Mower-Conditioners | C400 Mower-Conditioner

Equipment
John Deere
#c400_e

Caracteristics

  • Reduce service time with Quick Change Knives
  • Updated design and styling
  • Decreased horsepower and fuel requirements due to lighter weight1
  • Easier serviceability with modular-design cutterbar
  • Impeller, urethane or V-10 conditioners

Please note that this product is not available online.
Get pre-approved for financing
SKU: c400_e Categories: , ,

Description

The C400 Mower-Conditioner delivers a fast, clean cut, field after field, season after season.

Specifications

PTO speed 1000 rpm
1000 rpm 1-3/8 in. PTO 95-150 hp
71-112 kW
Standard hitch Rockshaft swivel
Optional hitch Drawbar swivel
Hydraulic pressure required 15,513 kPa
2,250 psi
Cutterbar - cutting width 4 m
13 ft
Number of disks/knifes 8
16
Transport width 4 m
13 ft
Tractor connection 21 spline
Standard hitch Rockshaft swivel
Optional hitch Drawbar swivel
Hydraulic pressure required 15,513 kPa
2,250 psi
Type John Deere
Cutting width 4 m
13 ft
Cutting height 2.0-9.5 cm
0.8-3.8 in.
Number of disks 8
Number of knives 16
Disk speed 2,650 rpm
Knife tip speed 307 km/h
191 mph
Disk drive Gear
Lubrication Hy-Gard oil
Oil reservoir capacity 9.5 L
10 U.S. qt
Cutterbar oil check Combination check, drain plug
Angle adjustment Manual or hydraulic
Angle range 2-8 degree (angle)
Cutterbar protection ShearHub
Adjustable gauge shoes Yes
Width 268 cm
106 in.
Diameter 59.5 cm
23.4 in.
Tines type V-tines
Number of tines 72
Number of speeds Two
Drive 3-V powerband belt and sheaves
Width 279 cm
110 in.
Diameter 25.4 cm
10 in.
Type of material Urethane or Steel
Design Urethane: Recessed cleat, Steel: Intermeshing flutes V-10
Speed 800 rpm
Drive Telescoping shaft
Transport width 4 m
13 ft
Transport length 8.2 m
26.9 ft
Weight, impeller conditioner 2,934 kg
6,470 lb
With Urethane roll conditioner: 2,996 kg
6,605 lb
With V-10 Steel roll conditioner: 3,086 kg
6,805 lb
Standard tires 11L-15 standard
31x13.5L 15, 8PR
Date collected August 24, 2020