5090GN |Specialty Tractors

Specialty Tractors
John Deere
#5090gat

Disclaimer |

Characteristics

  • Working widths down to 43 inches
  • Improved turning radius on the 5GN Series
  • FT4 90 hp engine/76 hp PTO
  • Two transmissions available: 12F/12R and 24F/12R

Note that this product is available in store only.
Get pre-approved for financing
SKU: 5090gat Categories: , ,

Description

The 5090GN have enough of what it takes to get the job done whether you’re working in the vineyard, vegetable farm or orchard.

Specifications

Engine description 3.4L Fiat® Powertrain Technologies
Engine displacement 4 cylinder: 3.4 L
207 cu in.
Rated engine power 67.1 kW
90 hp
Rated PTO power (hp SAE) 59 kW
79 hp
Transmission type 24F/12R PowrReverser, EH Hi-Lo
Hydraulic pump rated output Standard: 96.5 L/min
25.5 gpm
Optional: 126.4 L/min
33.4 gpm
Rear hitch category (SAE designation) Category 1/Category 1N
Base machine weight OOS: 2529.7 kg
5577 lb
Cab: 2744.7 kg
6051 lb
Description 3.4L Fiat® Powertrain Technologies
Engine family FPTF34
Rated speed 2300 rpm
Aspiration Turbocharged
Cylinders liners Wet sleeved
Emission level Final Tier 4
After treatment type Diesel Oxidation Catalyst (DOC) and Selective Catalyst Reduction (SCR)
Displacement 4 cylinder: 3.4 L
207 cu in.
Rated power 67.1 kW
90 hp
Rated PTO power (hp SAE) 59 kW
79 hp
Type 24F/12R PowrReverser, EH Hi-Lo
Reverser Yes
Clutch; wet/dry Wet
Creeper Yes
Type Open Center
Pump rated output Standard: 96.5 L/min
25.5 gpm
Optional: 126.4
33.4 gpm
Available flow at a single rear SCV 41.6 L/min
11 gpm
Number of rear selective control valves (SCVs) Standard: 2
Optional: 4
SCV control Mechanical
Hitch draft control load sense type Mechanical
Hitch category (SAE designation) Category 1/Category 1N
Maximum lift capacity behind lift points 2549 kg
5620 lb
Sensing type Top Link Draft Sensing
Drawbar category Extendable
Type Standard: 540/540E
Engine rpm (at rated PTO speeds) 540 at 1938 rpm
540E at 1648 rpm
PTO actuation Electrohydraulic
Type Carraro Drivetech
Final drive type Three point inboard planetary drives
Differential controls Multi disk oil cooled design
Axle type Flanged
Brakes, type and control Multi-disc rear braking
Rear differential lock Electrohydraulic
Type Carraro Drivetech
Front axle differential lock Self Locking Differential
Front 6.50R16
Rear 260/70 R16
Turning radius without brakes 3627 mm
11.9 ft
Type Dynamic Load Sensing, Hydrostatic, Flow Metering
Alternator size 120 amp
Rollover protective structure, OOS Rigid - foldable - telescopic
Rigid, front folding
Platform - flat/straddle
Straddle
Gearshift location - console/floor
Floor
Yes
Seat OOS: standard: COBO MT SC74 M200
Optional: COBO MT SC74 M97
Cab: standard: COBO MT SC74 M200
dB(A) rating 82
Wheelbase 2098 mm
82.5 in.
Overall length 4319 mm
170 in.
Drawbar clearance Min. 226.1 mm
8.9 in.
Max. 266.7 mm
10.5 in.
Front axle center Min. 226.1 mm
8.9 in.
Max. 266.7 mm
10.5 in.
Base machine weight OOS: 2529.7 kg
5577 lb
Cab: 2744.7 kg
6051 lb
Fuel tank Standard: 73.1 L
19.3 U.S. gal.
Interval for engine oil change 500
Interval for hydraulic/transmission oil change 750