2400 PrecisionCut™ Gas Triplex Mower | Riding Greens Mowers

Reel Mowers
John Deere
#2400XTC

Disclaimer |

Characteristics

  • Greatly reduce triplex ring with exclusive offset cutting units
  • Save time with Quick Adjust Cutting Units
  • Exceptional contour-following and steering of cutting units in turns
  • On-board diagnostics

Note that this product is available in store only.
Get pre-approved for financing
SKU: 2400XTC Categories: , ,

Description

John Deere 2400 PrecisionCut Riding Greens Mowers offer exclusive features to help you consistently achieve a flawless finish.

Specifications

Number of cylinders Two
Displacement 694 cc
42.4 cu in.
Mowing speed Adjustable mow stop: 0-7.1 km/h
0-4.4 mph
Traction drive Hydrostatic, two-pedal control
Mowing position width 157.5 cm
62 in.
Cutting unit size, in. (cm) Quick Adjust QA5 floating: 55.9 cm
22 in.
Clip frequency For 14 blade: 0.541 mm/km/h
0.034 in./mph
With 11-blade reel: 0.689 mm/km/h
0.044 in./mph
With 7-blade reel: 1.082 mm/km/h
0.069 in./mph
Height of cut With 51-mm (2-in.) front roller: 2.0-19.0 mm
0.078-0.75 in.
With 76 -mm (3-in.) fromt roller: 16-32 mm
0.625-1.25 in.
Number of blades 7, 11, or 14 blades
Operator ear 80 dBA
Type Gas model
KOHLER® ECH630 EFI gas with electronic throttle body
Horsepower Gas horsepower
At 3600 rpm: 14.2 kW
19 hp
Engine manufacturer gross power, tested in accordance with SAE J1940 / J1995
Air cleaner Foam precleaner with paper element
Cooling Oil filter
Full-flow filter
Engine oil capacity
With filter: 1.9 L
2 U.S. qt
Pressurized lubrication system
Standard
Number of cylinders
Two
Displacement
694 cc
42.4 cu in.
Air
Charging system Flywheel, alternator
Alternator capacity 16 amp
Ignition Capacitor discharge ignition (CDI)
Battery type BCI group 40 maintenance-free: 12 V
Starter Electric (solenoid shift)
Wheels and tires Front/rear
18x10.5-10, 2-ply, smooth (low compaction)
20x10-10, 2-ply or 4-ply, smooth
or 20x10-10, 2-ply, turf
Brakes
Single-pedal, 2-wheel disc brakes
Mowing speed Adjustable mow stop: 0-7.1 km/h
0-4.4 mph
Transport speed 0-12.9 km/h
0-8 mph
Reverse speed 0-4.8 km/h
0-3 mph
Ground clearance with catcher 10.2 cm
4 in.
Fuel tank capacity In a single tank: 29.5 L
7.8 U.S. gal.
Muffler Horizontal discharge below frame
Hydrostatic drive system capacity 28.8 L
7.6 U.S. gal.
Hydraulic reservoir capacity (only) 20.4 L
5.4 U.S. gal.
Ground drive, reel drive Drive wheels
Front
Traction drive
Hydrostatic, two-pedal control
Reel drive
Hydraulic
Pump Three-section gear
Reel control valves Electrohydraulic, one valve reel on-off and one valve raise-lower
Filtration 10-micron
Steering Hydrostatic, adjustable steering column
Reel drive and reel lift Right-hand operated (optional foot-lift controls)
Throttle Right hand
Park brake Right foot
Hydrostatic speed control Forward
Right foot
Reverse
Right foot
Ignition Key start and shutoff
Engine oil pressure Light-emitting diode (LED) warning light
Alternator LED warning light
Hydraulic oil temperature LED warning light
Engine coolant temperature LED warning light
Hourmeter Digital
Wheelbase 129.5 cm
51 in.
Tread width 101.5 cm
40 in.
Mowing position width 157.5 cm
62 in.
Turning radius, uncut circle 45.7 cm
18 in.
Weight (full fluids, no operator or fuel) 559.2 kg
1233 lb
Height With ROPS: 195.6 cm
77 in.
Number Three - offset design
Size, in. (cm) QA5 floating: 55.9 cm
22 in.
Backlapping Standard on-board micro-backlapping and reel speed control
Clip frequency For 14 blade: 0.541 mm/km/h
0.034 in./mph
With 11-blade reel: 0.689
0.044 in./mph
With 7-blade reel: 1.082 mm/km/h
0.069 in./mph
Front rollers Optional smooth, grooved, or spiral: 5.1 cm
2 in.
Reel diameter 12.7 cm
5 in.
Bedknife adjustment Bedknife-to-reel
Height of cut With 51-mm (2-in.) front roller: 2.0-19.0 mm
0.078-0.75 in.
With 76 -mm (3-in.) fromt roller: 16-32 mm
0.625-1.25 in.
Number of blades 7, 11, or 14 blades
Mower lift One cylinder for front two units; one cylinder for rear unit
Reel speed Adjustable
Number ANSI B71.4-2017
ROPS Two-post SAE J21294 rollover protective structure with seat belts meets ISO 21299 standards
Engine Meets CARB and EPA
Operator ear 80 dBA
Measuring standard ISO 11201
Attachments installed Greens Tender™ conditioners and power brushes, reels engaged
Date collected 11-Feb-2020