9 Series Tractors | 9R 640

Tractors
John Deere
#6409rrw

Disclaimer |

Characteristics

  • Engine HP1: 691 Max  / 640 hp Rated
  • Fully integrated precision ag technology
  • e18™ PowerShift Transmission
  • Choice of three different cab and visibility packages
  • JD14X (13.6L) Engine

1Engine power PS (hp ISO) at max engine power speed (ECE-R120). John Deere Standard RES10080, SAE Standards J1995.

Note that this product is available in store only.
Get pre-approved for financing
SKU: 6409rrw Categories: , ,

Description

The 9 Series Tractors are built to defy convention. With more engine horsepower (390 – 640 engine hp) and efficient FT4 engine technology, these machines welcome a good challenge.

Specifications

Engine description JD14 (B20 diesel compatible)
Engine displacement 13.6 L
827 cu in.
Rated engine power 471 kW
640 hp
Maximum engine power 508 kW
691 hp
Rated PTO power (hp SAE) 249 kW
335 hp
Transmission type John Deere e18™ 18-speed PowerShift™ with Efficiency Manager™: 40 km/h
25 mph
Hydraulic pump rated output Standard: 208 L/min
55 gpm
Optional: 416 L/min
110 gpm
Rear hitch category (SAE designation) Category 4N/4: 6804 kg
15,000 lb
Category 4N/4: 9072 kg
20,000 lb
Base machine weight 21,174 kg
46,680 lb
Description JD14 (B20 diesel compatible)
Engine type In-line six, four valve
Engine family MJDXL13.5334
Rated speed 2100 rpm
Aspiration Dual series turbocharger with fixed geometry first stage and wastegated second stage; air-to-air aftercooling and cooled exhaust gas recirculation (EGR)
Cylinders liners Wet-sleeve
Emission level Final Tier 4 (FT4)
After treatment type Diesel oxidation catalyst (DOC)/selective catalytic reduction (SCR)
Displacement 13.6 L
827 cu in.
Rated power 471 kW
640 hp
Rated PTO power (hp SAE) 249 kW
335 hp
Power boost 8 percent
Maximum engine power 508 kW
691 hp
Engine peak torque At 1550 rpm: 2954 Nm
2179 lb-ft
PTO torque rise 38 percent
Type John Deere e18 18-speed PowerShift with Efficiency Manager: 40 km/h
25 mph
Type Closed-center, pressure-and-flow compensated
Pump rated output Standard: 208 L/min
55 gpm
Optional: 416 L/min
110 gpm
Available flow at a single rear SCV 1.3-cm (1/2-in.) couplers: 132 L/min
35 gpm
1.9-cm (3/4-in.) couplers: 159 L/min
42 gpm
Number of rear selective control valves (SCVs) Four to eight factory or field installed
Base: four 1.3-cm (1/2-in.) couplers
Optional: five to six 1.3-cm (1/2-in.) couplers factory installed
Optional: three 1.9-cm (3/4-in.) couplers plus five 1.3-cm (1/2-in.) couplers factory installed
SCV control Electronic
Hitch category (SAE designation) Category 4N/4: 6804 kg
15,000 lb
Category 4N/4: 9072 kg
20,000 lb
Maximum lift capacity behind lift points Category 4N/4: 9072 kg
20,000 lb
Sensing type Electrohydraulic with draft sensing
Drawbar category Category 5
Maximum vertical load 5440 kg
12,000 lb
Type Independent
44 mm (1.75 in.) 20-spline, 1000 rpm
PTO actuation Electrohydraulic
Type Diameter: 120 x 3048 mm
4.72 x 120 in.
Final drive type Inboard planetary with double-reduction axle
Rear differential lock Full-locking electrohydraulic
Type Diameter: 120 x 3048 mm
4.72 x 120 in.
Front axle differential lock Full-locking electrohydraulic
Turning radius with brakes Group 48 tires: 6.099 m
20 ft
Turning radius without brakes Group 47 or Group 48 tires: 6.035 m
19.8 ft
Type Standard: Hydraulic power steering
Optional: ActiveCommand Steering (ACS™)
Alternator size Standard: 250 amp
Optional: 330 amp
Battery options 12 V
Working lights Standard: 18 halogen
Optional: 18 or 24 LED plus 8 LED convenience lights
Type of bulb in headlight (Halogen, Zenon, LED) Standard: halogen, 65 W
Optional: LED
Total cold cranking amps 3 x 925 CCA
Total: 2775 CCA
Seat Degree of seat swivel, left hand
25 degree (angle)
Degree of seat swivel, right hand
40 degree (angle)
Standard: air suspension
Optional: ActiveSeat™ II
Instructional seat Standard
Display Standard: Generation 4 4600 CommandCenter™: 25.4 cm
10 in.
Optional: Extended monitor
Radio Standard: AM/FM stereo with weatherband, remote controls, auxiliary input jack, four speakers and external antenna
Optional: Touchscreen radio
Inner cab volume 3.27 m3
115 cu ft
Cab glass area 6.64 m2
71.47 sq ft
Wheelbase 3912 mm
154 in.
Overall length With front weights, excluding hitch and coupler: 7945 mm
312.8 in.
With front weights, including hitch and coupler: 8427 mm
331.8 in.
Drawbar clearance Group 48 tires: 527 mm
20.7 in.
Approximate shipping weight, Open;Cab 21,174 kg
46,680 lb
Base machine weight 21,174 kg
46,680 lb
Maximum ballast level 30,391 kg
67,000 lb
Crankcase oil volume 64 L
16.9 U.S. gal.
Fuel tank 1514 L
400 U.S. gal.
Diesel exhaust fluid (DEF) tank 120 L
31.7 U.S. gal.
Cooling system 56.5 L
14.9 U.S. gal.
Transmission-hydraulic system With 3-point hitch and PTO: 227 L
60 U.S. gal.
Without 3-point hitch and PTO: 220 L
58 U.S. gal.
Interval for engine oil change 500 hours
Interval for hydraulic/transmission oil change 1500 hours
Interval for engine coolant change 6000 hours
Guidance Integrated AutoTrac™
Telematic Available with JDLink™ hardware, activations, and Ethernet harnesses (availability dependent upon destination)
Remote diagnostics Available with activated JDLink hardware and activations
Country of manufacture USA
Date collected 22 January 2022