Description
328 Small Square Baler Hay and Forage Equipment from John Deere. Learn more about the features, specifications, and more for the 328 Small Square Baler Hay and Forage Equipment.
Small Square Balers | 328 Square Baler
EquipmentJohn Deere
#0328_e
Characteristics
- Full-width feeding pickup
- Adjustable hay compressor
- Deep-flighted auger feeding
- Accurate knotters
Specifications
| Minimum PTO |
26 kW 35 PTO hp |
| Pickup width |
187.9 cm 74 in. |
| Bale size |
Height x width 36x46 cm 14x18 cm Length 30.7 to 127 cm 12 to 50 in. |
| Adjustable Hydraulic Bale Density | Optional |
| Plunger - Strokes/minute | 80 spm |
| Height x width |
36 x 46 cm 14 x 18 in. |
| Length |
30.5 to 127 cm 12 to 50 in. |
| Pickup width |
187.9 cm 74 in. |
| Tooth bars/teeth | 4 bars, 104 teeth |
| Lift control | Crank (hydraulic optional) |
| Pickup diameter |
49.5 cm 19.5 in. |
| Diameter |
41 cm 16 in. |
| Length |
154.9 cm 61 in. |
| Strokes/minute | 80 spm |
| No. of knotters | 2 |
| Twine capacity | 4 |
| Twine type | Plastic or sisal |
| Central lube system | Optional |
| Length w/ long tongue |
576.5 cm 227 in. |
| Width |
274.3 cm 108 in. |
| Height |
170.2 cm 67 in. |
| Weight empty |
1208 kg 2685 lb |
| PTO speed | 540 rpm |
| Minimum PTO |
26 kW 35 PTO hp |
| Driveline | Equal angle 3 joint category 4 |
| Pickup | Belt |
| Plunger | Gear and shaft |
| Knotters | Gear and shaft |
| Feeder forks | Gear and shaft |
| Pickup | Belt slip |
| Needles | Shear bolt/plunger head stop |
| Knotters | Shear bolt |
| RH Standard tire size | 26x12.0-12, 4 ply |
| LH Standard tire size | 11L-14, 6 ply |
| Gauge Wheels | 1 optional |
| Pickup Gauge Wheels Tires Size | 16.5x6.50-8 |
| Adjustable Bale Density | Mechanical crank |
| Adjustable Hydraulic Bale Density | Optional |
| Bale Counter | Optional |
| Available | Optional |
| Short chute | Optional |
| Long chute |
Optional Regular bale chute standard |
| Side bale drop chute | Optional |
| Wagon hitch | Optional |
