Description
The 6105E offers an easy-to-use, value-spec utility tractor that was built to deliver versatility, fluid economy and a low-cost of operation to no-nonsense operations.
Home / Equipment / Tractors / 6 Series Utility Tractors /
6E Series Utility Tractors | 6105E
6 Series Utility TractorsJohn Deere
#6105ep
Characteristics
- Engine HP: 106 Max | 105 Rated
- John Deere FT4 PowerTech™ engine combines performance and fluid economy
- 12/12 or 24/12 hi-lo PowrReverser™ transmission
- Cab, open station, 2WD or MFWD
- 15 degrees of seat swivel with optional air-ride seat
Specifications
| Engine description | John Deere PowerTech™ PWL (B20 Diesel Compatible) |
| Engine displacement |
4.5 L 275 cu in. |
| Rated engine power |
97/68EC: 77 kW 105 engine hp |
| Rated PTO power (hp SAE) |
66 kW 89 PTO hp |
| Transmission type |
Standard: John Deere 12F/12R PowrReverser™ Transmission: 30 km/h 19 mph Optional: John Deere 24F/12R PowrReverser Transmission: 40 km/h 25 mph |
| Hydraulic pump rated output |
36.5 cc pump: 75.7 L/min 20 gpm |
| Rear hitch category (SAE designation) |
Category 2: 2500 kg (5500 lb) standard lift at 610 mm behind hitchpoint Optional: Category 2: 3318 kg (7300 lb) heavy duty lift at 610 mm behind hitchpoint |
| Description | John Deere PowerTech™ PWL (B20 Diesel Compatible) |
| Engine type | Diesel, in-line, 4-cylinders, wet-sleever cylinder lingers with 4 valves-in-head |
| Engine family | HJDXL04.5315 |
| Rated speed | 2200 rpm |
| Aspiration | Turbocharged, wastegate turbocharger with air-to-air aftercooling and cooled exhaust gas recirculation |
| Emission level | Final Tier 4 |
| After treatment type | DOC/DPF/SCR |
| Displacement |
4.5 L 275 cu in. |
| Rated power |
97/68EC: 77 kW 105 engine hp |
| Rated PTO power (hp SAE) |
66 kW 89 PTO hp |
| Engine peak torque |
At 1,600 rpm: 432 Nm 318 lb-ft |
| PTO torque rise | 30 percent |
| Type |
Standard: John Deere 12F/12R PowrReverser™ Transmission: 30 km/h 19 mph Optional: John Deere 24F/12R PowrReverser Transmission: 40 km/h 25 mph |
| Type |
Open-center Gear driven |
| Pump rated output |
36.5 cc pump: 75.7 L/min 20 gpm |
| Available flow at a single rear SCV |
75.7 L/min 20 gpm |
| Number of rear selective control valves (SCVs) |
Standard: ISO Couplers: 2 Optional: ISO Couplers 3 |
| SCV control | Mechanical |
| Hitch category (SAE designation) |
Category 2: 2500 kg (5500 lb) standard lift at 610 mm behind hitchpoint Optional: Category 2: 3318 kg (7300 lb) heavy duty lift at 610 mm behind hitchpoint |
| Maximum lift capacity behind lift points |
Standard: Category 2 with heavy duty lift: 3318 kg 7300 lb |
| Sensing type | Optional |
| Drawbar category |
Standard: Category 2 Optional: Category 2 heavy duty |
| Maximum vertical load |
Standard: Category 2 1000-1250 kg 2205-2756 lb Optional: Category 2 heavy duty: 1200-1900 kg 2645-4189 lb Maximum vertical load dependent on drawbar position |
| Type |
Independent Standard: 35 mm (1.375 in.) 540 rpm/1000 rpm reversible shaft |
| Engine rpm (at rated PTO speeds) |
2085 engine rpm at 540 rpm PTO 2067 engine rpm at 1000 rpm PTO |
| Type | Flange |
| Final drive type | Inboard Planetary |
| Rear differential lock | Full-locking mechanical |
| Type |
Standard: MFWD Optional: 2WD |
| Front axle differential lock |
2WD: None MFWD: limited slip |
| Wheel tread range |
2WD: 1533-2043 mm 60.4-80.4 in. MFWD: 1516-2016 mm 59.7-79.4 in. |
| Type | Standard: Hydrostatic power |
| Alternator size | 90 amp |
| Battery options | 12 V |
| Total cold cranking amps | 925 CCA |
| Seat |
Standard: Mechanical suspension cloth seat Optional: Air suspension |
| Instructional seat | Optional |
| Display | LCD instrument cluster |
| Wheelbase |
2WD: 2456 mm 96.7 in. MFWD: 2450 mm 96.5 in. |
| Approximate shipping weight, Open;Cab |
2WD: Open: 4064 kg 8960 lb MFWD: Open: 4268 kg 9410 lb Cab: 4645 kg 10,240 lb |
| Maximum ballast level |
6464 kg 14250 lb |
| Crankcase oil volume |
15 L 4 U.S. gal. |
| Fuel tank |
168 L 44.4 U.S. gal. |
| Cooling system |
Open station: 18.6 L 4.7 U.S. gal. Cab: 19.1 L 5 U.S. gal. |
| Transmission-hydraulic system |
58 L 15.3 U.S. gal. |
| Interval for engine oil change | 500 hours |
| Interval for hydraulic/transmission oil change | 1,000 hours |
| Interval for engine coolant change | 5,000 hours |
| Country of manufacture | Mexico |
| Date collected | 9-Feb-17 |
Related products
-
Nutrient Application | 2510H High-Speed Applicator with Dry Nutrient Attachment
EquipmentMore details -
Tillage | 2230LL Level-Lift™ Field Cultivator
EquipmentMore details -
Residential Snow Removal
Snowblower 22 in, Track Drive ES
EquipmentCA$2,874.00Year: 2022
More details -
Nutrient Application Equipment | 2510L Liquid Fertilizer Applicator
EquipmentMore details