Commercial Mowers | QuikTrak™ Q850R Stand-On Mowers

QuikTrak™ Commercial Stand-On Mowers
John Deere
#850r_tc

Disclaimer |

Characteristics

  • 27-hp (20.1-kW)
  • 54” and 60” 7Iron™ PRO decks
  • Mow up to 19 km/h
  • Warranty: 36 months or 1500 hours, which ever comes first; First 24 months, no hour limitation**

Note that this product is available in store only.
Get pre-approved for financing

Description

John deere, Commercial mowers, commercial mowing, Commercial, Landscaping, commercial landscapers, Stand-on mower, stand on mower, QuikTrak™, QuikTrak, Quick Track,, 7Iron™ PRO, 7Iron™ PRO mower deck, 27 horsepower engine, Foot holds, Foot pegs, foot rests

Specifications

Engine Manufacturer/model FX850V
Engine power Gross at 3,600 rpm: 27 hp
20.1 kW
Fuel tank capacity 12 U.S. gal.
45.3 L
Mower deck size 54-in. (137-cm) 7Iron™ PRO side-discharge
60-in. (152-cm) 7Iron™ PRO side-discharge
Blade tip speed Approximately 18,000 fpm
5486 m/min
Transmission Tuff Torq TZT13 IHT
Speed range 0-12 mph
0-19.3 km/h
Drive wheels 24x12-12 pneumatic
24x12N12 Tweel
Caster wheels 13x5-6
Warranty 36 months or 1500 hours, whichever comes first.
First 24 months, no hour limitation.
Manufacturer/Model FX850V
Power Gross at 3,600 rpm: 27 hp
20.1 kW
Displacement 52.0 cu in.
852 cc
Cylinders Two, V-twin
Crankcase capacity With filter, 2.4 qt
2.3 L
Oil filter Full flow, replaceable
Lubrication Full pressure
Cooling Forced air, with integrated clean out ports and oil cooler
Air cleaner Heavy-duty canister type with safety element
Fuel type Gasoline
Fuel tank capacity 12 U.S. gal.
45.3 L
Fuel tank switch/shut-off valve No
Charge system At 3,600 rpm 20A
Battery voltage 12 V
Cold cranking amp 300 CCA
Hour meter Display panel including hour meter, fuel level, engine speed, system voltage, low engine oil pressure indicator, starting interlock indicators (PTO, operator presence, park brake), caution warning, stop warning, and on-board diagnostics
Operator presence starting system Yes
Transmission Tuff Torq TZT13 IHT
Hydraulic pumps 0.79 cu in.
13 cc
Wheel motors 13 cu in.
213 cc
Travel speed Speed range
0-12 mph
0-19.3 km/h
Forward
Infinite, 0-12 mph
Infinite, 0-19.3 km/h
Reverse
Infinite, 0-6 mph
Infinite, 0-9.7 km/h
Speed and direction control Twin hand-controlled levers
Hydraulic capacity 6.0 U.S qt
5.7 L
Hydraulic oil cooler Two 8.5 in. (22 cm) fans
Filter Two internal and replaceable
Warranty 36 months or 1500 hours, whichever comes first.
First 24 months, no hour limitation.
Drive wheels 24x12-12 pneumatic
24x12N12 Tweel
Load rating 4 PR
Dynamic braking Dual hand-controlled levers
Park brake Internal wet disk
Park brake actuation Hand lever
Type Electro-magnetic with brake, 200 lb-ft
271 Nm
Drive V-belt
Size 54-in. (137-cm) 7Iron™ PRO side-discharge
60-in. (152-cm) 7Iron™ PRO side-discharge
Deck construction 7-Iron™ PRO: one-piece forged steel
Deck thickness 7 gauge
0.180 in.
4.6 mm
Discharge Side
Height-of-cut range Increments
0.25 in.
0.64 cm
1.5-5 in.
3.8-12.7 cm
Cutting width 54-in. (137-cm) 7Iron™ PRO side-discharge
60-in. (152-cm) 7Iron™ PRO side-discharge
Thickness 0.25 in.
0.64 cm
Blade tip speed Approximately 18,000 fpm
5486 m/min
Number Three
Caster wheel type Flat free
Caster wheels 13x5-6
Front anti-scalp rollers RH, center, LH
Length Foot platform up, 70 in.
183 cm
Foot platform down, 74.75 in.
190 cm
Width With chute down, 68, 74 in.
173, 188 cm
Height 49 in.
124 cm
Weight 1135 lb
515 kg (54 in.)
1155 lb
524 kg (60 in.)
Date collected 28-Aug-2023