Description
Learn more about the features, specifications, and more for the HDF35 Flexible Cutterbar Draper Platform.
HDF35 Hinged Frame, Flexible Cutterbar Draper | Grain Harvesting
EquipmentJohn Deere
#hd35fh
Characteristics
- Capture more crop in rolling and uneven terrain with a total wing range of 30”
- Experience the best of both worlds with a flexible cutterbar on a hinged draper
- Reduce cutterbar loss with Grain Saver Draper Belts
- Improve harvest logistics with a factory-installed Integrated Transport system
Specifications
| Cutterbar length |
10.7 m 35 ft |
| Knife drive |
Double-cut, dual-drive, shaft-driven cutterbar: 10.2 cm 4 in. |
| Knife speed |
X Series Combine: 520 cycles/min S-Series Combine: 490 cycles/min |
| Pickup reel operating speeds | 8-70 rpm |
| Draper belts speed control | Hydraulic from cab (side belts only) |
| Type | Hinged frame flexible cutterbar |
| Type | Straight-line knife drive system |
| Length |
10.7 m 35 ft |
| Knife drive |
Double-cut, dual-drive, shaft-driven cutterbar: 10.2 cm 4 in. |
| Knife speed |
X Series Combine: 520 cycles/min S-Series Combine: 490 cycles/min |
| Base skid shoe height |
3.8 cm 1.5 in. |
| Number of slats |
Base: six bat poly Optional: steel tine |
| Fingers |
Base: nylon Optional: steel |
| Diameter |
106.7 cm 42 in. |
| Height control | Hydraulic |
| Speed control | Hydraulic |
| Reel lift |
Off the cutterbar: 100.6 cm 39.6 in. |
| Reel fore and aft |
Fore of the cutterbar: 26.4 cm 10.4 in. |
| Reel resume | Base |
| Reel reverse | Base |
| Operating speeds | 8-70 rpm |
| Width |
Side belts: 4.4 m 14.3 ft Center belts: 200 cm 79 in. |
| Belt depth |
100 cm 39.8 in. |
| Cleat height |
Cross belt cleat height: 19 mm 0.75 in. |
| Speed control | Hydraulic from cab (side belts only) |
| Center belt reverse | Base |
| Diameter |
40.6 cm 16 in. |
| Feed drum fingers |
Heavy-duty and round with breakaway notch and retainer Diameter: 16 mm 0.625 in. |
| Number of fingers | 18 |
| Auger finger platform | Triple chevron, retracting |
| Finger reach |
152 mm 6 in. |
| Drum/auger reverse | Base |
| Operating speed |
Low speed: 200 rpm High speed: 240 rpm |
| Center cleanout door | Base |
| Type | Electrohydraulic |
| Header height sensing on the ground | Base |
| Header height sensing off the ground | Base |
| Type |
Optional: hydraulic drive 250-350 rpm |
| Fingered augers | Optional |
| Size |
Diameter: 43.2 cm 17 in. |
| Platform length |
11.5 m 37.8 ft |
| Overall operating depth |
With dividers: 3.2 m 10.6 ft |
| Date collected | 24 Mar 2021 |
