Description
338 Small Square Baler Hay and Forage Equipment from John Deere. Learn more about the features, specifications, and more for the 338 Twine/Wire Baler Hay and Forage Equipment.
Small Square Balers | 338 Small Square Baler
EquipmentJohn Deere
#0338_e
Characteristics
- Full-width feeding pickup
- 540-rpm PTO power shaft
- Deep-flighted auger feeding
- Hydraulic bale tension available
Specifications
| Minimum PTO |
26 kW 35 PTO hp |
| Pickup width |
187.9 cm 74 in. |
| Bale size |
Height x width 36x46 cm 14x18 in. Length 30.5 to 127 cm 12 to 50 in. |
| Adjustable Hydraulic Bale Density | Optional |
| Plunger - Strokes/minute | 80 spm |
| Height x width |
36 x 46 cm 14 x 18 in. |
| Length |
30.5 to 127 cm 12 to 50 in. |
| Pickup width |
187.9 cm 74 in. |
| Tooth bars/teeth | 6 bars, 156 teeth |
| Lift control | Crank (hydraulic optional) |
| Pickup diameter |
49.5 cm 19.5 in. |
| Diameter |
41 cm 16 in. |
| Length |
154.9 cm 61 in. |
| Strokes/minute | 80 spm |
| No. of knotters | 2 |
| Twine capacity | 8 |
| Twine type | Plastic or sisal |
| Central lube system | Optional |
| Wire ball capacity | 4 |
| Length w/ long tongue |
576.5 cm 227 in. |
| Width |
274.3 cm 108 in. |
| Height |
170.2 cm 67 in. |
| Weight empty |
1272 kg 2805 lb |
| PTO speed | 540 rpm |
| Minimum PTO |
26 kW 35 PTO hp |
| Driveline | Equal angle 3 joint category 4 |
| Pickup | Belt |
| Plunger | Gear and shaft |
| Knotters | Gear and shaft |
| Feeder forks | Gear and shaft |
| Pickup | Belt slip |
| Needles | Shear bolt/plunger head stop |
| Knotters | Shear bolt |
| RH Standard tire size | 26x12.0-12, 4 ply |
| LH Standard tire size | 11L-14, 6 ply |
| Gauge Wheels | 1 optional |
| Pickup Gauge Wheels Tires Size | 16.5x6.50-8 |
| Adjustable Bale Density | Mechanical crank |
| Adjustable Hydraulic Bale Density | Optional |
| Available | Optional |
| Short chute | Optional |
| Long chute | Optional |
| Side bale drop chute | Optional |
| Wagon hitch | Optional |
