Description
John Deere 220 E-Cut Hybrid Walk Greens Mowers.
Home / Equipment / Golf Equipment / Walk Greens Mowers /
Walk Greens Mowers | 220 E-Cut™ Hybrid | Walk Greens Mowers
Walk Greens MowersJohn Deere
#220eam
Characteristics
- Easy reel maintenance
- Quick and easy troubleshooting
- Maximum comfort and control
- Quick release to disengage traction
Specifications
| Engine Type | Air-cooled, Gas |
| Horsepower |
At 3600 rpm: 2.4 kW 3.2 hp Engine manufacturer net power, tested in accordance with SAE J1349. The engine horsepower and torque information are provided by the engine manufacturer to be used for comparison purposes only. Actual operating horsepower and torque will be less. Refer to the engine manufacturer’s website for additional information. |
| Cutting width |
55.9 cm 22 in. |
| Reel diameter |
127 mm 5 in. |
| Number of blades | 7, 11 or 14 blade |
| Frequency of clip standard |
Variable with 5 settings 11 Blade 4.1, 4.6, 5.6, 9.7, 12.2; 14 Blade 3.2, 3.6, 4.4, 7.6, 9.6 mm Variable with 5 settings 11 Blade 0.162, 0.180, 0.220, 0.380, 0.480; 14 Blade 0.120, 0.140, 0.180, 0.300, 0.380 in. |
| Traction drum | Dual, aluminum |
| Forward speed |
With transport wheels at 3000 engine rpm: 7.2 km/h km/h 4.5 mph |
| Weight (less GTCs, gear drive and transport wheel with catcher) |
119 kg 262 lb |
| Operator ear | 79 dBA |
| Type | Air-cooled, Gas |
| Cycle | 4-cycle |
| Bore and stroke |
60x42 mm 2.36x1.65 in. |
| Piston displacement |
122 cc 7.4 cu in. |
| Compression ratio | 8.5:1 |
| Horsepower |
At 3600 rpm: 2.4 kW 3.2 hp Engine manufacturer net power, tested in accordance with SAE J1349. The engine horsepower and torque information are provided by the engine manufacturer to be used for comparison purposes only. Actual operating horsepower and torque will be less. Refer to the engine manufacturer’s website for additional information. |
| Direction of rotation of output shaft | Counterclockwise viewed from shaft side |
| Inclination limit | Tilted up to 20 degrees in any direction |
| Idle speed at output shaft | 1700 (+/- 100) rpm |
| Maximum speed at output shaft | 2950 (+/-150) rpm |
| Type | Regular grade unleaded or leaded |
| Tank capacity |
2.5 L 0.66 U.S. gal. |
| Type | SAE 30 or SAE 10W-30 |
| Capacity |
0.6 L 0.63 U.S. qt |
| Differential drive capacity |
0.14 pt 0.3 L |
| Cutting width |
55.9 cm 22 in. |
| Cutting height (minimum) |
Standard - 3.0-mm bedknife Min. 3.2 mm 0.125 in. Max: 22 mm 0.875 in. option Optional - 2.5-mm bedknife Min 2.5 mm 0.098 in. Max. 22 mm 0.875 in. option Optional - 2.0-mm bedknife Min 2.0 mm 0.078 in. Max. 22 mm 0.875 in. standard |
| Frequency of clip standard |
Variable with 5 settings 11 Blade 4.1, 4.6, 5.6, 9.7, 12.2; 14 Blade 3.2, 3.6, 4.4, 7.6, 9.6 mm Variable with 5 settings 11 Blade 0.162, 0.180, 0.220, 0.380, 0.480; 14 Blade 0.120, 0.140, 0.180, 0.300, 0.380 in. |
| Diameter |
127 mm 5 in. |
| Number of blades | 7, 11 or 14 blade |
| Material | Heat-treated chromium molydenum steel |
| Brush |
Interlocked with reel, rotation in reverse direction; nylon diameter: 60 mm 2.375 in. |
| Adjustable brush or cutter height |
Brush even with height-of-cut; GTC below height-of-cut maximum: 0.8 mm 0.031 in. |
| Size, lb (kg) |
3.2 kg 7 lb |
| Type | Polyethylene |
| Transport | Belt tension |
| Reel jaw-type clutch | On/off |
| Brush/GTC jaw-type clutch | On/off |
| Traction drum | Dual, aluminum |
| Forward speed |
With transport wheels at 3000 engine rpm: 7.2 km/h 4.5 mph |
| Roller - rear |
Aluminum, diameter: 190 mm 7.5 in. |
| Roller - front (grooved or smooth) |
Machined steel, diameter: 50 mm 2 in. for cutting height adjustment) |
| Length (with tires installed) |
99 cm 39 in. |
| Width (with tires installed) |
94.6 cm 37.25 in. |
| Height (with tires installed) |
119 cm 47 in. |
| Weight (less GTCs, gear drive and transport wheel with catcher) |
119 kg 262 lb |
| Type | ANSI B71.4-2004 |
| Operator ear | 79 dBA |
| Measuring standard | ISO 11201 |
| Attachments installed | GTCs, reels engaged |
