parking brake | Electric switch on CommandARM for internal wet disk brakes |
| Seat | Suspension seat with seat belts and armrest, fore/aft adjustment, and weight and lumbar adjustment |
| PTO | Electric switch on CommandARM |
| Tilt steering | Left-foot operated for easy adjustment |
| Operator display |
TechControl display located on CommandARM: machine warnings, onboard electrical diagnostics, service timers on large easy-to-read screen, quick on-the-go settings for mow and transport speed, Turn Speed, LoadMatch, and ON/OFF cruise control use selection All settings passcode protected |
| Storage | Cup holder, two-way radio, and large operator storage located on left-hand side of operator station |
| Height with ROPS |
215.3 cm 84.8 in. |
| Length |
305 cm 120.1 in. |
| Transport width |
232 cm 91.3 in. |
| Mowing position width |
233 cm 91.7 in. |
| Ground speed |
Mowing 0 to 12.8 km/h 0 to 8.0 mph Transport 0 to 16.1 km/h 0 to 10.0 mph Reverse 0 to 9.7 km/h 0 to 6.0 mph |
| Number | Five |
| Size |
Quick Adjust 5 (QA5): 45.7 cm 18 in. |
| Total width of cut |
203 cm 80 in. |
| Height of cut |
Requires optional bedknife for lowest HOC and 76.2-mm (3-in.) roller for highest HOC: 2-28.5 mm 0.078-1.125 in. |
| Frequency of clip (FOC Reels) OR Blade tip speed (decks) |
Rollers Options available: 50.8 mm 2 in. 76.2 mm 3 in. 11- blade: 0.69 mm/km/h 0.044 in./mph 7-blade: 1.09 mm/km/h 0.069 in./mph |
| Reel diameter |
12.7 cm 5 in. |
| Measuring standard | ISO 11201 |
| Attachments installed | Fairway tender conditioners, reels engaged |
| Type | Two-year limited |
| Type | ANSI B71.4-2017 |
