Rotary Cutters | E12 Flex Wing Rotary Cutter

Commercial Mower
John Deere
#0e12xp

Disclaimer |

Characteristics

  • 12 ft. cutting width
  • 540 PTO RPM
  • Newly-designed cutting chamber
  • 40-plus HP tractor PTO compatibility

Note that this product is available in store only.
Get pre-approved for financing

Description

New 12 foot cutting width has a newly designed cutter chamber.

Specifications

Cutting width 3.7 m
12 ft
Cutting capacity (diameter) 50.8 mm
2 in.
Tractor PTO HP range 30 kW
40 hp
Transport width 7.5 ft (2.3 m) at wing wheels
Deck thickness - upper - lower 11 gauge - 3 mm
0.12 in.
Shirt thickness 3 gauge - 6 mm
0.24 in.
Approx. weight 1623 kg
3580 lb
Drivelines - Size - Main CV ASAE Category 4, splined telescoping profiles
Blade tip speed - 540 rpm - 1000 rpm 86.6 m/s
284.1 fps
Gearboxes Five years
Cutting width 3.7 m
12 ft
Cutting height 25.4-406.4 mm
1-16 in.
Cutting capacity (diameter) 50.8 mm
2 in.
Cutting chamber depth 254 mm
10 in.
Tractor PTO HP range 30 kW
40 hp
Tractor PTO 540 rpm
Type Standard self-level hitch clevis with 57.2-cm (22.5-in.) narrow-profile width
Jackstand Mechanical jackstand in base for all machines. Hydraulically operated height, stays vertical while raising/lowering.
Transport width 7.5 ft (2.3 m) at wing wheels
Overall width 3.8 m
12.4 ft
Overall length 4.8 m
15.7 ft
Deck shape Easy-clean dome-shaped top deck
Deck type Single dome deck
Deck thickness 11 gauge - 3 mm
0.12 in.
Shirt thickness 3 gauge - 6 mm
0.24 in.
Hinges Intermittent cast steel segments - greaseable single 2.5-cm (1-in.) diameter full-length hinge pin
Approx. weight 1623 kg
3580 lb
Size Main
CV ASAE Category 4, splined telescoping profiles
Connecting
ASAE Category 4, splined telescoping profiles
Protection Connecting
No-seize, slip-clutch driveline
Number 4
HP rating Transfer
Continuous: 186 kW
250 hp
Peak: 224 kW
300 hp
Center
Continuous: 56 kW
75 hp
Peak: 75 kW
100 hp
Outer
Continuous: 56 kW
75 hp
Peak: 75 kW
100 hp
Thickness 13 mm
0.5 in.
Width 102 mm
4 in.
Type Suction
Overlap 152 mm
6 in.
Blade tip speed 540 RPM
86.6 m/s
284.1 fps
Blade holder Type
Round stump jumper for maximum protection for blade carrier against obstruction damage
Wing lift Simultaneous
Wing flex For transport: upward 90 degree (angle)
Working angles: upward 45 degree (angle)
downward 22 degree (angle)
Type Option 1
4-bolt, laminated: 21x5.25x9
Option 2
4-bolt, 16PR severe-duty ag: 21x7x12
Suspension No suspension - rigid back axle
Row width adjustment No
Wing-leveling adjustment Easy adjust turnbuckle with bearing
Front Single-row chain guard
Rear Single-row chain guard
Gearboxes Five years