Home / Equipment / Golf Equipment / Walk Greens Mowers / 220 SL PrecisionCut™ | Walk Green Mowers

220 SL PrecisionCut™ | Walk Green Mowers

220 SL PrecisionCut™ | Walk Green Mowers

Walk Greens Mowers
John Deere
#220sam

Disclaimer

Caracteristics

  • Adjustable, loop-style handlebar for maximum comfort and control
  • Rubber isolators for reduced vibration
  • Easily accessible bedknife-to-reel adjustment

Please note that this product is not available online.
Get pre-approved for financing
SKU: 220sam Categories: , ,

Description

John Deere 220SL PrecisionCut Walk Greens Mowers.

Specifications

Engine Type Air-cooled, Gas
Horsepower At 3600 rpm: 2.4 kW
3.2 hp
Engine manufacturer net power, tested in accordance with SAE J1349. The engine horsepower and torque information are provided by the engine manufacturer to be used for comparison purposes only. Actual operating horsepower and torque will be less. Refer to the engine manufacturer’s website for additional information.
Cutting width 55.9 cm
22 in.
Frequency of clip standard 11 blade, 14 blade: 4.62 mm
0.182 in.
Optional speed up kit 11 blade, 14 blade: 3.94 mm
0.155 in.
Reel diameter, in. (mm) 127 mm
5 in.
Number of blades 11 or 14 blade
Traction drum Dual, aluminum
Forward speed With transport wheels at 3000 engine rpm: 7.2 km/h
4.5 mph
Weight (less GTC's, gear drive and transport wheel, with catcher) 99.5 kg
219 lb
Operator ear 82 dBA
Type Air-cooled, Gas
Cycle 4-cycle
Bore and stroke 60x42 mm
2.36x1.65 in.
Piston displacement 122 cc
7.4 cu in.
Compression ratio 8:5:1
Horsepower At 3600 rpm: 2.4 kW
3.2 hp
Engine manufacturer net power, tested in accordance with SAE J1349. The engine horsepower and torque information are provided by the engine manufacturer to be used for comparison purposes only. Actual operating horsepower and torque will be less. Refer to the engine manufacturer’s website for additional information.
Direction of rotation of output shaft Counterclockwise viewed from shaft side
Inclination limit Tilted up to 20 degrees in any direction
Idle speed at output shaft 1700 (+/- 100) rpm
Maximum speed at output shaft 2950 (+/-150) rpm
Type Regular grade unleaded or leaded
Tank capacity 2.5 L
0.66 U.S. gal.
Type SAE 30 or SAE 10W-30
Capacity 0.6 L
0.63 U.S. qt
Differential drive capacity 0.14 L
0.3 pt
Cutting width 55.9 cm
22 in.
Cutting height (minimum) Standard - 3.0 mm bedknife
Min. 3.2 mm
0.125 in.
Max. 22 mm
0.875 in.
option
Optional - 2.5 mm bedknife
Min. 2.5
0.098 in.
Max. 22 mm
0.875 in.
standard
Optional - 2.0 mm bedknife
Min 2.0
0.078 in.
Max. 22 mm
0.875 in.
option
Frequency of clip standard 11 blade, 14 blade: 4.62
0.182 in.
Optional speed up kit 11 blade, 14 blade: 3.94 mm
0.155 in.
Diameter, in. (mm) 127 mm
5 in.
Number of blades 11 or 14 blade
Material Heat-treated chromium molydenum steel
Brush Interlocked with reel, rotation in reverse direction; 2-3/8-in. (60-mm) diameter nylon
Vertical cutter blades Specially hardened carbon tool steel; star shaped; 2-3/8-in. (60-mm) diameter, 75 blades
Adjustable brush or cutter height Brush even with height-of-cut; GTC below height-of-cut maximum: 0.8 mm
0.0313 in.
Gear drive Gear driven from reel shaft, opposite direction of reel, rotation powers brush or vertical cutter
Size 2.7 K
6 lb
Type Polyethylene
Transport Belt tension
Reel jaw-type clutch On/off
Brush/GTC jaw-type clutch On/off
Traction drum Dual, aluminum
Forward speed With transport wheels at 3000 engine rpm: 7.2 km/h
4.5 mph
Roller (rear) Aluminum, diameter: 190 mm
7.5 in.
Roller (front) (grooved or smooth) Machined steel, diameter: 50 mm
2 in.
for cutting height adjustment
Length (w/tires installed) 940 mm
37 in.
Width (w/tires installed) 94.6 cm
37.25 in.
Height (w/tires installed) 119 cm
47 in.
Weight (less GTC's, gear drive and transport wheel, with catcher) 99.5 kg
219 lb
Operator ear 82 dBA
Measuring standard ISO 11201
Attachments installed GTCs, reels engaged
Type ANSI B71.4-2004

Related products