Tillage | 2430 Chisel Plow

Equipment
John Deere
#2430xn

Disclaimer |

Characteristics

  • Hydraulically-adjusted knife-edge rolling basket with internal scraper
  • TruSet™ Active improves tillage depth accuracy and makes adjustments for varying field conditions, such as tire sink in soft soils or residue build up on tires, with no need for operator input
  • Radial tires improve flotation and transport
  • New rear hitch adjusts side-to-side for easier hookups

Note that this product is available in store only.
Get pre-approved for financing
SKU: 2430xn Categories: , ,

Description

Adjust shank depth and rolling basket down-pressure on-the-go with exclusive TruSet™ technology on the 2430 Chisel Plow.

Specifications

Working widths - Rigid frame Option 1
3.56 to 5.28 m
11.67 to 17.33 ft
3.05 to 5.49 m
10 to 18 ft
Maximum depth Rigid, TruPosition: max: 20.32 cm
8 in.
Spring-reset TruDepth: max: 30.5 cm
12 in.
Miles per hour 8 to 11.3 km/h
5 to 7 mph
Horsepower per foot 14.7 to 24.5 kW/m
6.0 to 10 hp/ft
Rigid and TruPosition standards on spacing: 30.5 cm
12 in.
11 to 18.35 kW/m
4.5 to 7.5 hp/ft
Rigid and TruPosition standards on spacing of: 40.6 cm
16 in.
14.7 to 34.3 kW/m (6.0 to 14 hp/ft) - Spring-reset and TruDepth standards on spacing of: 30.5 cm (12 in.)
11 to 26.9 kW/m (4.5 to 11 hp/ft) - Spring-reset and TruDepth standards on spacing of 40.6 cm (16 in.)
Standard spacings - Inches 30.5 cm
12 in.
40.6 cm
16 in.
Type Drawn Rigid, 3-Section Drawn Flex C-Shank, 5-Section Drawn Flex C-Shank
Rigid frame Option 1
3.56 to 5.28 m
11.67 to 17.33 ft
Drawn rigid fold Option 1
5.3 to 6.25 m
17.5 to 20.5 ft
3-section Option 1
6.65 to 8.5 m
21.83 to 28 ft
Mainframe: 3.05 m
10 ft
Option 2
7.2 to 11.79 m
23.6 to 38.7 ft
Mainframe: 3.66 m
12 ft
Option 3
9.35 to 13.1 m
30.67 to 43 ft
Mainframe: 4.57 m
15 ft
5-section Option 1
13.4 to 16.66 m
44 to 54.67 ft
Mainframe: 3.66 m
12 ft
Option 2
14.33 to 19.2 m
47 to 63 (15 mainframe) ft
Mainframe: 4.57 m
15 ft
Rigid frame Option 1
3.05 to 5.49 m
10 to 18 ft
Drawn rigid fold Option 1
3.35 to 4.88 m
11 to 16 ft
3-section Option 1
4.67 m
15.33 ft
Mainframe: 3.05 m
10 ft
Option 2
5.36 m
17.58 ft
Mainframe: 3.66 m
12 ft
Option 3
6.27 m
20.58 ft
Mainframe: 4.57 m
15 ft
5-section Option 1
5.26 m
17.25 ft
Mainframe: 3.66 m
12 ft
Option 2
Mainframe: 6.1 m
20 ft
Mainframe: 4.57 m
15 ft
3-section Option 1
3.3 to 4.2 m
10.83 to 13.75 ft
Mainframe: 3.05 m
10 ft
Option 2
3.28 to 5.05 m
10.75 to 16.58 ft
Mainframe: 3.66 m
12 ft
Option 3
3.89 to 5.36 m
12.75 to 17.58 ft
Mainframe: 4.57 m
15 ft
5-section Option 1
4.37 to 4.98 m
14.33 to 16.33 ft
Mainframe: 3.66 m
12 ft
Option 2
4.4 to 5.3 m
14.42 to 17.42 ft
Mainframe: 4.57 m
15 ft
Maximum depth Rigid, TruPosition: maximum: 20.32 cm
8 in.
Spring-reset
TruDepth: maximum: 30.5 cm
12 in.
Miles per hour 8-11.3 km/h
5 to 7 mph
Horsepower per foot 14.7 to 24.5 kW/m kW
6.0 to 10 hp/ft
Rigid and TruPosition standards on spacing: 30.5 cm
12 in.
11 to 18.35 kW/m
4.5 to 7.5 hp/ft
Rigid and TruPosition standards on spacing of: 40.6 cm
16 in.
14.7 to 34.3 kW/m (6.0 to 14 hp/ft) - Spring-reset and TruDepth standards on spacing of: 30.5 cm (12 in.)
11 to 26.9 kW/m (4.5 to 11 hp/ft) - Spring-reset and TruDepth standards on spacing of 40.6 cm (16 in.)
