Description
The 5090GV have enough of what it takes to get the job done whether you’re working in the vineyard, vegetable farm or orchard.
Home / Equipment / Tractors / Specialty Tractors /
5090GV | Specialty Tractors
Specialty TractorsJohn Deere
#5090gat_gv
Characteristics
- FT4 90 hp engine/76 hp PTO
- Two transmissions available: 12F/12R and 24F/12R
Specifications
| Engine description | 3.4L Fiat® Powertrain Technologies |
| Engine displacement |
4 cylinder: 3.4 L 207 cu in. |
| Rated engine power |
67.1 kW 90 hp |
| Rated PTO power (hp SAE) |
59 kW 79 hp |
| Transmission type | 24F/12R PowrReverser, EH Hi-Lo |
| Hydraulic pump rated output |
Standard: 96.5 L/min 25.5 gpm Optional: 126.4 L/min 33.4 gpm |
| Rear hitch category (SAE designation) | Category 1/Category 1N |
| Base machine weight |
OOS: 2529.7 kg 5577 lb Cab: 2744.7 kg 6051 lb |
| Description | 3.4L Fiat® Powertrain Technologies |
| Engine family | FPTF34 |
| Rated speed | 2300 rpm |
| Aspiration | Turbocharged |
| Cylinders liners | Wet sleeved |
| Emission level | Final Tier 4 |
| After treatment type | Diesel Oxidation Catalyst (DOC) and Selective Catalyst Reduction (SCR) |
| Displacement |
4 cylinder: 3.4 L 207 cu in. |
| Rated power |
67.1 kW 90 hp |
| Rated PTO power (hp SAE) |
59 kW 79 hp |
| Type | 24F/12R PowrReverser, EH Hi-Lo |
| Reverser | Yes |
| Clutch; wet/dry | Wet |
| Creeper | Yes |
| Type | Open Center |
| Pump rated output |
Standard: 96.5 L/min 25.5 gpm Optional: 126.4 33.4 gpm |
| Available flow at a single rear SCV |
41.6 L/min 11 gpm |
| Number of rear selective control valves (SCVs) |
Standard: 2 Optional: 4 |
| SCV control | Mechanical |
| Hitch draft control load sense type | Mechanical |
| Hitch category (SAE designation) | Category 1/Category 1N |
| Maximum lift capacity behind lift points |
2549 kg 5620 lb |
| Sensing type | Top Link Draft Sensing |
| Drawbar category | Extendable |
| Type | Standard: 540/540E |
| Engine rpm (at rated PTO speeds) |
540 at 1938 rpm 540E at 1648 rpm |
| PTO actuation | Electrohydraulic |
| Type | Carraro Drivetech |
| Final drive type | Three point inboard planetary drives |
| Differential controls | Multi disk oil cooled design |
| Axle type | Flanged |
| Brakes, type and control | Multi-disc rear braking |
| Rear differential lock | Electrohydraulic |
| Type | Carraro Drivetech |
| Front axle differential lock | Self Locking Differential |
| Front | 6.50R16 |
| Rear | 260/70 R16 |
| Turning radius without brakes |
3627 mm 11.9 ft |
| Type | Dynamic Load Sensing, Hydrostatic, Flow Metering |
| Alternator size | 120 amp |
| Rollover protective structure, OOS |
Rigid - foldable - telescopic Rigid, front folding Platform - flat/straddle Straddle Gearshift location - console/floor Floor Yes |
| Seat |
OOS: standard: COBO MT SC74 M200 Optional: COBO MT SC74 M97 Cab: standard: COBO MT SC74 M200 |
| dB(A) rating | 82 |
| Wheelbase |
2098 mm 82.5 in. |
| Overall length |
4319 mm 170 in. |
| Drawbar clearance |
Min. 226.1 mm 8.9 in. Max. 266.7 mm 10.5 in. |
| Front axle center |
Min. 226.1 mm 8.9 in. Max. 266.7 mm 10.5 in. |
| Base machine weight |
OOS: 2529.7 kg 5577 lb Cab: 2744.7 kg 6051 lb |
| Fuel tank |
Standard: 73.1 L 19.3 U.S. gal. |
| Interval for engine oil change | 500 |
| Interval for hydraulic/transmission oil change | 750 |
