Primary Tillage | 2100 Minimum Till Ripper

Equipment
John Deere
#2100xh

We regret that we cannot comply with your request. We are currently making significant corrections to the site.
Get pre-approved for financing
SKU: 2100xh Categories: ,

Description

2100 Minimum Till Ripper Primary Tillage from John Deere. Learn more about the features and more for the 2100 Minimum Till Ripper Primary Tillage.

Specifications

Working width 2.3 m 7.5 ft
2.7 m 9 ft
3.05 m 10 ft
3.8 m 12.5 ft
4.6 m 15 ft
5.3 m 17.5 ft
6.8 m 22.5 ft
Transport width 3.05 m 10 ft
4.1 m 13.5 ft
5 m 16.5 ft
6.7 m 22 ft
4.7 m 15.5 ft
Operating depth Maximum
40.6 cm
16 in.
Miles per hour 6.4-8 km/h
4-5 mph
Horsepower per standard 22.3-29.8 kW
30-40 hp
Depending on soil type, moisture, and depth of operation
NOTE: Maximum compatible tractor engine - 231.2 kW
310 hp
Spacings 76.2 cm
30 in.
91.4 cm
36 in.
Type In-line ripper
Option 1 Standard: 3, spacing: 76.2 cm
30 in.
Option 2 Standard: 3, spacing: 91.4 cm
36 in.
Option 3 Standard: 4, spacing: 76.2 cm
30 in.
Option 4 Standard: 5, spacing: 76.2 cm
30 in.
Option 5 Standard: 5, spacing: 91.4 cm
36 in.
Option 6 Standard: 7, spacing: 76.2 cm
30 in.
Option 7 Standard: 9, spacing: 76.2 cm
30 in.
Rigid
Option 8 Standard: 9, spacing: 76.2 cm
30 in.
Folding
Option 1 2.3 m
7.5 ft
Option 2 2.7 m
9 ft
Option 3 3.05 m
10 ft
Option 4 3.8 m
12.5 ft
Option 5 4.6 m
15 ft
Option 6 5.3 m
17.5 ft
Option 7 6.8 m
22.5 ft
Option 8 6.8 m
22.5 ft
Option 1 3.05 m
10 ft
Option 2 3.05 m
10 ft
Option 3 3.05 m
10 ft
Option 4 4.1 m
13.5 ft
Option 5 4.1 m
13.5 ft
Option 6 5 m
16.5 ft
Option 7 6.7 m
22 ft
Option 8 4.7 m
15.5 ft
Maximum 40.6 cm
16 in.
Size 102x152x0.9.5 mm
4x6x0.375 in.
9 standard: 152x152x9.5 mm
6x6x0.35 in.
Maximum underframe clearance 89 cm
35 in.
Miles per hour 6.4-8 km/h
4-5 mph
Horsepower per standard 22.3-29.8 kW
30-40 hp
Depending on soil type, moisture, and depth of operation
NOTE: Maximum compatible tractor engine - 231.2 kW
310 hp
Option 1 3-point hitch for integral
Option 2 Single point for pull-type
Option 1 Pull type: 1 SCV (lift) at 17,237 kPa
2500 psi
for optimum raise times
Option 2 Low transport: 1 SCV (fold) at 17,237 kPa
2,500 psi
for optimum raise times
Options Integral, or 7- or 9-standard pull type
Three-point hitch requirements Category 2, Category 3 and 3N (with Quik-Coupler)
Pull-type description Level Lift
Spacings 76.2 cm
30 in.
91.4 cm
36 in.
Option 1 Trip force
Shear bolt: 3,265.9 kg
7,200 lb
Standard type
19 mm
0.75 in.
or 31.75 mm
1.25 in.
Straight with wear shin
Shear-bolt
Option 2 Trip force
1,451.5 kg
3,200 lb
Trip height
30.5 cm
12 in.
Standard type
19 mm
0.75 in.
Cushion trip
Options Standard: 19 mm (0.75 in.), min-till point: 178 mm (7 in.), low-disturbance: 254 mm (10 in.), ultra-low-disturbance: 63 mm (2.5 in.)
Standard: 31.75 mm (1.25 in.), Regular: 57 mm (2.25 in.), Capped: 57 mm (2.25 in.), Double-capped: 57 mm (2.25 in.)
LaserRip points: 70 mm (2.75 in.), 127 mm (5 in.), and 178 mm (7 in.)
Type Spring cushion coulters
Pounds of force Normal working load: 272.2 kg
600 lb
Deflection of: 10.2 cm
4 in.
Maximum trip load: 362.9 kg
800 lb
Deflection of: 20.3 cm
8 in.
Blades Straight or rippled: 559x4.5 mm
22x0.177 in.
Description Two adjustable wheels on 3-, 4-, 5- and 7-standard sizes. Four adjustable wheels on 9-standard integral only. Drawn hitch machines do not require stabilizer wheels.
Down force 113.4 kg
250 lb
Size 10.2x40.6 cm
4x16 in.
Spacing 19.05 to 35.6 cm
7.5 to 14 in.
Angle adjustments 0 to 15 degree (angle)
Type Stabilizer wheels
Wheels 52.1x20.3 cm
20.5x8 in.
Tires 10 PR
Description 12.5L-15 tires for 9-standard pull-type; 11L-15 tires for 7-standard, pull-type; 9-standard has 8-bolt hubs and spindles
Additional feature Replaceable wear shin
Option 1 Set back brackets