Option 1 TruSet Tillage In-cab controls and Single-point crank-adjust
Option 2 Single-point crank-adjust
Description Floating Tubular T-Hitch: on Rigid and 3-section: 15.2x25.4 cm
6x10 in.
On 5-section: 15.2x30.5 cm
6x12 in.
Tubing High strength, box beam steel cross tubes: 10.2x10.2 cm
4x4 in.
End tubes, patented 4-bar tube-through-tube frame design, welded construction: 5.08x12.7 cm
2x5 in.
Fore-and-aft 340.4 cm
134 in.
Underframe clearance Rigid and TruPosition: 71.1 cm
28 in.
Spring-reset and TruDepth: 81.3 cm
32 in.
Inches 30.5 cm
12 in.
40.6 cm
16 in.
Option 1 Spec
3.2x5.08x81.3 cm
1.25x2x32 in.
Maximum operating depth
20.3 cm
8 in.
Underframe clearance
81.3 cm
32 in.
Spacing
30.5 cm
12 in.
40.6 cm
16 in.
Spring-reset
Option 2 Spec
3.2x5.08x71.1 cm
1.25x2x28 in.
Trip height
25.4 cm
10 in.
Maximum operating depth
30.5 cm
12 in.
Underframe clearance
71.1 cm
28 in.
Spacing
30.5 cm
12 in.
40.6 cm
16 in.
TruPosition
Option 3 Spec
3.2x5.08x81.3 cm
1.25x2x32 in.
Trip height
27.9 cm
11 in.
Maximum operating depth
30.5 cm
12 in.
Underframe clearance
81.3 cm
32 in.
Spacing
30.5 cm
12 in.
40.6 cm
16 in.
TruDepth
Choices Variety of sweeps, shovels, and chisel points
Centerframe depth control wheels and tires Option 1
Drawn Rigid: Castering Front and Walk-Over Tandem Rear with (6) IF280/70R15 134D Tires
Option 2
3-section: 6.4 to 8.7 m
21 to 28.7 ft
Center Frame - 10 ft
3.05 m
Castering Front with (2) IF280/70R15 134D Tires and Single Rear with (2) IF 320/70R15 144D Tires on Center Frames
Option 3
3-section mainframe of: 6.7 to 10.3 m
22 to 33.67 ft
(3.7-m [12-ft] Center Frame)
Castering Front and Walkover TandemTM Rear with (6) IF 280/70R15 134D Tires on Center Frames
Option 4
3-section: mainframe: 10.7 to 11.4 m
35 to 37.25 ft
(3.7-m [12-ft] Center Frame)
0 through 11.79 m
Castering Front and Walkover TandemTM Rear with (6) IF 280/70R15 134D Tires on Center Frame
Option 5
5-section: 13.4 to 16.8 m
44 to 55 ft
Castering Front and Walk-over™ Tandem Rear with (6) IF 320/70R15 144D Tires on Center Frames
Option 6
5-section: 18.6 m
61 ft
Castering Front and Walk-over™ Tandem Rear with (2) IF 320/70R15 144D Tires on Center Frames (4) 285/70R19.5
Wing frame wheels and tires Option 1
3-section: (6) 11L-15FI Load Range D
Option 2
5-section: 13.4 to 16.8 m
44 to 55 ft
Castering Front with (2) 11L-15FI Load Range D and Walk-over™ Tandem Rear with (4) 12.5L-15FI Load Range F on Inner Wing Frames
Castering Front and Walkover Tandem Rear with (6) 11L-15FI Load Range D on Outer Wing Frames
Option 3
5-section: 18.6 m
61 ft
Castering Front (2) 280/70R15 and Walk-over™ Tandem Rear with (4) 320/70R15 on Inner Wing Frames
Castering Front and Walk-over™ Tandem Rear with (6) 280/70R15 on Outer Wing Frames
Tubing size Rectangular box construction: 7.62x12.7 cm
3x5 in.
Telescoping Yes
Tongue weight rating 45.4 kg
100 lb
GVW 10,000
Wiring harness for transport lights includes Y-harness, allowing both the 2430 and towed implement lights to work simultaneously
Hydraulic hoses and couplers Available as field attachment
Description 3-year frame and standard warranty
Opton 1 Rear Attachment Options:
-Coil-tine Harrow
-Hydraulic Knife-edge Rolling Basket