Description
The 9 Series Tractors are built to defy convention. With more engine horsepower (390 – 640 engine hp) and efficient FT4 engine technology, these machines welcome a good challenge.
Save 10%* on your Christmas gifts with the promo code PROMO10!
Click hereHome / Equipment / Tractors / 4WD and Track Tractors / 9 Series Tractors | 9RX 640
1Engine power PS (hp ISO) at max engine power speed (ECE-R120). John Deere Standard RES10080, SAE Standards J1995.
The 9 Series Tractors are built to defy convention. With more engine horsepower (390 – 640 engine hp) and efficient FT4 engine technology, these machines welcome a good challenge.
| Engine description | JD14 (B20 diesel compatible) |
| Engine displacement |
13.6 L 827 cu in. |
| Rated engine power |
471 kW 640 hp |
| Maximum engine power |
508 kW 691 hp |
| Rated PTO power (hp SAE) |
249 kW 335 hp |
| Transmission type |
John Deere e18™ 18-speed PowerShift™ with Efficiency Manager™: 40 km/h 25 mph |
| Hydraulic pump rated output |
Standard: 208 L/min 55 gpm Optional: 416 L/min 110 gpm |
| Rear hitch category (SAE designation) |
Category 4N/4: 6804 kg 15,000 lb Category 4N/4: 9072 kg 20,000 lb |
| Base machine weight |
25,846 kg 56,981 lb |
| Description | JD14 (B20 diesel compatible) |
| Engine type | In-line six, four valve |
| Engine family | MJDXL13.5334 |
| Rated speed | 2100 rpm |
| Aspiration | Dual series turbocharger with fixed geometry first stage and wastegated second stage; air-to-air aftercooling and cooled exhaust gas recirculation (EGR) |
| Cylinders liners | Wet-sleeve |
| Emission level | Final Tier 4 (FT4) |
| After treatment type | Diesel oxidation catalyst (DOC)/selective catalytic reduction (SCR) |
| Displacement |
13.6 L 827 cu in. |
| Rated power |
471 kW 640 hp |
| Rated PTO power (hp SAE) |
249 kW 335 hp |
| Power boost | 8 percent |
| Maximum engine power |
508 kW 691 hp |
| Engine peak torque |
At 1550 rpm: 2954 Nm 2179 lb-ft |
| PTO torque rise | 38 percent |
| Type |
John Deere e18 18-speed PowerShift with Efficiency Manager: 40 km/h 25 mph |
| Type | Closed-center, pressure-and-flow compensated |
| Pump rated output |
Standard: 208 L/min 58 gpm Optional: 416 L/min 110 gpm |
| Available flow at a single rear SCV |
1.3-cm (1/2-in.) couplers: 132 L/min 35 gpm 1.9-cm (3/4-in.) couplers: 159 L/min 42 gpm |
| Number of rear selective control valves (SCVs) |
Four to eight factory or field installed Base: four 1.3-cm (1/2-in.) couplers Optional: five to six 1.3-cm (1/2-in.) couplers factory installed Optional: three 1.9-cm (3/4-in.) couplers plus five 1.3-cm (1/2-in.) couplers factory installed |
| SCV control | Electronic |
| Hitch category (SAE designation) |
Category 4N/4: 6804 kg 15,000 lb Category 4N/4: 9072 kg 20,000 lb |
| Maximum lift capacity behind lift points |
Category 4N/4: 9072 kg 20,000 lb |
| Sensing type | Electrohydraulic with draft sensing |
| Drawbar category | Category 5 |
| Maximum vertical load |
5440 kg 12,000 lb |
| Type |
Independent 44 mm (1.75 in.) 20-spline, 1000 rpm |
| PTO actuation | Electrohydraulic |
| Final drive type | Bull gear and double idler with floating pinion |
| Rear differential lock | Full-locking electrohydraulic |
| Front axle differential lock | Full-locking electrohydraulic |
| Turning radius with brakes |
With 76.2 cm (30 in.) track and 221 cm (87 in.) spacing: 6.42 m 21.1 ft |
| Tread spacing |
Wide undercarriage: 2218 mm 87 in. 3048 mm 120 in. |
| Drive type | Camso™ 3500 and 6500 Ag Series - reinforced drive lug technology |
| Track width |
Standard: 762 mm 30 in. Optional: 914 mm 36 in. |
| Mid-rollers | Two |
| Type |
Standard: Hydraulic power steering Optional: ActiveCommand Steering (ACS™) |
| Alternator size |
Standard: 250 amp Optional: 330 amp |
| Battery options | 12 V |
| Working lights |
Standard: 18 halogen Optional: 18 or 24 LED plus 8 LED convenience lights |
| Type of bulb in headlight (Halogen, Zenon, LED) |
Standard: halogen, 65 W Optional: LED |
| Total cold cranking amps |
3 x 925 CCA Total: 2775 CCA |
| Seat |
Degree of seat swivel, left hand 25 degree (angle) Degree of seat swivel, right hand 40 degree (angle) |
| Cab suspension | Standard |
| Instructional seat | Standard |
| Display |
Standard: Generation 4 4600 CommandCenter™: 25.4 cm 10 in. Optional: Extended monitor |
| Radio |
Standard: AM/FM stereo with weatherband, remote controls, auxiliary input jack, four speakers and external antenna Optional: Touchscreen radio |
| Inner cab volume |
3.27 m3 115 cu ft |
| Cab glass area |
6.64 m2 71.47 sq ft |
| Wheelbase |
4125 mm 162.4 in. |
| Overall length |
Excluding hitch: 8309 mm 327.1 in. Including hitch and coupler: 8545 mm 336.4 in. |
| Drawbar clearance |
311 mm 12.2 in. |
| Approximate shipping weight, Open;Cab |
25,546 kg 56,320 lb |
| Base machine weight |
25,846 kg 56,981 lb |
| Maximum ballast level |
30,391 kg 67,000 lb |
| Crankcase oil volume |
64 L 16.9 U.S. gal. |
| Fuel tank |
1514 L 400 U.S. gal. |
| Diesel exhaust fluid (DEF) tank |
120 L 31.7 U.S. gal. |
| Cooling system |
56.5 L 14.9 U.S. gal. |
| Transmission-hydraulic system |
With 3-point hitch and PTO: 227 L 60 U.S. gal. Without 3-point hitch and PTO: 220 L 58 U.S. gal. |
| Interval for engine oil change | 500 hours |
| Interval for hydraulic/transmission oil change | 1500 hours |
| Interval for engine coolant change | 6000 hours |
| Guidance | Integrated AutoTrac™ |
| Telematic | Available with JDLink™ hardware, activations, and Ethernet harnesses (availability dependent upon destination) |
| Remote diagnostics | Available with activated JDLink hardware and activations |
| Country of manufacture | USA |
| Date collected | 22 January 2022 |