Description
3025D is an economical Gear Transmission tractor.
Home / Equipment / Tractors / 3 Series Compact Tractors / 3 Series Compact Tractors | 3025D
3025D is an economical Gear Transmission tractor.
Engine power (gross) |
SAE J1995 rated power: 18.2 kW 24.4 hp 24.7 PS at 2400 rpm |
Power take-off (PTO) power |
15.4 kW 20.7 hp |
Steering hydraulics |
14.4 L/min 3.8 gpm |
Implement hydraulics |
19.2 L/min 5.1 gpm |
Hitch type | Category 1 |
Lift capacity, 24-in. behind link arms |
944 kg 2081.2 lb |
Standard transmission; forward/reverse | 8F/8R synchromesh shuttle shift gear transmission |
Cruise control | No |
Approximate shipping weight (open-station; cab) |
Open operator station (OOS): 1260 kg 2778 lb Cab: Not applicable |
Wheelbase |
1574 mm 62 in. |
Manufacturer | Yanmar® |
Engine model | 3TNV88F-EPJPT |
Engine power (gross) |
SAE J1995 rated power: 18.2 kW 24.4 hp 24.7 PS at 2400 rpm |
Power take-off (PTO) power |
15.4 kW 20.7 hp |
Rated engine speed | 2400 rpm |
Injection pump type | Direct injection |
Aspiration | Natural |
Emissions compliance | Final Tier 4 |
Cylinders/displacement |
3 / 1.64 L 3 / 100.2 cu in. |
Number of cylinders | Three |
Cylinder liners | Cast-in-block |
Bore and stroke |
88 x 90 mm 3.46 x 3.54 in. |
Compression ratio | 19.1:1 |
Lubrication | Pressurized |
Cooling system | Liquid |
Air cleaner | Dual element |
Engine torque at rated speed |
72.4 Nm 53.4 lb-ft |
Fuel tank capacity |
36.7 L 9.7 U.S. gal. |
Battery size | 600 CCA |
Alternator (12-V) | 55 amp |
Starter size |
1.4 kW 1.9 hp |
Type | Direct injection |
Standard transmission; forward/reverse | 8F/8R synchromesh shuttle shift gear transmission |
Left-hand reverser | Yes |
Transmission gear ranges | Four gears and two ranges |
Final drive | Spur gear |
Brakes | Wet disk |
Steering | Power steering |
Axle capacity |
Front 880 kg 1940 lb Rear 1600 kg 3527 lb |
Creeper | No |
Cruise control | No |
Differential lock | Yes |
Type | Open center |
Pump rated output |
Steering 14.4 L/min 3.8 gpm Implement 19.2 L/min 5.1 gpm 33.6 L/min 8.9 gpm |
Pump type | Single gear |
Maximum operating pressure |
172 bar 2495 psi |
Draft control sensing | Position control |
Remote control valves available | Up to two (optional) |
Type | Category 1 |
Lift capacity, 24-in. behind link arms |
944 kg 2081.2 lb |
Standard | At 2400 rpm: 540 rpm |
Control | Mechanical |
Clutch | Transmission |
Brake (for mid and rear PTO) | Wet disk |
Crankcase with filter |
4.5 L 4.8 gal. |
Transmission and hydraulic system |
33 L 34.8 qt |
Type | Spur gear |
Rollover protective structure |
Type Foldable ASABE S478 |
Platform - flat/straddle | Straddle |
Gear shift location - console/floor | Right-hand side |
Wheelbase |
1574 mm 62 in. |
Front axle clearance |
Minimum: 331 mm 13 in. Maximum: 353 mm 13.9 in. |
Turning radius with brakes |
1.63 m 5.3 ft |
Approximate shipping weight (open-station; cab) |
OOS: 1260 kg 2778 lb Cab: Not applicable |
Front |
R1 Bar: 7-14 R3 Turf: 27x8.5-15 R4 Industrial: 25x8.5-14 |
Rear |
R1 Bar: 11.2-24 R3 Turf: 41x14-20 R4 Industrial: 15-19.5 |
Toolbox | Yes |
Tilt steering wheel | No |
12-V Outlet | No |