Description
The L331 Large Square Baler is built for more capacity, more efficiency, and more accuracy.
Baling Equipment | L331 Large Square Baler
EquipmentJohn Deere
#l331_e
Characteristics
- Bale Documentation with John Deere Operations Center™
- MegaWide™ pickup with MegaTough™ pickup teeth
- John Deere moisture sensor and weighing system
- BalerAssist™ drivetrain system
Specifications
| Bale |
80x90 cm 3x3 ft |
| Width |
80 cm 32 in. |
| Height |
90 cm 35 |
| Length |
60 up to 300 cm 24 up to 118 in. |
| Number of knotters | Four |
| Knives | 11, 7, or 6 |
| Machine - Width |
2.76 m 9.1 ft |
| Machine - Height |
2.7 m 8.9 ft |
| Machine - Weight |
7,700 kg 16,975 lb |
| Minimum tractor requirement |
86 kW 115 PTO hp - no Pre-Cutter 97 kW 130 PTO hp - with Pre-Cutter |
| Bale |
90x90 cm 3x3 ft |
| Width |
80 cm 32 in. |
| Height |
90 cm 35 in. |
| Length |
60 up to 300 cm 24 up to 118 in. |
| Intake width |
220 cm 86 in. |
| Pickup diameter |
25.6 cm 10 in. |
| Number of tine bars 4-5 | Four |
| Tine spacing |
6.6 cm 2.6 in. |
| Number of plunger strokes | 45 spm |
| Plunger stroke |
69.5 cm 27 in. |
| Density control | Three hydraulic cylinders |
| Bale chamber length |
305 cm 120 in. |
| Control | ISOBUS - GreenStar™ 2 1800 or GreenStar 3 2630 |
| Number of knotters | Four |
| Twine capacity (rolls) | 30 |
| High-capacity rotor | Yes |
| Knives | 11, 7, or 6 |
| Cutting length |
44 mm 1.7 in. or 88 mm 3.5 in. |
| Knife protection | Individual spring |
| Slide out floor | Yes |
| Single axle | 600/50/22.5 or 710/40R/22.5 |
| Tandem axle steered (optional) | 500/55/20 or 550/45/22.5 |
| Brakes system | Optional hydraulic |
| Length |
7.8 m 25.6 ft |
| Width |
2.76 m 9.1 ft |
| Height |
2.7 m 8.9 ft |
| Weight |
7,700 kg 16,975 lb |
| Minimum tractor requirement |
86 kW 115 PTO hp - no Pre-Cutter 97 kW 130 PTO hp - with Pre-Cutter |
