0% financing for 60 months

4052M Heavy Duty | Compact Tractors

4 Series Compact Tractors
John Deere
#4052hlv

Disclaimer |

Characteristics

  • Factory-installed 440R Quick Park™ Loader Mounting System included
  • Turbocharged diesel engine
  • eHydrostatic Transmission
  • Standard mid and rear hydraulics
  • Category 1 and 2, Three-point hitch

For pricing and additional discounts, see your local John Deere Dealer.

Note that this product is available in store only.
Get pre-approved for financing

Description

Enjoy power without compromise with the 4M Series Compact Utility Tractors.

Specifications

Engine power (gross) 37.9 kW
51.5 hp
PS at 2600 rpm
SAE J1995 rated power
Power take-off (PTO) power eHydro™ transmission: 30.5 kW
40.9 hp
Per SAE J1995
Steering hydraulics 23.5 L/min
6.2 gpm
Implement hydraulics 42.3 L/min
11.2 gpm
Hitch type Category 1/Category 2
Lift capacity, 24-in. behind link arms 1135 kg
2500 lb
Standard transmission; forward/reverse eHydro transmission
Cruise control Standard
Approximate shipping weight (open-station; cab) Open station: 1943 kg
4255 lb
Cab: Not applicable
Wheelbase 185.5 cm
73 in.
Family EYDXL2.09TDA
FYDXL2.09TDA
GYDXL2.09TDA
Manufacturer Yanmar®
Engine model 4TNV86CT-MJT
Engine power (gross) 37.9 kW
51.5 hp
PS at 2600 rpm
SAE J1995 rated power
Power take-off (PTO) power eHydro™ transmission: 30.5 kW
40.9 hp
Per SAE J1995
Rated engine speed 2600 rpm
Type Diesel
Injection pump type High-pressure common rail direct injection
Aspiration Turbocharged
Emissions compliance Final Tier 4
Cylinders/displacement 4 cylinders
2.091 L
127.6 cu in.
Number of cylinders Four
Cylinder liners Cast-in-block
Bore and stroke 86 x 90 mm
3.4 x 3.54 in.
Compression ratio 19.1:1
Lubrication Pressurized
Cooling system Liquid
Air cleaner Dual element with electronic restriction indicator
Engine torque at rated speed 139 Nm
102.5 lb-ft
Fuel tank capacity 56.9 L
15 U.S. gal.
Battery size 770 CCA
Alternator (12-V) 75 amp
Starter size 2 kW
2.68 hp
Type High pressure common rail direct injection
Standard transmission; forward/reverse eHydro transmission
Transmission gear ranges eHydro - Infinitely-variable three range
Final drive Planetary
Brakes Multi-plate wet disc
Steering Hydrostatic power steering
Clutch, wet/dry Wet
Clutch disk diameter wet clutch 129 mm
5.08 in.
Axle capacity Front
1600 kg
3528 lb
Rear
2400 kg
5292 lb
Creeper SpeedMatch™ standard
Cruise control Standard
Differential lock Yes
Type Open center
Pump rated output Steering
23.5 L/min
6.2 gpm
Implement
42.3 L/min
11.2 gpm
Pump type Single gear
Draft control sensing Position control
Remote control valves available Two remotes standard
Type Category 1/Category 2
Lift capacity, 24-in. behind link arms 1135 kg
2500 lb
Standard Independent 540 rpm at 2600 rpm
Optional 540E rpm
Control Independent
Clutch Wet disc
Crankcase with filter 5.3 L
1.4 qt
Transmission and hydraulic system 47.3 L
12.5 gal.
Type Planetary
Differential lock Yes
Rollover protective structure Type
Foldable
Yes
Platform - flat/straddle Flat
Wheelbase 185.5 cm
73 in.
Front axle clearance 35.1 cm
13.8 in.
Turning radius with brakes 2.8 m
9.19 ft
Turning radius without brakes 3 m
9.84 ft
Approximate shipping weight (open-station; cab) Open station: 1943 kg
4255 lb
Cab: Not applicable
Front R4 Industrial 31.5x13-16.5
Rear R4 Industrial 16.9-24
R4 Industrial 19.5L-24
Front tread range 1374.6 mm
54.1 in.
Rear tread spacing 1375 mm
54.1 in.
1495 mm
58.9 in.