Description
Transport tractor with high power density for quick acceleration.
6 Series Tractors | 6R 230
TractorsJohn Deere
#6230_rl
Characteristics
- John Deere FT PowerTech™ 6-cylinder engines
- Engine HP: 253 HP Max 230/HP Rated with up to 40 additional HP (IPM)
- IVT transmission for seamless power transfer
- Optional CommandPRO™ puts tractor and implement control at your fingertips
Specifications
| Engine displacement |
6.8 L 415 cu in. |
| Maximum engine power |
137 kW 184 hp |
| Rated engine power PS (hp ISO) at rated engine speed (EU 2016/1628) |
97/68EC: 169 kW 230 hp |
| Maximum engine power PS (hp ISO) at max engine speed (EU 2016/1628) |
97/68EC: 186 kW 253 hp |
| Hydraulic pump rated output |
Standard: 85 cc pump: 160 L/min 42 gpm |
| Rear hitch category (SAE designation) |
Category 3/3N: 7000 kg 15,432 lb |
| Base machine weight |
9300 kg 20,503 lb |
| Engine type | Diesel, in-line, 6-cylinder, wet-sleeve cylinder liners with four valves in head |
| Engine family | NJDXL06.8324 |
| Rated speed | 2100 rpm |
| Aspiration | Turbocharged, variable geometry and fixed turbocharger with air-to-air aftercooling and cooled exhaust gas recirculation |
| Emission level | Final Tier 4 |
| After treatment type | DOC/DPF/SCR |
| Displacement |
6.8 L 415 cu in. |
| Rated engine power PS (hp ISO) at rated engine speed (EU 2016/1628) |
97/68EC: 169 kW 230 hp |
| Rated PTO power (hp SAE) |
137 kW 184 hp |
| Intelligent Power Management (IPM) |
Transport and/or mobile PTO applications Additional engine power (hp ISO) at 2100 rpm: 29.8 kW 40 hp |
| Power boost | 10 percent |
| Maximum engine power PS (hp ISO) at max engine speed (EU 2016/1628) |
97/68EC: 186 kW 253 hp |
| Engine peak torque |
At 1,600 rpm: 1074 Nm 792 lb-ft |
| PTO torque rise | 40 percent |
| Reverser | Left-hand electrical reverser |
| Type | Closed-center, pressure-and-flow compensated |
| Pump rated output |
Standard: 85 cc pump: 160 L/min 42 gpm |
| Available flow at a single rear SCV |
116 L/min 30.6 gpm |
| Number of rear selective control valves (SCVs) |
Standard: Three ISO couplers Optional: Three to six ISO couplers |
| Number of mid selective control valves (SCVs) | Up to three |
| Joystick SCV control | Available |
| SCV control | Standard: Electronic |
| Remote control valves available | Available: Remote control switch |
| Hitch category (SAE designation) |
Category 3/3N: 7000 kg 15,432 lb |
| Maximum lift capacity behind lift points |
7000 kg 15,432 lb |
| Sensing type | Electrohydraulic |
| Rear axle differential lock | Electrohydraulic |
| Drawbar category | Category 3 |
| Maximum vertical load |
Category 3: 1600-2800 kg 3527-6172 lb Maximum vertical load dependent on drawbar position |
| Type |
Independent Standard: 540E, 1000, 1000E rpm reversible shaft: 35 mm 1.375 in. Optional: 540, 540E, 1000 rpm reversible shaft: 35 mm 1.375 in. |
| Engine rpm (at rated PTO speeds) |
1950 engine rpm at 540/1000 rpm PTO 1761 engine rpm at 540E rpm PTO 1756 engine rpm at 1000E rpm PTO |
| PTO actuation | Electrical modulation |
| Category | Category 3N |
| Electric power |
Seven-pin electrical socket Optional: Three-pin and ISOBUS socket |
| Standard lift capacity |
At hook ends: 3300 kg 7275 lb |
| Front power take-off (PTO) | 1000 rpm, clockwise rotation (from driving position) |
| PTO speed | Engine at PTO speed (1000): 1965 rpm |
| Type |
Standard: Flange, 1892 mm 74.5 in. Optional: Rack and pinion, 2550 mm 100.4 in. Rack and pinion, 3009 mm 118.5 in. |
| Final drive type | Inboard planetary three pinion |
| Differential controls | Full-locking electrohydraulic |
| Front axle differential lock |
TLS: Limited slip TLS with brakes: Full-locking electrohydraulic |
| Rear | 520/85R42 R1W |
| Wheel tread range |
MFWD: With TLS and brakes: 2370 in. 93.3 in. |
| Type | Hydrostatic power |
| Alternator size | Standard: 250 amp |
| Battery options | 12 V |
| Working lights |
Standard: 14 halogen Optional: 12 light-emitting diode (LED) plus two halogen |
| Type of bulb in headlight (Halogen, Zenon, LED) |
Standard: Halogen, 65 W W Optional: LED |
| Total cold cranking amps | 1850 CCA |
| Seat |
Degree of seat swivel, left hand 7.5 degree Degree of seat swivel, right hand 30 degree Standard: Air suspension Optional: Deluxe air suspension |
| Cab suspension | Optional: Adaptive Hydraulic Cab Suspension Plus (HCS Plus) |
| Instructional seat | Standard |
| Radio | Standard |
| Inner cab volume |
3.33 m3 117.59 cu ft |
| dB(A) rating | 71 dB |
| Cab glass area |
6.11 m2 65.77 sq ft |
| Wheelbase |
2900 mm 114 in. |
| Overall width |
1892 mm 74.5 in. |
| Overall length |
5050 mm 198.8 in. |
| Overall height |
3160 mm 124.4 in. |
| Front axle center |
588 mm 23.1 in. |
| Approximate shipping weight, Open;Cab |
9300 kg 20,503 lb |
| Base machine weight |
Front axle 3700 kg 8157 lb Rear axle 5600 kg 12,345 lb Total 9300 kg 21,100 lb 9300 kg 20,503 lb |
| Maximum permissible weight |
Flange axle: 15,000 kg 33,000 lb Rack-and-pinion axle: 13,450 kg 29,652 lb |
| Crankcase oil volume |
23.5 L 6.2 U.S. gal. |
| Fuel tank |
Standard: 410 L 108.3 U.S. gal. |
| Diesel exhaust fluid (DEF) tank |
25 L 6.6 U.S. gal. |
| Cooling system |
29.4 L 7.7 U.S. gal. |
| Transmission-hydraulic system |
IVT: 160 L 42.2 U.S. gal. |
| Interval for engine oil change | 750 hours |
| Interval for hydraulic/transmission oil change | 1,500 hours |
| Interval for engine coolant change | 6,000 hours |
| Loader | 680R |
| Lift capacity at full height |
680R: 2453 kg 5408 lb |
| Maximum lift height |
680R: 4480 mm 176 in. |
| Country of manufacture | Germany |
| Date collected | 12-Nov-21 |
