Description
8000A E-Cut Hybrid 3-Wheel Fairway Mower, featuring programmable TechControl Display.
Home / Equipment / Golf Equipment / Fairway Mowers /
Fairway Reel Mowers | 8000A E-Cut™ Hybrid
Fairway MowersJohn Deere
#800avtc
Caracteristics
- TechControl™ Display locks in performance, and uptime
- Final Tier 4 without sacrificing horsepower
- Proven hybrid design eliminates hydraulics from reel circuit
- Highly maneuverable, 3-wheel low PSI smooth tire configuration
Please note that this product is not available online.
Request a quote
Specifications
| Maximum rated horsepower |
At 2800 rpm ISOC: 31 kW 41.6 hp |
| Drive pump | N/A due to Electric Driven Cutting units |
| Ground pressure |
69 kPa 10 psi |
| Throttle | Automatic controls with AutoPedal foot controls; manual control through TechControl display |
| Operator display | TechControl Display; Located on Command Arm; displays machine warnings, on-board electrical diagnostics; service timers on large easy to read screen; quick on the go settings for mow and transport speed; Turn Speed; Loadmatch™ and ON/OFF Cruise Control Use selection: all settings are pass code protected |
| Mowing speed |
12.8 km/h 8 mph |
| Cutting unit size |
Quick Adjust QA5: 45.7 cm 18 in. |
| Total width of cut |
203 cm 80 in. |
| Reel diameter |
12.7 cm 5 in. |
| Frequency of clip (FOC Reels) OR Blade tip speed (decks) |
11 Blade: 0.69 mm/km/h 0.044 in./mph 7 blade: 1.09 mm/km/h 0.069 in./mph |
| Type | Direct Inject Turbocharged Diesel |
| Compliant emission regulation | United States and Canada Tier 4 |
| Horsepower |
Maximum rated horsepower At 2800 rpm ISOC: 31 kW 41.6 hp |
| Cylinders | Three |
| Displacement |
1.568 L 95.69 cu in. |
| Air cleaner | 2-stage dry element |
| Fuel | Diesel Up to B20 compliant |
| Cooling system | Liquid centrifugal pump; forward machine location for optimum cooling |
| Drive pump | N/A due to Electric Driven Cutting units |
| Hydraulic system capacity |
37.8 L 10 U.S. gal. |
| Fuel tank capacity |
45.4 L 12 U.S. gal. |
| Steering | Hydraulic power with double acting steering cylinder |
| Front drive tires | 24x13x12 smooth |
| Steering tires | 24x13x12 smooth |
| Ground pressure |
69 kPa 10 psi |
| Brakes | Internal hydraulic wet disc brakes with dynamic braking through closed loop hydrostatic system |
| ROPS | Standard; meets ISO 21299 Standard |
| Cutting units lowered |
2131 lb 967 kg |
| Throttle | Automatic controls with AutoPedal foot controls; manual control through TechControl display |
| Forward/reverse | 2-pedal |
| Mower lift | One-touch single handle |
| Parking brake | Electric Switch on Command Arm for Internal Wet Disk Brakes |
| Seat | Suspension seat with seat belts and arm rest; fore/aft adjustment; weight and lumbar adjustment |
| PTO | Electric Switch on Command Arm |
| Tilt steering | Left Foot operated for easy adjustment |
| Operator display | TechControl Display; Located on Command Arm; displays machine warnings, on-board electrical diagnostics; service timers on large easy to read screen; quick on the go settings for mow and transport speed; Turn Speed; Loadmatch™ and ON/OFF Cruise Control Use selection: all settings are pass code protected |
| Storage | Cup holder; two-way radio; large operator storage located on left hand side of operator station |
| Height with ROPS |
210.8 cm 83 in. |
| Length |
292 cm 115 in. |
| Transport width |
89 in. 226 cm |
| Mowing position width |
236 cm 93 in. |
| Ground speed |
Mowing 12.8 km/h 8 mph Transport 19.3 km/h 12 mph Reverse 9.6 km/h 6 mph |
| Number | Five |
| Size |
Quick Adjust QA5: 45.7 cm 18 in. |
| Total width of cut |
203 cm 80 in. |
| Height of cut |
Construction Requires option bedknife for lowest HOC and 76.2 mm (3 in.) roller for highest: 2-28.5 mm 0.078-1.125 in. |
| Frequency of clip (FOC Reels) OR Blade tip speed (decks) |
Rollers Front and rear: 51 in. 2 in. Optional: 76.2 mm 3 in. 11 Blade: 0.69 mm/km/h 0.044 in./mph 7 blade: 1.09 mm/km/h 0.069 in./mph |
| Reel diameter |
12.7 cm 5 in. |
| Measuring standard | ISO 11201 |
| Attachments installed | FTCs, reels engaged |
| Actual Fuel usage will vary depending on course conditions, operation, turf and fuel quality |
25% load: 2.8 L/hr 0.74 gph 40% load: 4.32 L/hr 1.14 gph 50% load: 5.22 L/hr 1.38 gph |
| Type | Two-year limited |
| Type | ANSI B71.4-2012 |
