3 Series Compact Tractors | 3035D

3 Series Compact Tractors
John Deere
#3035dlv

Disclaimer |

Characteristics

  • Standard 4WD for Maximum Traction
  • Heavy duty drive train with a gear drive transmission 8F/8R
  • Category 1 3-Pt Hitch compatible with dozens of attachments

For pricing and additional discounts, see your local John Deere Dealer.

Note that this product is available in store only.
Get pre-approved for financing
SKU: 3035dlv Categories: , ,

Description

3035D Compact Tractors is an economical tractor with Gear Transmission.

Specifications

Engine power (gross) SAE J1995 rated power: 25.5 kW
34.2 hp
34.7 PS at 2800 rpm
Power take-off (PTO) power 22.7 kW
30.4 hp
Steering hydraulics 16.8 L/min
4.4 gpm
Implement hydraulics 22.4 L/min
5.9 gpm
Hitch type Category 1
Lift capacity, 24-in. behind link arms 944 kg
2081.2 lb
Standard transmission; forward/reverse 8F/8R synchromesh shuttle shift gear transmission
Cruise control No
Approximate shipping weight (open-station; cab) Open operator station (OOS): 1275 kg
2811 lb
Cab: Not applicable
Wheelbase 1574 mm
62 in.
Manufacturer Yanmar®
Engine model 3TNV88C-KJPT
Engine power (gross) SAE J1995 rated power: 25.5 kW
34.2 hp
34.7 PS at 2800 rpm
Power take-off (PTO) power 22.7 kW
30.4 hp
Rated engine speed 2800 rpm
Injection pump type High pressure common rail direct injection
Aspiration Natural
Emissions compliance Final Tier 4
Cylinders/displacement 3 / 1.64 L
3 / 100.2 cu in.
Number of cylinders Three
Cylinder liners Cast-in-block
Bore and stroke 88 x 90 mm
3.46 x 3.54 in.
Compression ratio 19.1:1
Lubrication Pressurized
Cooling system Liquid
Air cleaner Dual element
Engine torque at rated speed 87 Nm
64.2 lb-ft
Fuel tank capacity 36.7 L
9.7 U.S. gal.
Battery size 600 CCA
Alternator (12-V) 55 amp
Starter size 1.4 kW
1.9 hp
Type High pressure common rail direct injection
Standard transmission; forward/reverse 8F/8R synchromesh shuttle shift gear transmission
Left-hand reverser Yes
Transmission gear ranges Four gears and two ranges
Final drive Spur gear
Brakes Wet disk
Steering Power steering
Axle capacity Front
880 kg
1940 lb
Rear
1600 kg
3527 lb
Creeper No
Cruise control No
Differential lock Yes
Type Open center
Pump rated output Steering
16.8 L/min
4.4 gpm
Implement
22.4 L/min
5.9 gpm
39.2 L/min
10.3 gpm
Pump type Single gear
Maximum operating pressure 172 bar
2495 psi
Draft control sensing Position control
Remote control valves available Up to two (optional)
Type Category 1
Lift capacity, 24-in. behind link arms 944 kg
2081.2 lb
Standard At 2400 rpm: 540 rpm
Control Mechanical
Clutch Transmission
Brake (for mid and rear PTO) Wet disk
Crankcase with filter 4.5 L
4.8 gal.
Transmission and hydraulic system 33 L
34.8 qt
Type Spur gear
Rollover protective structure Type
Foldable
ASABE S478
Platform - flat/straddle Straddle
Gear shift location - console/floor Right-hand side
Wheelbase 1574 mm
62 in.
Front axle clearance Minimum: 331 mm
13 in.
Maximum: 353 mm
13.9 in.
Turning radius with brakes 1.63 m
5.3 ft
Approximate shipping weight (open-station; cab) OOS: 1275 kg
2811 lb
Cab: Not applicable
Front R1 Bar: 7-14
R3 Turf: 27x8.5-15
R4 Industrial: 25x8.5-14
Rear R1 Bar: 11.2-24
R3 Turf: 41x14-20
R4 Industrial: 15-19.5
Toolbox Yes
Tilt steering wheel No
12-V Outlet No