180SL SL PrecisionCut™ | Walk Greens Mowers

Walk Greens Mowers
John Deere
#180sam

Disclaimer |

Characteristics

  • Standard operator-presence system
  • Rubber isolators for reduced vibration
  • Long life, reduced maintenance, and superior toughness
  • Easily accessible bedknife-to-reel adjustment

Note that this product is available in store only.
Get pre-approved for financing
SKU: 180sam Categories: , ,

Description

View features and specifications for the 180SL PrecisionCut Walk Greens Mowers.

Specifications

Engine Type Air-cooled, Gas
Horsepower At 3600 rpm: 2.4 kW
3.2 hp
Engine manufacturer net power, tested in accordance with SAE J1349. The engine horsepower and torque information are provided by the engine manufacturer to be used for comparison purposes only. Actual operating horsepower and torque will be less. Refer to the engine manufacturer’s website for additional information.
Cutting width 45.7 cm
18 in.
Frequency of clip standard 11 Blade 4.62 14 Blade, Optional Speed up kit 11 blade, 14 blade: 3.94 mm
0.182 in.
Optional Speed up kit 11 blade, 14 blade: 3.94 mm
0.155 in.
Reel diameter, in. (mm) 127 mm
5 in.
Number of blades 11 or 14 blades through parts
Traction drum Dual, aluminum
Forward speed With transport wheels at 3000 engine rpm: 7.2 km/h
4.6 mph
Weight (less GTC's, gear drive and transport wheel, with catcher) 92.7 kg
204 lb
Operator ear 82 dBA
Type Air-cooled, Gas
Cycle 4-cycle
Bore and stroke 60x42 mm
2.36x1.65 in.
Piston displacement 122 cc
7.4
Compression ratio 8:5:1
Horsepower At 3600 rpm: 2.4 kW
3.2 hp
Engine manufacturer net power, tested in accordance with SAE J1349. The engine horsepower and torque information are provided by the engine manufacturer to be used for comparison purposes only. Actual operating horsepower and torque will be less. Refer to the engine manufacturer’s website for additional information.
Direction of rotation of output shaft Counterclockwise viewed from shaft side
Inclination limit Tilted up to 20 degrees in any direction
Idle speed at output shaft 1600 (+/- 100) rpm
Maximum speed at output shaft 2950 (+/- 150) rpm
Type Regular grade unleaded or leaded
Tank capacity 2.5 L
0.66 U.S. gal.
Type SAE 30 or SAE 10W-30
Capacity 0.6 L
0.63 U.S. qt
Differential drive capacity 0.14 L
0.3 U.S. qt
Cutting width 45.7 cm
18 in.
Cutting height (minimum) Standard - 3.0 mm bedknife
Min. 3.2 mm
0.125 in.
Max. 22 mm
0.875
option
Optional - 2.5 mm bedknife
Min 2.5 mm
0.098 in.
Max. 22
0.875 in.
option
Optional - 2.0 mm bedknife
Min 2.0 mm
0.078 in.
Max. 22 mm
0.875 in.
standard
Frequency of clip standard 11 Blade 4.62 14 Blade, Optional Speed up kit 11 blade, 14 blade: 3.94 mm
0.182 in.
Optional Speed up kit 11 blade, 14 blade: 3.94 mm
0.155 in.
Diameter, in. (mm) 127 mm
5 in.
Number of blades 11 or 14 blades through parts
Material Heat-treated chromium molydenum steel
Brush Interlocked with reel, rotation in reverse direction; 2-3/8-in. (60-mm) diameter nylon
Vertical cutter blades Specially hardened carbon tool steel; star shaped; 2-3/8-in. (60-mm) diameter, 60 blades
Adjustable brush or cutter height Brush even with height-of-cut; GTC below height-of-cut maximum: 0.8 mm
0.0313 in.
Gear drive Gear driven from reel shaft, opposite direction of reel, rotation powers brush or vertical cutter
Size 2.7 kg
6 lb
Type Polyethylene
Transport Belt tension
Reel jaw-type clutch On/off
Brush/GTC jaw-type clutch On/off
Traction drum Dual, aluminum
Forward speed With transport wheels at 3000 engine rpm: 7.2 km/h
4.5 mph
Roller (rear) Aluminum, diameter: 190 mm
7.5 in.
Roller (front) (grooved or smooth) Machined steel, diameter: 50 mm
2 in.
for cutting height adjustment
Length (w/tires installed) 940 mm
37 in.
Width (w/tires installed) 84.5 cm
33.3 in.
Height (w/tires installed) 119 cm
47 in.
Weight (less GTC's, gear drive and transport wheel, with catcher) 92.7 kg
204 lb
Operator ear 82 dBA
Measuring standard ISO 11201
Attachments installed GTCs, reels engaged
Type ANSI B71.4-2004