Aeration│Aercore™ 800

Aeration equipment
John Deere
#800actc

Disclaimer |

Characteristics

  • 31.5-in. (80-cm) coring
  • Lightweight design
  • Drive tire core deflectors

Note that this product is available in store only.
Get pre-approved for financing
SKU: 800actc Categories: , ,

Description

John Deere Aercore 800 series aerators.

Specifications

Horsepower AT 3600 rpm: 18.6 kW
25 hp
Engine Manufacturer Gross Power per SAE J1940. Tested in accoradance with SAE J1995. The engine hp and torque information are provided by the engine manufacturer for comparison purposes only. Actual operating hp and torque will be less. Refer to the engine manufacturer's website for additional information
Swath width 800.1 mm
31.5 in.
Attachments installed Tines; verticutter
Lift system type Electro-hydraulic, electric pump, single hydraulic actuator; does not require engine to be running to lift/lower
Horsepower AT 3600 rpm: 18.6 kW
25 hp
Engine Manufacturer Gross Power per SAE J1940. Tested in accoradance with SAE J1995. The engine hp and torque information are provided by the engine manufacturer for comparison purposes only. Actual operating hp and torque will be less. Refer to the engine manufacturer's website for additional information
Cycle Four
Displacement 725 cc
44.2 cu in.
Fuel capacity 18.9 L
5 U.S. gal.
Fuel mixture Regular unleaded, leaded
Ignition Solid State
Air filter Dual stage
Starter Electric/Solenoid
1st gear Mechanical
2nd gear Mechanical
3rd gear Mechanical
4th gear Mechanical
Speed 5.6 km/h
3.5 mph
One steer tire 20x10-10, 55-69 kPa
20x10-10, 8-10 psi
Two drive tires 20x10-10, 55-69 kPa
20x10-10, 8-10 psi
Swath width 800.1 mm
31.5 in.
Type Matched dual V-belts
Type Electro-hydraulic, electric pump, single hydraulic actuator; does not require engine to be running to lift/lower
1st gear 11,025 sq ft/hr
1024 sq m/hr
2nd gear 15,750 sq ft/hr
1440 sq m/hr
3rd gear 20,710 sq ft/hr
1933 sq m/hr
4th gear 22,835 sq ft/hr
2123 sq m/hr
Range of depth Up to 88.9 mm
3.5 in.
1st gear With mini tines: 36x36 mm
1.4x1.4 in.
2nd gear 50x50 mm
2.0x2.0 in.
3rd gear 65x50 mm
2.6x2.0 in.
4th gear 75x50 mm
2.9x2.0 in.
Availability Standard
Weight 595 kg
1312 lb
Height 1110 mm
44 in.
Width 1473 mm
58 in.
Length 2134 mm
84 in.
Operator ear With tines only: 85 dBA
With tines and verticutter: 86 dBA
Measuring standard ISO 11201
Attachments installed Tines; verticutter