Home / Equipment / Golf Equipment / Fairway Mowers / Fairway Reel Mowers | 6080A PrecisionCut™ Fairway Mower

Fairway Reel Mowers | 6080A PrecisionCut™ Fairway Mower

Name: Fairway Reel Mowers | 6080A PrecisionCut™ Fairway Mower
SKU: 608avtc
Availability: InStock

Fairway Mowers

John Deere

#608avtc

Disclaimer

Caracteristics

24.7 hp FT4 compliant Liquid-Cooled Diesel Engine
18” QA5 Cutting Units for an 80” total Width of Cut
3-wheel, smooth tire configuration with standard GRIP All-Wheel Drive
Passcode-protected TechControl display

Please note that this product is not available online.

Get pre-approved for financing

SKU: 608avtc Categories: Equipment, Fairway Mowers, Golf Equipment

Description

Description

View details for the 6080A PrecisionCut™ Fairway Mower featuring programmable TechControl Display.

Specifications

Maximum rated horsepower	At 3000 rpm: 24.7 hp (18.4 kW) High idle 3200 rpm
Drive pump	Axial piston, electronically controlled hydrostatic traction pump; dual gear pumps for steering, lift, mow, and charge
Ground pressure	69 kPa 10 psi
Throttle	Hand throttle
Operator display	TechControl Display; Located on Command Arm; displays machine warnings, on-board electrical diagnostics; service timers on large easy to read screen; quick on the go settings for mow and transport speed; Turn Speed; Loadmatch™ and ON/OFF Cruise Control Use selection: all settings are pass code protected
Mowing speed	0 to 12.8 km/h 0 to 8.0 mph
Cutting unit size	Quick Adjust QA5: 45.7 cm 18 in.
Total width of cut	203 cm 80 in.
Reel diameter	12.7 cm 5 in.
Frequency of clip (FOC Reels) OR Blade tip speed (decks)	11- Blade: 0.69 mm/km/h 11- Blade: 0.044 in./mph 7-Blade: 1.09 mm/km/h 7-Blade: 0.069 in./mph

Type	Indirect Inject Diesel
Compliant emission regulation	United States and Canada Final Tier 4, EU Stage V
Horsepower	Maximum rated horsepower At 3000 rpm: 24.7 hp (18.4 kW) High idle 3200 rpm
Cylinders	Three
Displacement	1.267 L 77.32 cu in.
Air cleaner	2-stage dry element
Fuel	Diesel Up to B20 compliant
Cooling system	Liquid centrifugal pump; forward machine location for optimum cooling

Drive pump	Axial piston, electronically controlled hydrostatic traction pump; dual gear pumps for steering, lift, mow, and charge
Hydraulic system capacity	37.8 L 10 U.S. gal.
Fuel tank capacity	45.4 L 12 U.S. gal.
Steering	Hydraulic power with double acting steering cylinder
Front drive tires	24x13-12 smooth
Steering tires	24x13-12 smooth
Ground pressure	69 kPa 10 psi
Brakes	Internal hydraulic wet disc brakes with dynamic braking through closed loop hydrostatic system
ROPS	Standard; meets ISO 21299 Standard

Cutting units lowered

1046 kg
2301 lb
Canopy, FTCs and Power Brushes installed, full fuel

Throttle	Hand throttle
Forward/reverse	2-pedal electronic control of eHydro system
Mower lift	One-touch single handle
Parking brake	Electric Switch on Command Arm for Internal Wet Disk Brakes
Seat	Suspension seat with seat belts and arm rest; fore/aft adjustment; weight and lumbar adjustment
PTO	Electric Switch on Command Arm
Tilt steering	Left Foot operated for easy adjustment
Operator display	TechControl Display; Located on Command Arm; displays machine warnings, on-board electrical diagnostics; service timers on large easy to read screen; quick on the go settings for mow and transport speed; Turn Speed; Loadmatch™ and ON/OFF Cruise Control Use selection: all settings are pass code protected
Storage	Cup holder; two-way radio; large operator storage located on left hand side of operator station

Height with ROPS	215.3 cm 84.8 in.
Length	305 cm 120.1 in.
Transport width	232 cm 91.3 in.
Mowing position width	233 cm 91.7 in.
Ground speed	Mowing 0 to 12.8 km/h 0 to 8.0 mph 4WD mow speed N/A Transport 0 to 16.1 km/h 0 to 10.0 mph Reverse 0 to 9.7 km/h 0 to 6.0 mph

Number	Five
Size	Quick Adjust QA5: 45.7 cm 18 in.
Total width of cut	203 cm 80 in.
Height of cut	Construction 2.0 to 28.5 mm 0.078 to 1.125 in.
Frequency of clip (FOC Reels) OR Blade tip speed (decks)	Rollers Front and rear: 50.8 mm 2 in. Optional Front : 76.2 mm 3 in. At 2200 reel speed (engine high idle) - 11- Blade: 0.69 mm/km/h 11- Blade: 0.044 in./mph 7-Blade: 1.09 mm/km/h 7-Blade: 0.069 in./mph
Reel diameter	12.7 cm 5 in.

Measuring standard	ISO 11201
Attachments installed	FTCs, reels engaged

Type	Two-year limited

Type	ANSI B71.4-2012

Financing offers on new equipment are valid until July 31, 2024. Financing offers on used equipment are valid until May 31, 2024. All offers are subject to approval by John Deere Financial and to change without notice. JLD-Laguë makes every effort to ensure the accuracy of the information contained on its Online Boutique and product sheets but is not responsible for any errors or omissions as to the accuracy, reliability, currency or completeness of product descriptions or other information provided on its Online Boutique. Prices advertised are subject to change without notice, images are for illustrative purposes only, details may vary and JLD-Laguë reserves the right to substitute products and to change prices and descriptions advertised or displayed on any of its Online Store, at any time and without notice or obligation to you. Please double-check information with your parts team. JLD-Laguë may, at its sole discretion, accept or refuse any order placed through its Online Boutique. JLD-Laguë may, at its sole discretion, cancel an order placed by you on its Online Boutique after it has been accepted, in which case you will be notified at the contact information provided. If JLD-Laguë cancels your order, JLD-Laguë will not be held in no way to carry out it and will not have any responsibility with regard to it towards you, and you will not be held to pay it. In certain circumstances, JLD-Laguë may require additional information or verification before accepting or fulfilling an order, in which case you will be notified at the contact information provided. Prices shown do not include taxes, preparation charges or shipping, unless otherwise indicated. Delivery is available for certain products only. Delivery is not available on the online ordering system for implements, small equipment and lawn tractors. If your equipment is not available at your branch, an inter-branches freight charge may apply. Contact your local branch to find out more about inter-branches freight charges and delivery options.

Fairway Reel Mowers | 6080A PrecisionCut™ Fairway Mower

Caracteristics

Request a quote

Description

Specifications

Related products

Sprayers | 600R Dry Spinner Spreader

Nutrient Application | 2510H High-Speed Applicator with Dry Nutrient Attachment

2530L Nutrient Applicator | Sprayers and Applicators

Sprayers | STS 12 Hagie™ Self-Propelled Sprayer

Disclaimer