X590, 54-in. Deck | X500 Select Series Lawn Tractor

Equipment
John Deere
#x590em

Disclaimer |

Characteristics

  • 25.5-hp (19.0 kW)* iTorque™ Power System
  • 54-in. (137 cm) Accel Deep™ Deck, compatible with optional MulchControl™ kit with one-touch technology
  • Electronic throttle control and power two-wheel steer

Note that this product is available in store only.
Get pre-approved for financing

Description

Find the latest features and pricing on the John Deere X590 Select Series Lawn Tractor with constant-speed governor technology.

Specifications

Engine power 25.5 hp
19 kW
Oil change No-tools oil drain with replaceable filter
Engine manufacturer/model FS730 EFI
Transaxle type K72 hydrostatic integrated with transaxle
Transaxle control Twin Touch™ pedals
Rear tires 24x12-12 HDAP
Lift system type Hydraulic
Cutting width Accel Deep™ mower deck, 54 in.
137 cm
U.S. warranty 4 year/500 hour bumper-to-bumper** (**Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.)
Power 25.5 hp
19 kW
Displacement 44.3 cu in.
726 cc
Manufacturer/model FS730 EFI
Type Electronic fuel injection (EFI), overhead valve, full-pressure lube, oil filter
Cylinders V-twin, cast-iron liners
Governor Constant-speed electronic throttle control
Choke/speed control No choke required
Cooling method Air
Air cleaner Dry, replaceable with foam precleaner
Oil change No-tools oil drain with replaceable filter
Type Gasoline
Fuel delivery Open-loop electronic fuel injection (EFI)
Fuel gauge Gauge on dash
Fuel tank location Rear
Fuel fill opening On left fender, 3 in.
7.6 cm
Fuel tank capacity 4.4 U.S. gal.
16.7 L
Battery 12 V
340 CCA
Charging system Flywheel alternator, regulated, 24 amp
Engine starter Solenoid shift
Hour meter Yes
Headlights Two standard, incandescent, 27 W
Taillights or reflector Reflectors
Backup lights No
Rear work lights No
12-V outlet Yes
Type K72 hydrostatic integrated with transaxle
Control Twin Touch™ pedals
Cruise control Yes, button on dash
Oil cooler Fins and fan on transaxle
Oil filter Yes, replaceable
Differential lock Standard
Forward speed 0-7.2 mph
0-11.6 km/h
Reverse speed 0-5.2 mph
0-8.4 km/h
Brakes Internal wet disc
Frame Welded heavy-duty
Primer/paint E-coat/powder
Weight bracket Standard front and rear - each holds up to four Quik-Tatch weights, 42 lb
19 kg
Receiver hitch No
Front axle Cast iron front axle, front wheel ball bearings
Spindle bushings Metal, replaceable
Front tires 16x6.5-8 turf
Rear tires 24x12-12 HDAP
Hood material Fully enclosed, molded-in color material reduces sound, will not rust or dent
Fender deck material Stamped steel
Floor mats Sure-grip rubber
Storage Yes, covered toolbox
Service interval decal Yes
Fender handles/grips Handles
Cup holder Yes
Equipment mounting Yes, heavy duty
Maximum towing capacity 800 lb
363 kg
Type Power, hydraulic
Four-wheel steer Not available on this model
Steering wheel 14 in.
35.6 cm
Tilt steering wheel Standard, five position
Turning radius 22 in.
55.9 cm
Uncut circle radius 24 in.
61 cm
Type Cut-and-sewn high-back
Seat back height 21 in.
53 cm
Armrests Optional
Fore-aft adjustment While seated, ball bearing slide rail, 15-position, 6.6 in.
17 cm
Seat suspension Six-position parallel arm
Type Hydraulic
Hydraulic outlets No
Mower cut height 13 positions, 1-4 in.
2.5-10.2 cm
Cut height increments 0.25 in.
0.64 cm
Preset cut height Yes
Type Side discharge
Cutting width Accel Deep™ mower deck, 54 in.
137 cm
Construction Forged steel deck shell
Mower deck material 10 gauge
0.135 in.
3.4 mm
Mower wash port Yes
Mower drive system Electric power take-off (PTO) clutch, in-line belt
Mower wheels Four
Mower wheel adjustment Seven-position, spring-loaded pin
Mower level adjustment Exact Adjust ports and deck-leveling gauge
Type Roll under tractor
Front draft arms Attached with spring pins at two points
Rear draft arms Quick-pull pins
Mower wheels rotate Yes, 90 degrees for easy mower removal
Drive system Dual belt
Meets ANSI standard Yes
Meets OPEI standard Yes
Backup protection Reverse Implement Option (RIO)
Safety video Yes
Notes Heavy-duty garden tractor transaxle
Convenient power steering and hydraulic lift
Built-in front and rear weight brackets
Warranty 4 year/500 hour bumper-to-bumper** (**Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.)
Mowers 54A (standard)
Rear bagger 7, 14, 19 bu
247, 493, 670 L
Powered material collection Power Flow™ blower
Mulching system Yes, MulchControl™
Front thatcher 38, 46, 54 in.
96.5, 116.8, 137.2 cm
Front blade 48 in.
121.9 cm
Snow blower Two-stage, 47 in.
119.4 cm
Rotary tiller Mechanical, 30 in.
76.2 cm
Hydraulic, 42 in.
106.7 cm
Sleeve hitch Yes, implements include box scraper, rear blade, plow, disk, and cultivator
Plow, moldboard Yes
Box scraper Yes
Cultivator Yes
Rear blade Yes
Sprayer Tow-behind, 15, 25 U.S. gal.
56.8, 94.6, 170.3 L
Mounted, 25 U.S. gal.
94.6 L
Spreader 125, 175 lb
57.7, 79.4 kg
Mounted, 125 lb
57.7 kg
Front bumper Standard front bumper/weight bracket
Brush guard Yes
Weather protection Weather enclosure
Sun canopy Yes
Bucket holder Yes, double bucket
Grass striping Lawn striping kit
Tractor shovel 40 in.
101.6 cm
Tow-behind tools 19
Height 52.7 in.
1338 mm
Overall length 77.4 in.
1966 mm
Wheelbase 51.2 in.
1300 mm
Width with mower 68.4 in.
1737 mm
Width with mower (deflector raised for storage) 58.3 in.
1481 mm
Width without mower 40.7 in.
1034 mm
Weight Mower, no fuel: 796 lb
361 kg
Manufacturing location Horicon, Wisconsin, USA
Date collected 3-Oct-22