Mower-Conditioners | S300 Mower-Conditioner

Equipment
John Deere
#s300_e

Caracteristics

  • Reduce service time with Quick Change Knives
  • Updated design and styling
  • Impeller, urethane or V-10 conditioners
  • Cutting platform is gear-driven

Please note that this product is not available online.
Get pre-approved for financing
SKU: s300_e Categories: , ,

Description

The S300 Mower-Conditioner delivers a fast, clean cut, field after field, season after season.

Specifications

PTO speed 540 or 1000 rpm
1000 rpm 1-3/8 in. PTO 65-150 hp
48-112 kW
Standard hitch Clevis
Optional hitch Equal angle, Rockshaft swivel or Drawbar swivel
Hydraulic pressure required 13,790 kPa
2,000 psi
Cutterbar - cutting width 3 m
9.75 ft
Number of disks/knifes 6
12
Transport width 3 m
9.75 ft
PTO speed 540 rpm
540 rpm PTO 65-81 hp
48-60 kW
Tractor connection 21 spline
Standard hitch Clevis
Optional hitch Equal angle, Rockshaft swivel or Drawbar swivel
Hydraulic pressure required 13,790 kPa
2,000 psi
Type John Deere
Cutting width 3 m
9.75 ft
Cutting height 2.8-9.8 cm
1.1-3.8 in.
Number of disks 6
Number of knives 12
Disk speed 2,650 rpm
Knife tip speed 307 km/h
191 mph
Disk drive Gear
Lubrication Hy-Gard oil
Oil reservoir capacity 7 L
7.4 U.S. qt
Cutterbar oil check Combination check, drain plug
Angle adjustment Manual or hydraulic
Angle range 2-8 degree (angle)
Cutterbar protection ShearHub
Adjustable gauge shoes Yes
Width 185.4 cm
73 in.
Diameter 59.4 cm
23.4 in.
Tines type V-tines
Number of tines 45
Number of speeds Two
Drive 3-V powerband belt and sheaves
Width 187.8 cm
73 in.
Type of material Urethane or steel
Design Urethane: Recessed cleat, Steel: Intermeshing flutes V-10
Speed 664 rpm
Drive Telescoping shaft
Transport width 3 m
9.75 ft
Transport length With equal angle 6.2 m
20.6 ft
Weight, impeller conditioner 2,130 kg
4,696 lb
With Urethane roll conditioner: 2,272 kg
5,012 lb
With Steel roll conditioner: 2,322 kg
5,120 lb
With Impeller conditioner: 2,130 kg
Standard tires 11L-15 standard, 31x13.5L optional
31x13.5L 15 optional
Date collected August 24, 2020