HDR35 Hinged Frame, Rigid Cutterbar Draper | Grain Harvesting

Equipment
John Deere
#hd35rh

Disclaimer |

Characteristics

  • Capture more crop in rolling and uneven terrain with a wing range of over 30"
  • Achieve desired stubble height with Position Control Gauge Wheels
  • Reduce cutterbar loss with Grain Saver Draper Belts
  • Improve harvest logistics with a factory-installed Integrated Transport system

Note that this product is available in store only.
Get pre-approved for financing
SKU: hd35rh Categories: ,

Description

Learn more about the features, specifications, and more for the HDR35 Rigid Cutterbar Draper Platforms.

Specifications

Cutterbar length 10.7 m
35 ft
Knife drive Double-cut, dual-drive, shaft-driven cutterbar: 10.2 cm
4 in.
Knife speed X Series Combine: 520 cycles/min
S-Series Combine: 490 cycles/min
Pickup reel operating speeds 8-70 rpm
Draper belts speed control Hydraulic from cab (side belts only)
Type Hinged frame rigid cutterbar
Type Straight-line knife drive system
Length 10.7 m
35 ft
Knife drive Double-cut, dual-drive, shaft-driven cutterbar: 10.2 cm
4 in.
Knife speed X Series Combine: 520 cycles/min
S-Series Combine: 490 cycles/min
Base skid shoe height 3.8 cm
1.5 in.
Number of slats Base: six bat poly
Optional: steel tine
Fingers Base: nylon
Optional: steel
Diameter 106.7 cm
42 in.
Height control Hydraulic
Speed control Hydraulic
Reel lift Off the cutterbar: 100.6 cm
39.6 in.
Reel fore and aft Fore of the cutterbar: 26.4 cm
10.4 in.
Reel resume Base
Reel reverse Base
Operating speeds 8-70 rpm
Width Side belts: 4.4 m
14.3 ft
Center belts: 200 cm
79 in.
Belt depth 100 cm
39.8 in.
Cleat height Cross belt cleat height: 19 mm
0.75 in.
Speed control Hydraulic from cab (side belts only)
Center belt reverse Base
Diameter 40.6 cm
16 in.
Feed drum fingers Heavy-duty and round with breakaway notch and retainer
Diameter: 16 mm
0.625 in.
Number of fingers 18
Auger finger platform Triple chevron, retracting
Finger reach 152 mm
6 in.
Drum/auger reverse Base
Operating speed Low speed: 200 rpm
High speed: 240 rpm
Center cleanout door Base
Type Electrohydraulic
Header height sensing on the ground Base
Header height sensing off the ground Base
Type Optional: hydraulic drive
250-350 rpm
Fingered augers Optional
Size Diameter: 43.2 cm
17 in.
Platform length 11.5 m
37.8 ft
Overall operating depth With dividers: 3.2 m
10.6 ft
Date collected 24 Mar 2021