Home / Equipment / Golf Equipment / Riding Greens Mowers / 2750 E-Cut™ Hybrid Triplex Mower | Riding Greens Mowers

2750 E-Cut™ Hybrid Triplex Mower | Riding Greens Mowers

2750 E-Cut™ Hybrid Triplex Mower | Riding Greens Mowers

Riding Greens Mowers
John Deere
#2750_e-cut

Disclaimer

Caracteristics

  • 19 hp* (14.2 kW) Diesel engine w/ electronic throttle control
  • Electric Reel Drive 
  • Same cut quality, regardless of operator
  • TechControl advanced supervisory controls 
  • Frequency of Clip mode
  • Premium Contour Following

Please note that this product is not available online.
Get pre-approved for financing
SKU: 2750_e-cut Categories: , ,

Description

2750 E-Cut™ Hybrid Triplex Mower will change the way you think about mowing greens.

Specifications

Number of cylinders Three
Displacement 993 cc
60.6 cu in.
Mowing speed 0 to 9.7 km/h
0 to 6 mph
Adjustable via passcode-protected TechControl display
Cleanup Pass mode also selectable
Reel drive Electric
Reel power source Alternator: 56 V
100 amp
Mower size Quick Adjust 5 (QA5) floating, standard: 55.9 cm
22 in.
Clip frequency 14-blade: 0.54 mm/km/h
0.034 in./mph
11-blade: 0.69 mm/km/h
0.044 in./mph
7-blade: 1.08 mm/km/h
0.069 in./mph
Adjustable in TechControl display
Reel diameter 12.7 cm
5 in.
Height-of-cut With 51 mm (2-in.) front roller: 2-36 mm
0.079-1.42 in.
With 76.2 mm (3-in.) front roller: 4-46 mm
0.16-1.81 in.
Mowing position width 157.5 cm
62 in.
Type Yanmar® 3TNV74F, indirect injection, electronically controlled
Engine horsepower At 3600 rpm: 14.6 kW
19.6 hp
Engine manufacturer gross power, tested in accordance with SAE J1940 / J1995
Air cleaner Semi cyclone, dry type, dual stage, 1/4 turn
Cooling Liquid
Oil filter Full-flow filter
Engine oil capacity With filter: 2.2 L
2.3 U.S. qt
Pressurized lubrication system Standard
Number of cylinders Three
Displacement 993 cc
60.6 cu in.
Charging system Flywheel, alternator
Alternator capacity 55 amp
Ignition CDI
Battery type BCI group 51 maintenance free - 12 V
Starter Electric (solenoid shift)
Wheels and tires Front
20x10-10 (smooth, smooth balloon, or turf tread)
Rear
20x10-10 (smooth, smooth balloon, or turf tread)
Brakes Type
Hand lever operated, two-wheel disc brakes
Mowing speed 0 to 9.7 km/h
0 to 6 mph
Adjustable via passcode-protected TechControl display
Cleanup Pass mode also selectable
Transport speed 0 to 17.7 km/h
0 to 11 mph
Adjustable via passcode-protected TechControl display
Reverse speed 0 to 6.4 km/h
0 to 4 mph
Ground clearance with catcher 11.4 cm
4.5 in.
Fuel tank capacity 20 L
5.3 U.S. gal.
Muffler Three chamber, round
Hydrostatic capacity (total) 20 L
5.3 U.S. gal.
Hydrostatic reservoir capacity (only) 16 L
4.2 U.S. gal.
Ground drive, reel drive Traction drive
eHydro™ - electronically controlled hydraulic traction pump; dual pedal
Reel drive
Electric
Reel power source
Alternator: 56 V
100 amp
Reel control
Independent electronic reel controllers
Hydraulic filtration 8 micron
Number Three
Size QA5 floating, standard: 55.9 cm
22 in.
Backlapping Engagement/disengagement and rpm controlled through passcode-protected Tech Control display
Clip frequency 14-blade: 0.54 mm/km/h
0.034 in./mph
11-blade: 0.69 mm/km/h
0.044 in./mph
7-blade: 1.08 mm/km/h
0.069 in./mph
Adjustable in TechControl display
Front rollers Optional smooth, grooved, spiral, or MT: 5.1 cm
2 in.
Optional smooth, grooved, or spiral: 7.6 cm
3 in.
Reel diameter 12.7 cm
5 in.
Bedknife adjustment Bedknife-to-reel
Height-of-cut With 51 mm (2-in.) front roller: 2-36 mm
0.079-1.42 in.
With 76.2 mm (3-in.) front roller: 4-46 mm
0.16-1.81 in.
Number of blades 7, 11 or 14
Mower lift Three independent hydraulic cylinders
Lift rate, lower rate, and front-to-rear timing adjustable via passcode-protected TechControl display
Steering Hydraulic, gear pump with double-acting steering cylinder
No-tool adjustable column and tilt wheel
Reel lift Right-hand joystick control for lift/lower
Three independent hydraulic cylinders
Lift rate, lower rate, and front-to-rear timing adjustable via passcode-protected TechControl display
Throttle Electronically controlled
AutoPedal™ foot controls in transport
PTO rpm control through TechControl display
Three modes: Max, Eco, Min
Park brake Mechanical hand lever to left of seat
Reel drive Yellow two-position switch for power take-off (PTO) on right-hand CommandARM™ console
Glow plug switch and indicator light Glow plugs with automatic timer. Indicator on TechControl when engaged. Start after glow plug relay turns off.
Hydrostatic speed Forward
Electronic, right foot operated, located to left of reverse pedal
Reverse
Electronic, right foot operated, located to right of forward pedal
Ignition Key start and shutoff
Engine oil pressure Warning icon and diagnostic trouble code on TechControl display
Alternator Warning icon and diagnostic trouble code on TechControl display
Hydraulic oil temperature Warning icon and diagnostic trouble code on TechControl display
Engine coolant temperature Warning icon and diagnostic trouble code on TechControl display
Hourmeter Digital on main TechControl operating screen
Diagnostics On-board diagnostics with TechControl display
Safety interlocks Operator presence switch (in seat), neutral, mow/transport switch, park brake set switch
Number ANSI B71.4-2017
ROPS Two-post SAE J21294 rollover protective structure with seat belts meets ISO 21299 standards
Engine Meets Environmental Protection Agency (EPA) and California Air Resources Board (CARB) requirements
Wheelbase Front to rear: 130 cm
51.2 in.
Tread width 157.2 cm
61.9 in.
Mowing position width 157.5 cm
62 in.
Turning radius uncut circle 45.7 cm
18 in.
Weight (full fluids, no operator or fuel) Standard seat, reels down: 641 kg
1410 lb
Full engine rpm With GTC and power brush attachments
Max mode: 83 dBA
Reduced engine rpm (2250) With GTC and power brush attachments
Eco mode: 81 dBA
Date collected 30-Sept-2019

Related products